Connect with us

SpaceX

SpaceX’s first Block 5 Falcon Heavy days away from critical static fire test

(SpaceX)

Published

on

The first commercial launch of SpaceX’s Falcon Heavy rocket – this time in a Block 5 configuration – is as few as ten days away from a targeted window beginning at 6:36 pm EST (22:36 UTC), April 7th. That target hinges on whether Falcon Heavy is ready and able to roll out to Pad 39A and successfully conduct its first integrated static fire, currently scheduled on April 1st.

The payload for this mission – communications satellite Arabsat 6A – had its original Lockheed Martin manufacturing and SpaceX launch contracts signed back in the first half of 2015, while the 6000 kg (13,200 lb) spacecraft was effectively completed once it was shipped from California to Florida at the start of 2019. After approximately 12 months of delays from an original launch target shortly after Falcon Heavy’s 2018 debut, Arabsat 6A’s four-year journey will hopefully reach completion in a geostationary transfer orbit. At the same time, the US Air Force says that it will be watching this launch – and the one meant to follow soon after – as a critical test along the path to fully certifying the powerful rocket for military launches.

As a pathfinder for an unproven rocket, SpaceX’s first Falcon Heavy launch suffered a number of likely minor to moderate anomalies as company engineers and technicians learned for the first time how the rocket actually behaves in the real world, under real-world conditions and operations. Case in point, the first integrated Falcon Heavy was taken through its first wet-dress rehearsal – in which the vehicle is filled with a flight load of fuel and oxidizer – on January 11th. An anomaly required additional work and took nearly two weeks to resolve, culminating in the rocket’s first (and successful) static fire on January 24th. An additional two weeks after that, SpaceX went ahead with the first attempted launch of Falcon Heavy with great success, pushing the T-0 back several hours due to weather but ultimately completed an almost flawless debut, aside from an anomaly that caused the center core to impact the ocean surface at high speeds.

Despite the invaluable experience gained by those orchestrating the launch and those who built the vehicle, Falcon Heavy’s second launch may result in similar teething pains, particularly due to the fact that the rocket’s complete upgrade to Block 5 hardware likely necessitated significant design changes across the board. In other words, the rocket SpaceX aims to launch in early April may be quite a bit different from the vehicle that launched 14 months prior, creating much of the same uncertainty inherent in the first launch(es) of any new rocket. Still, many of the complex boosters’ connection and separation mechanisms that were flight-tested for the first time that February were likely more or less unchanged in the move from Block 2/3 to Block 5 hardware.

Falcon Heavy prior to its first static fire test, January 2018. (SpaceX)

“Again, I don’t want to tempt fate. But this is a much stronger octaweb structure. It’s made of a much higher strength of bolted aluminum. A 7000 series instead of a 2000 series. So the strength of the octaweb is dramatically greater. It also has quite a bit of thermal protection in case there’s say, an engine fire, or something like that. Such that it does not melt the octaweb.” – SpaceX CEO Elon Musk, May 2018

“Biggest process change [for Block 5] was eliminating Tig welding of the thrust structure or “Octaweb” and the move to a bolted design but this made it much easier and faster to produce overall as well.” – SpaceX VP of Production Andy Lambert, April 2018

A step further, SpaceX CEO Elon Musk has indicated that one major section of Block 5 upgrades – moving from a welded to a bolted thrust structure (i.e. octaweb) – was expected to be a boon for Falcon Heavy, while also making octawebs far easier to manufacture, assemble, and even disassemble. According to Musk, new bolted octawebs are also “dramatically” stronger, a boon for Falcon Heavy boosters – particularly the center core – that need to survive forces multiple times stronger than those subjected upon Falcon 9 first stages.

Falcon 9’s engine section is an extremely strong structure known as an octaweb. (SpaceX)

Meanwhile, according to comments made by Air Force officials to Spaceflight Now, the USAF is looking at SpaceX’s Arabsat 6A and subsequent STP-2 Falcon Heavy launches as critical steps along the way to fully certifying the rocket for valuable military payloads. Currently, the only option available for military and NRO payloads past a certain weight or in need of exceptionally high-energy orbits is ULA’s Delta IV Heavy rocket, an extremely expensive ($300M+ per launch) rocket with a bad track record of schedule reliability.

An Air Force spokesperson this week confirmed the agreement to use previously-flown side boosters for the STP-2 mission. The center core will be new for the Arabsat 6A and STP-2 launches.

“This provides an early opportunity for the Air Force to understand the process for using previously-flown hardware with the goal to open future EELV missions to reusable launch vehicles,” the spokesperson said in response to an inquiry from Spaceflight Now.

Advertisement

Given that STP-2 will need to reuse both of the Arabsat 6A Falcon Heavy’s side boosters, the USAF official also specifically noted that the military branch would be examining SpaceX’s refurbishment processes and the performance of the flight-proven stages with the intention of ultimately allowing reused rockets to launch military satellites. As such, the successful launch, landing, refurbishment, and re-launch of both Falcon Heavy side boosters (B1052 & B1053) will be doubly critical for SpaceX.

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

Elon Musk

The Starship V3 static fire everyone was waiting for just happened

SpaceX fired all 33 Raptor 3 engines on Starship V3 today clearing the path for Flight 12.

Published

on

By

SpaceX Starship V3 from Starbase, Texas on April 14, 2026

SpaceX is that much closer to launching their next-gen Starship after completing today’s full duration static fire of all 33 Raptor 3 engines out of Starbase, Texas. This marks the most powerful rocket engine test ever conducted and a direct signal that Flight 12, the maiden voyage of Starship V3, is imminent. SpaceX confirmed the test on X, posting that the full duration firing was completed ahead of the vehicle’s next flight test.

The road to today started on March 16, when Booster 19 completed a shorter 10-engine static fire, also at the newly constructed Pad 2. That test ended early due to a ground systems issue but confirmed all installed Raptor 3 engines started cleanly. Booster 19 returned to the Mega Bay, received its remaining 23 engines for a full complement of 33, and rolled back out this week for the complete test campaign. Musk confirmed earlier this month that Flight 12 is now 4 to 6 weeks away.

Countdown: America is going back to the Moon and SpaceX holds the key to what comes after

The numbers behind today’s test are genuinely hard to put in context. Each Raptor 3 engine produces roughly 280 tons of thrust, and with all 33 firing simultaneously, this generates approximately 9,240 tons of combined thrust, more than any rocket in history. For context, that’s enough thrust to lift the entire Empire State Building, and then some. V3 stands 408 feet tall and can carry over 100 tons to low Earth orbit in a fully reusable configuration. The V2 generation topped out at around 35 tons.

Historically, a successful full-duration static fire is the last major ground milestone before launch. SpaceX has followed this pattern with every Starship iteration since the program began in 2023.  Musk has been direct about the ambition behind all of it. “I am highly confident that the V3 design will achieve full reusability,” he wrote on X earlier this year. Full reusability of both stages is the foundation of SpaceX’s plan to make regular flights to the Moon and Mars economically viable. Today’s test brings that goal one significant step closer.


Starship V3 delivers on two most critical promises of full reusability and in-orbit refueling. The reusability case is straightforward, and one we have seen with Falcon 9 wherein the rocket can fly again within a day rather than building a new one for every mission. It’s the only economic model that makes frequent lunar cargo runs viable. The in-orbit refueling piece is less obvious but equally essential. To reach the Moon with enough payload, Starship requires roughly ten dedicated tanker flights to fuel up a propellant depot in low Earth orbit before it can even begin its journey to the lunar surface. That capability has never been demonstrated at scale, and Flight 12 is the first step toward proving it works. As Teslarati reported, NASA’s Artemis II crew completed a historic lunar flyby earlier this month, the first humans to travel beyond low Earth orbit since 1972, but getting astronauts to actually land and eventually supply a permanent Moon base requires a cargo pipeline that only a fully reusable, refuelable Starship V3 can deliver at the volume and cost NASA’s plans demand.

SpaceX Starship full duration static fire on April 14, 2026 from Starbase, Texas (Credit: SpaceX)

SpaceX Starship full duration static fire on April 14, 2026 from Starbase, Texas (Credit: SpaceX)

Continue Reading

Elon Musk

SpaceX is keeping the Space Station alive again this weekend

SpaceX’s Falcon 9 launches Northrop Grumman’s Cygnus NG-24 to the ISS with 11,000 pounds of cargo Saturday.

Published

on

By

spacex-investment-alphabet-profit

SpaceX is targeting April 11 for the launch of Northrop Grumman’s Cygnus XL cargo spacecraft to the International Space Station, carrying over 11,000 pounds of supplies, science hardware, and equipment for the Expedition 73 crew aboard. Liftoff is set for 7:41 a.m. ET from Space Launch Complex 40 at Cape Canaveral Space Force Station, with a backup window available April 12 at 7:18 a.m. ET.

The mission, officially designated NG-24 under NASA’s Commercial Resupply Services program, names its spacecraft the S.S. Steven R. Nagel in honor of the NASA astronaut who flew four Space Shuttle missions and logged over 723 hours in space before his death in 2014. Unlike SpaceX’s own Dragon capsule, which docks autonomously, Cygnus relies on NASA astronauts to capture it using a robotic arm before it is berthed to the space station’s module for unloading. When the mission wraps up around October, the Cygnus will depart loaded with station trash and burn up on reentry.

Countdown: America is going back to the Moon and SpaceX holds the key to what comes after

This is the second flight of the Cygnus XL configuration, which debuted on NG-23 in September 2025 and offers a roughly 20% increase in cargo capacity over the previous design. Northrop Grumman switched to Falcon 9 launches after its own Antares 230+ rocket was retired in 2023 following supply chain disruptions from the war in Ukraine.

The upcoming cargo includes a new module to advance quantum research, and an investigation studying blood stem cell production in microgravity with potential therapeutic applications on Earth.

The NG-24 mission is one piece of a much larger picture for SpaceX and the U.S. government. As Teslarati reported, SpaceX has become an indispensable launch provider for U.S. national security missions, picking up a $178.5 million Space Force contract in April 2026 to launch missile tracking satellites, while also holding roughly $4 billion in NASA contracts tied to the Artemis lunar program.

At a time when no other American rocket can match the Falcon 9’s combination of reliability, cost, and launch cadence, Saturday’s mission is a straightforward reminder of how much the U.S. government now depends on a single commercial provider to keep its astronauts supplied and its satellites flying.

Continue Reading

Elon Musk

Elon Musk’s Terafab project locks up massive new partner

Terafab, first revealed by Musk in March, is a massive joint-venture semiconductor complex planned for the North Campus of Giga Texas in Austin.

Published

on

Credit: SpaceX

Elon Musk’s Terafab project just locked up a massive new partner, just weeks after the new project was announced by Tesla, SpaceX, and xAI, the three companies that will be direct benefactors from it.

In a landmark announcement on April 7, Intel joined Elon Musk’s Terafab project as a key partner alongside Tesla, SpaceX, and xAI. The collaboration focuses on refactoring silicon fabrication technology to deliver ultra-high-performance chips at unprecedented scale.

Intel CEO Lip-Bu Tan hosted Musk at Intel facilities the prior weekend, underscoring the partnership’s momentum with a public handshake.

Terafab, first revealed by Musk in March, is a massive joint-venture semiconductor complex planned for the North Campus of Giga Texas in Austin. Valued at $20–25 billion, it aims to consolidate the entire chip-making pipeline, design, fabrication, memory production, and advanced packaging in a single location. It should eliminate a majority of Tesla’s dependence on third-party chip fab companies.

The facility will manufacture two primary chip types: energy-efficient edge-inference processors optimized for Tesla’s Full Self-Driving (FSD) systems, Cybercab and Robotaxi, and Optimus humanoid robots, and high-power, radiation-hardened variants for SpaceX satellites and xAI’s orbital data centers.

Elon Musk launches TERAFAB: The $25B Tesla-SpaceXAI chip factory that will rewire the AI industry

The project’s audacious goal is to produce 1 terawatt (TW) of annual compute capacity, roughly 50 times current global AI chip output.

Production is expected to begin modestly and scale rapidly, addressing Musk’s warning that chip supply could soon become the biggest constraint on Tesla, SpaceX, and xAI growth. By vertically integrating manufacturing tailored to their exact needs, Terafab eliminates supply-chain bottlenecks and accelerates iteration for AI training, inference at the edge, and space-based computing.

Intel’s participation is strategically vital. The company will contribute expertise in advanced process technology, high-volume fabrication, and packaging to help Terafab achieve its aggressive targets. For Intel, the deal strengthens its foundry business and positions it as a critical U.S. player in the AI hardware race.

For Musk’s ecosystem, it secures domestic, purpose-built silicon at a time when global capacity meets only a fraction of projected demand for hundreds of millions of robots and orbital AI infrastructure.

This is the latest chapter in Intel-Tesla ties. In November 2025, Musk publicly stated at Tesla’s shareholder meeting that partnering with Intel on AI5 chips was “worth having discussions,” amid concerns about TSMC and Samsung capacity.

Exploratory talks followed, with Intel eyeing custom-AI opportunities. The Terafab integration transforms those conversations into concrete collaboration.

The Intel-Terafab alliance carries broader implications. It bolsters U.S. semiconductor sovereignty, drives innovation in cost- and power-efficient AI silicon, and supports Musk’s vision of exponential progress in autonomy, robotics, and space.

As AI compute demand surges, this partnership could reshape the industry, delivering the silicon backbone for a new era of intelligent machines on Earth and beyond.

Continue Reading