Connect with us

News

GM delays Chevy Bolt EV production halt to late January: Report

(Credit: General Motors)

Published

on

General Motors Co announced it would extend the production halt of the Chevy Bolt EV at the Orion Assembly plant in Michigan through January 28, 2022, as per Reuters

After a series of fires, the legacy automaker recalled thousands of Chevy Bolt EV vehicles. General Motors offered to replace the battery modules in its Chevy Bolt EVs. 

All Bolt EV vehicles were recalled in August due to the risk of their high-voltage battery packs catching fire. The National Highway Traffic Safety Administration is currently investigating Chevy Bolt EV battery fires. 

GM equipped the Chevy Bolt EV with batteries from LG Electronics. The South Korean battery developer agreed to reimburse the traditional automaker for $2 billion in estimated costs and expenses related to the Bolt EV recall. GM and LG’s partnership didn’t seem to be tarnished by the recall. 

GM and LG Energy solution are still building two battery plants together in the United States. GM and LG Energy have built a battery plant in Lordstown, Ohio, and plan to construct another one in Spring Hill, Tennesee. The battery factories cost $2.3 billion each and are expected to have a production capacity of about 35 gigawatt-hours. 

Advertisement

GM aims to open the Lordstown plant next year and the Tennessee battery factory by 2023. The battery plant in Tennessee will be using less-expensive battery chemistry than the one used in Lordstown. 

On Wednesday, GM announced a joint venture with POSCO Chemical to construct another factory in North America to process cathode active material for its Ultium batteries. The POSCO joint venture reveals GM’s continued determination to release the Ultium battery. 

“Our work with POSCO Chemical is a key part of our strategy to rapidly scale U.S. EV production and drive innovation in battery performance, quality and cost,” said Doug Parks, GM executive vice president, Global Product Development, Purchasing and Supply Chain. 

“We are building a sustainable and resilient North America-focused supply chain for EVs covering the entire ecosystem from raw materials to battery cell manufacturing and recycling,” he said.

Advertisement

The Teslarati team would appreciate hearing from you. If you have any tips, reach out to me at maria@teslarati.com or via Twitter @Writer_01001101.

Maria--aka "M"-- is an experienced writer and book editor. She's written about several topics including health, tech, and politics. As a book editor, she's worked with authors who write Sci-Fi, Romance, and Dark Fantasy. M loves hearing from TESLARATI readers. If you have any tips or article ideas, contact her at maria@teslarati.com or via X, @Writer_01001101.

Advertisement
Comments

Elon Musk

The Boring Company’s Prufrock-2 emerges after completing new Vegas Loop tunnel

The new tunnel measures 2.28 miles, making it the company’s longest single Vegas Loop tunnel to date.

Published

on

Credit: The Boring Company/X

The Boring Company announced that its Prufrock-2 tunnel boring machine (TBM) has completed another Vegas Loop tunnel in Las Vegas. The company shared the update in a post on social media platform X.

According to The Boring Company’s post, the new tunnel measures 2.28 miles, making it the company’s longest single Vegas Loop tunnel to date.

The new tunnel marks the fourth tunnel constructed near Westgate Las Vegas as the Vegas Loop network continues expanding across the city.

The Boring Company also noted that the new tunnel surpassed its previous internal record of 2.26 miles for a single Vegas Loop segment.

Advertisement

Construction of the tunnel involved moving roughly 68,000 cubic yards of dirt. The excavation process also used about 4.8 miles of continuous conveyor belt, powered by six motors totaling 825 horsepower.

The Boring Company’s Prufrock-series all-electric tunnel boring machines are designed to support the rapid expansion of company’s underground transportation projects, including the growing Vegas Loop network. Prufrock machines are designed for reusability, thanks in no small part to their capability to be deployed and retrieved easily through their “porposing” feature.

The Vegas Loop, specifically the Las Vegas Convention Center (LVCC) Loop segment, has already been used during major events. Most recently, the LVCC Loop supported the 2026 CONEXPO-CON/AGG construction trade show, which was held from March 3-7, 2026. 

As per The Boring Company, the LVCC Loop transported roughly 82,000 passengers across the convention center campus during the event’s duration. 

Advertisement

CONEXPO-CON/AGG is one of the largest construction trade shows in North America, drawing more than 140,000 construction professionals from 128 countries this year.

The LVCC Loop forms the initial segment of the broader Vegas Loop network, which remains under active development as The Boring Company continues building new tunnels throughout the city.

Continue Reading

News

Tesla gathers Cybercab fleet in Gigafactory Texas

Images and video of the Cybercab fleet were shared by longtime Giga Texas observer Joe Tegtmeyer in posts on social media platform X.

Published

on

Credit: Credit: @JoeTegtmeyer/X

Tesla appears to be assembling a growing number of Cybercabs at Gigafactory Texas as preparations continue for the vehicle’s mass production. Recent footage shared online has shown over 30 Cybercabs being transported by trucks or staged near testing areas at the facility.

The images and video were shared by longtime Giga Texas observer and drone operator Joe Tegtmeyer in posts on social media platform X.

Interestingly enough, Tegtmeyer noted that many of the Cybercabs being loaded onto transport trucks were still equipped with steering wheels. This suggests that the vehicles are likely testing units rather than the final driverless configuration expected for the company’s Robotaxi service.

The vehicles could potentially be headed to testing sites across the United States as Tesla prepares to expand its Robotaxi fleet.

Advertisement

Additional footage captured at Gigafactory Texas also showed the Cybercab’s side and rear camera washer system operating as vehicles were being loaded onto transport trucks.

The growing number of Cybercabs at Giga Texas comes amidst the company’s announcement that the first production Cybercab has been produced at the facility. Full Cybercab production is expected to begin in April.

The vehicle is expected to play a central role in Tesla’s Robotaxi ambitions as the company looks to expand autonomous ride-hailing operations beyond its early deployments using Model Y vehicles.

Tesla has also linked Cybercab production to its proposed Unboxed manufacturing process, which assembles large vehicle modules separately before integrating them. The approach is intended to reduce production costs and accelerate output.

Advertisement

Musk has also noted that the Cybercab’s ramp will likely begin slowly due to the number of new components and manufacturing steps involved. However, he stated that once the process matures, Cybercab production could scale quickly.

Continue Reading

Elon Musk

Elon Musk’s xAI, creator of Grok and Grokipedia, celebrates its third birthday

xAI Memphis highlighted several of its milestones over the years in its celebratory post. 

Published

on

Credit: xAI

Elon Musk’s artificial intelligence startup xAI has marked its third anniversary. The update was shared in a post from the xAI Memphis account on social media platform X.

xAI Memphis highlighted several of its milestones over the years in its celebratory post

As per xAI, it has built three massive data centers in the city, launched a coherent cluster of 330,000 GBs, created over 3,000 jobs, and paid over $30 million in taxes to local communities.

xAI’s Memphis operation has become a key part of the company’s infrastructure as the company works to train and deploy its Grok artificial intelligence models. Elon Musk has been quite optimistic about Grok’s potential, noting in the past that the large language model might have a shot at achieving artificial general intelligence (AGI). 

Advertisement

xAI’s Memphis’ crown jewel is its Colossus supercomputer cluster. The project was announced in 2024 and has since become the home of one of the world’s largest AI compute facilities. The first phase of Colossus reached its initial 100,000 GPU operational milestone in just 122 days, or just about four months.

Industry figures such as Nvidia CEO Jensen Huang have praised the facility, noting that projects of similar scale typically take two to four years to complete.

xAI has cited Memphis’ central location, skilled workforce, and industrial infrastructure as key reasons for selecting the city as the home of its AI training operations. The company has also emphasized plans to expand the site further as it scales compute capacity for Grok and future AI models.

Advertisement
Continue Reading