Connect with us
Rivian owner shares her experience with the recall Rivian owner shares her experience with the recall

News

Rivian R1T enters 2023 Pikes Peak Hill Climb — its first time in the competition

Published

on

A Rivian R1T will take on the famed climb to the 14,000-foot summit of Pikes Peak this year. This will be the automaker’s first time participating in one of the most intense hill climb events in the automotive world.

The Pikes Peak International Hill Club published this year’s competitors (via Rivian Forums), and the R1T is included on the list. Rivian’s Senior Performance Test Engineer, Gardner Nichols, will drive the all-electric pickup.

Nichols is an enthusiast of racing on all applications. In his two years at Rivian in his position, he has raced performance vehicles on the side, making him an ideal candidate for the Pikes Peak race.

Interestingly, Rivian R1T and R1S vehicles were spotted near Pikes Peak in mid-2021 but were there likely to perform various testing measures before initial deliveries began.

Pikes Peak is the highest summit of the southern Front Range of the Rocky Mountains, and the track measures 12.42 miles with over 156 turns and a change of elevation of almost 5,000 feet. As the cars climb higher, they get less oxygen from the thinner air, which in turn saps the performance of both vehicles and drivers.

Advertisement

The most powerful version of the R1T from 2022 boasts 835 horsepower and a maximum towing of up to 11,000 pounds. The all-electric pickup was designed for both on and off-road applications, making it ideal for tougher terrain. Adjustable air suspension, optional all-terrain tires, and an optional carbon-fiber underbody shield complement off-road performance.

Rivian R1T test drive video showcases electric pickup’s off-road capability

The 2022 Rivian R1T has an estimated range of 314 miles, but what is important in a hill climb event like Pikes Peak’s is performance.

The R1T packs a 0-60 MPH time of 3.3 seconds and completes a quarter-mile drag in 11.7 seconds at a top speed of 110.9 MPH.

Advertisement

EVs, such as the Tesla Model S Plaid, have succeeded in past climb events. In 2021, the Tesla Model S Plaid dominated with a time of 4:10.342 in the Exhibition Divison with a top speed of 140 MPH. Last year, a 2018 Model 3 driven by Daijiro Yoshihara finished second in the Exhibition Divison, with the Model S Plaid taking fourth after taking the crown the year before.

Disclosure: Johnna is a $TSLA shareholder and believes in Tesla’s mission. 

Your feedback is welcome. If you have any comments or concerns or see a typo, you can email me at johnna@teslarati.com. You can also reach me on Twitter at @JohnnaCrider1.

Teslarati is now on TikTok. Follow us for interactive news & more. Teslarati is now on TikTok. Follow us for interactive news & more. You can also follow Teslarati on LinkedInTwitter, Instagram, and Facebook.

Advertisement

Johnna Crider is a Baton Rouge writer covering Tesla, Elon Musk, EVs, and clean energy & supports Tesla's mission. Johnna also interviewed Elon Musk and you can listen here

Advertisement
Comments

Elon Musk

Tesla Terafab set for launch: Inside the $20B AI chip factory that will reshape the auto industry

Tesla set to launch “Terafab Project: A vertically integrated chip fabrication effort combining logic processing, memory, and advanced packaging.

Published

on

By

Tesla is making one of the boldest bets in its history. On March 14, Elon Musk posted on X that the “Terafab Project launches in 7 days,” pointing to March 21, 2026 as the start date for what he has described as a vertically integrated chip fabrication effort combining logic processing, memory, and advanced packaging.

Tesla first confirmed Terafab on its January 28, 2026 earnings call, where Musk told investors the company needs to build a chip fabrication facility to avoid a supply constraint projected to materialize within three to four years. But the seeds were planted even earlier. At Tesla’s annual general meeting last year, Musk warned that even in the best-case scenario for chip production from their suppliers, it still wouldn’t be enough, and declared that building a “gigantic chip fab” simply had to be done.

While there has been no official announcement on where Tesla plans to break ground on the massive Terafab, all signs point to the North Campus of Giga Texas in Austin.

Months of speculation has surrounded Tesla’s North Campus expansion at Giga Texas, where drone footage captured by observer Joe Tegtmeyer revealed massive construction site preparation just north of the existing factory on a scale that rivals the original Giga Texas footprint itself.

Advertisement

Samsung’s Tesla AI5/AI6 chip factory to start key equipment tests in March: report

The project is projected to produce 100–200 billion AI and memory chips annually, targeting 100,000 wafer starts per month, at an estimated cost of $20 billion. Tesla is targeting 2-nanometre process technology and anticipated to be the most advanced node currently in commercial production. Dubbed the Tesla AI5 chip, the chip will pack 40x–50x more compute performance and 9x more memory than AI4, and will be among the first products Terafab factory is set to produce. This highly optimized, and massively powerful inference chip is designed to make full self-driving (FSD) and Tesla’s Optimus robots faster, safer, and with full autonomy.

tesla-optimus-pilot-production-line

(Credit: Tesla)

This is where Terafab becomes a genuine game-changer. If Tesla successfully builds a 2nm chip fab at scale, it becomes one of only a handful of entities that’s capable of producing AI silicon in-house, with competitive implications that extend far beyond Tesla’s own vehicles, and potentially positioning Tesla as a chip supplier or licensor to other industries.

The next-gen Tesla AI chips will power advancements in Full Self-Driving software, the Cybercab Robotaxi program, and the Optimus humanoid robot line. Musk’s projections for Optimus require chip volumes that no existing external supplier can commit to on Tesla’s timeline.Competitors like Waymo and GM’s Cruise remain dependent on third-party silicon, leaving them exposed to the same supply chain vulnerabilities Tesla is now working to eliminate entirely.

The Terafab launch this week may not mean a factory opens its doors overnight, but it signals Tesla is serious about owning the entire AI stack, from software to silicon.

Advertisement
Continue Reading

Elon Musk

What is Digital Optimus? The new Tesla and xAI project explained

At its core, Digital Optimus operates through a dual-process architecture inspired by human cognition.

Published

on

Credit: Grok

Tesla and xAI announced their groundbreaking joint project, Digital Optimus, also nicknamed “Macrohard” in a humorous jab at Microsoft, earlier this week.

This software-based AI agent is designed to automate complex office workflows by observing and replicating human interactions with computers. As the first major outcome of Tesla’s $2 billion investment in xAI, it represents a powerful fusion of hardware efficiency and advanced reasoning.

Tesla announces massive investment into xAI

At its core, Digital Optimus operates through a dual-process architecture inspired by human cognition.

Advertisement

Tesla’s specialized AI acts as “System 1”—the fast, instinctive executor—processing the past five seconds of real-time computer screen video along with keyboard and mouse actions to perform immediate tasks.

Advertisement

xAI’s Grok model serves as “System 2,” the strategic “master conductor” or navigator, providing high-level reasoning, world understanding, and directional oversight, much like an advanced turn-by-turn navigation system.

When combined, the two can create a powerful AI-based assistant that can complete everything from accounting work to HR tasks.

Will Tesla join the fold? Predicting a triple merger with SpaceX and xAI

The system runs primarily on Tesla’s low-cost AI4 inference chip, minimizing expensive Nvidia resources from xAI for competitive, real-time performance.

Advertisement

Elon Musk described it as “the only real-time smart AI system” capable, in principle, of emulating the functions of entire companies, handling everything from accounting and HR to repetitive digital operations.

Timelines point to swift deployment. Announced just days ago, Musk expects Digital Optimus to be ready for user experience within about six months, targeting rollout around September 2026.

It will integrate into all AI4-equipped Tesla vehicles, enabling parked cars to handle office work during downtime. Millions of dedicated units are also planned for deployment at Supercharger stations, tapping into roughly 7 gigawatts of available power.

Digital Optimus directly supports Tesla’s broader autonomy strategy. It leverages the same end-to-end neural networks, computer vision, and real-time decision-making tech that power Full Self-Driving (FSD) software and the physical Optimus humanoid robot.

By repurposing idle vehicle compute and extending AI4 hardware beyond driving, the project scales Tesla’s autonomy ecosystem from roads to digital workspaces.

Advertisement

As a virtual counterpart to physical Optimus, it divides labor: software agents manage screen-based tasks while humanoid robots tackle physical ones, accelerating Tesla’s vision of general-purpose AI for productivity, Robotaxi fleets, and beyond.

In essence, Digital Optimus bridges Tesla’s vehicle and robotics autonomy with enterprise-scale AI, promising massive efficiency gains. No other company currently matches its real-time capabilities on such accessible hardware.

It really could be one of the most crucial developments Tesla and xAI begin to integrate, as it could revolutionize how people work and travel.

Advertisement
Continue Reading

News

Tesla adds awesome new driving feature to Model Y

Tesla is rolling out a new “Comfort Braking” feature with Software Update 2026.8. The feature is exclusive to the new Model Y, and is currently unavailable for any other vehicle in the Tesla lineup.

Published

on

Credit: Tesla

Tesla is adding an awesome new driving feature to Model Y vehicles, effective on Juniper-updated models considered model year 2026 or newer.

Tesla is rolling out a new “Comfort Braking” feature with Software Update 2026.8. The feature is exclusive to the new Model Y, and is currently unavailable for any other vehicle in the Tesla lineup.

Tesla writes in the release notes for the feature:

“Your Tesla now provides a smoother feel as you come to a complete stop during routine braking.”

Advertisement

Interestingly, we’re not too sure what catalyzed Tesla to try to improve braking smoothness, because it hasn’t seemed overly abrupt or rough from my perspective. Although the brake pedal in my Model Y is rarely used due to Regenerative Braking, it seems Tesla wanted to try to make the ride comfort even smoother for owners.

Advertisement

There is always room for improvement, though, and it seems that there is a way to make braking smoother for passengers while the vehicle is coming to a stop.

This is far from the first time Tesla has attempted to improve its ride comfort through Over-the-Air updates, as it has rolled out updates to improve regenerative braking performance, handling while using Full Self-Driving, improvements to Steer-by-Wire to Cybertruck, and even recent releases that have combatted Active Road Noise.

Tesla set to activate long-awaited Cybertruck feature

Tesla holds a unique ability to change the functionality of its vehicles through software updates, which have come in handy for many things, including remedying certain recalls and shipping new features to the Full Self-Driving suite.

Advertisement

Tesla seems to have the most seamless OTA processes, as many automakers have the ability to ship improvements through a simple software update.

We’re really excited to test the update, so when we get an opportunity to try out Comfort Braking when it makes it to our Model Y.

Continue Reading