Elon Musk
SpaceX and a new Trump order that could rewrite the next decade of launches
Elon Musk put a number on where he thinks SpaceX’s Starship program is headed by 2030, replying on X a day after President Trump signed a memo pushing the country toward 1,000 space launches and reentries a year.
The exchange started when Aaron Burnett, co-founder of propulsion startup Mach 33, posted that “1,000 launches/reentries is the goal,” quoting White House science adviser Michael Kratsios on the newly signed National Space Transportation Policy. Burnett noted that the FAA’s own bull-case forecast reached only 385 annual launches by 2030, while his firm’s conservative model already put SpaceX alone near 940. Musk responded, “We’re aiming to reach 30+ Starship launches/day in 2030, which is ~10k annualized. Still tiny numbers compared to airplane flights!”
We’re aiming to reach 30+ Starship launches/day in 2030, which is ~10k annualized.
Still tiny numbers compared to airplane flights!
— Elon Musk (@elonmusk) August 21, 2026
That figure is specific to Starship, the rocket SpaceX is still developing for orbital and lunar missions, not the Falcon 9 fleet that carries most of the company’s current launch volume. Starship has flown twice this year, a slower pace than the four and five flights SpaceX managed in 2024 and 2025. Getting from two flights a year to 30 a day is the scale of jump the new federal policy is meant to clear regulatory room for.
Trump’s memo, signed Thursday, directs agencies to identify new launch and reentry sites on federal land, including a new reentry site within 90 days, and to speed up the permitting and environmental reviews that have long slowed cadence growth. It also sets a goal of returning American astronauts to the moon by 2028 and placing initial lunar base elements by 2030, tying the launch buildout directly to NASA’s Artemis program.
SpaceX has already been pushing the FAA toward higher numbers on its own. The agency approved up to 44 annual Starship launches from Kennedy Space Center in February, on top of a 2024 review that raised the cap at Starbase in Texas to 25 a year. Those approvals cover a fraction of the 10,000 annual flights Musk is now describing, which shows how far current permitting still sits from the administration’s stated target.
The near-term test of all this is more modest. SpaceX cleared a full-duration, six-engine static fire on its next Starship vehicle this week, the last major hardware checkpoint before Flight 14, which is targeting no earlier than August 28 and is expected to attempt the vehicle’s first full orbital mission. Musk said last week that a tower catch of the upper stage is still probably months away, a reminder that the immediate roadmap remains far more incremental than the daily launch numbers he just posted.
Elon Musk
Tesla gears up Cybercab with Starlink for public debut, but with notable changes
Tesla is gearing up Cybercab, its all-electric and fully autonomous ride-hailing vehicle, for a very public debut as it plans to start customer deliveries in December. However, the units that rolled out of Gigafactory Texas this morning seem to differ from what we have seen previously.
Aerial images captured by drone photographer Joe Tegtmeyer at Giga Texas on November 18 reveal a noticeable update to the appearance of Tesla’s Cybercabs equipped with Starlink. Rows of gold production vehicles sit in the outbound lot, each carrying a flush-mounted Starlink V5 terminal on the rear hatch that looks more refined than the version first shown months earlier.
When Tesla first unveiled the integration in July and displayed a physical example in August, the Starlink hardware appeared as a relatively distinct rectangular panel on the hatch. Later September footage of large numbers of Cybercabs leaving the factory still showed a lighter, more obvious rectangular cover that roughly matched the vehicle’s gold paint:

Images via Joe Tegtmeyer
The newest batch stands out for how cleanly the cover blends into the roof’s character lines. Observers and replies to Tegtmeyer’s post describe the result as tighter and more intentional, sitting flush and following the body contours rather than reading as an added panel.
All of the Cybercabs in the latest images also wear prominent “Cybercab” logos on the doors and rear hatch, confirming these are finished production units rather than early prototypes. They are staged near the factory building, end-of-line areas, and covered transport trailers, with some already lined up for shipment.
The scale and consistency of the installation point to factory tooling rather than retrofit work.
A secondary detail noted in related sightings is a darker tone to the Starlink cover compared with earlier lighter panels. Tegtmeyer himself left open whether the darker finish is deliberate. There are a variety of explanations for it: perhaps for thermal performance, signal characteristics, or simple visual identification—or simply a batch variation still being refined.
Either way, the overall effect is a more integrated, production-ready appearance. For a Robotaxi that relies on Starlink for fleet connectivity, passenger services, and backup data links in areas with weak cellular coverage, the cleaner hatch design is more than cosmetic.
It signals that Tesla is polishing the final visual and hardware details as Cybercab volumes continue to climb at Giga Texas ahead of broader Robotaxi deployment. The vehicles now look to be built with Starlink instead of it being added afterward.
Elon Musk
Tesla’s Powercore could change how data centers get power
Tesla unveiled Powercore, a solid-state transformer that could ease one of the grid’s worst bottlenecks.
Tesla has unveiled Powercore, a solid-state medium voltage transformer that also handles the jobs of an inverter and a circuit breaker in a single unit. “Solid state medium voltage transformer, inverter and breaker – reliable, safe and secure,” the company’s Tesla Megapack account posted on X Tuesday, adding that the product is “Made in America” and will be “Operating 2027.” Elon Musk followed with his own post: “Advanced solid state transformers at scale from Tesla.”
Tesla rates Powercore at 7.4 MW, or 9 MVA, of continuous output at 34.5 kV AC, with grid-forming support for 10 MVA of peak power. Specs shared by Sawyer Merritt list a peak efficiency of 98.86 percent, a DC range of 800 to 2,000 volts and a built-in solid-state breaker that clears faults in about 100 microseconds. Tesla has not announced pricing, a factory location or a first customer.
The product fills a gap Tesla left open last year. When it introduced Megapack 3 and Megablock in September 2025, Tesla said it would build its own transformers, but shared almost nothing about them. Megablock groups four Megapack 3 units with a transformer and switchgear into a single medium voltage block, as Teslarati reported. Powercore appears to be that missing piece.
A typical battery or solar project today uses low voltage inverters to turn DC into AC, then a large oil-filled transformer to step that power up to grid voltage. A solid-state unit handles both steps with power electronics, which means less equipment, a smaller footprint and no flammable oil. Grid-forming capability lets it actively help hold voltage and frequency steady rather than simply following the grid.
Introducing Powercore Solid state medium voltage transformer, inverter and breaker – reliable, safe and secure 7.4 MW/9 MVA continuously at 34.5 kVac w/ grid-forming support for 10MVA of peak power Made in America. Operating 2027 https://t.co/sHxqnpWJrf — Tesla Megapack (@Tesla_Megapack) November 17, 2026
Timing is a big part of the pitch. Lead times for conventional transformers have stretched into years as AI data centers and renewable projects crowd utility interconnection queues. Tesla energy executive Max de Zegher pointed to the problem in a post Musk shared, noting that “transformers have barely changed since the 1890s: copper coils in a tank of oil,” while batteries, solar and compute all run on DC. Powercore, he wrote, delivers “one conversion and about half the losses.” Tesla has also said its Megapack supply for 2027 is nearly sold out.
Tesla deployed 13.7 GWh of energy storage in the third quarter, its second best quarter on record. On Tuesday, the company also said customer solar systems deployed by Tesla Energy now generate more than twice the electricity its global operations consume each year.
Cybertruck
Tesla tuner pleading to save Cybertruck also wants to build CyberSUV
Tesla tuner Unplugged Performance, the company pleading to save the Cybertruck, detailed in a new phase of its plan to rescue manufacturing lines from Gigafactory Texas that it would also build a three-row CyberSUV.
UP has already navigated a lot of the difficult thought work, including how it will woo Tesla to turn over the all-electric pickup’s production lines at no cost or risk to them. Tesla has signaled it will wind down Cybertruck output at Gigafactory Texas sometime around the middle of next year.
Unplugged, the Hawthorne-based aftermarket specialist that has tuned Teslas since 2013, first floated an open offer on November 10 and followed with a more specific “Phase 3” outline on November 15. Under the structure, outside investors would fund the new company.
82% of respondents want a three-row CyberSUV. The line to build it is about to be dismantled. Our proposal keeps it alive at no added cost to Tesla. Tesla keeps the IP, signs its first FSD license, and earns on every vehicle.
👇 https://t.co/y9y33EuLPr— UP (@UnpluggedTesla) November 15, 2026
The line would leave Giga Texas on Tesla’s schedule, supplier contracts would transfer, and Unplugged would hire its own staff, drawing from interested Tesla alumni, without pulling current Tesla employees or engineering resources.
Tesla would retain intellectual-property ownership, final say on specifications and brand, a quality veto, and an option to reclaim the line. In return, Tesla would collect a license fee on every vehicle plus margin on parts it continues to supply, Full Self-Driving and Robotaxi revenue, and a no-cost equity stake in the new entity.
If Unplugged cannot meet demand or capital targets Tesla sets, it would withdraw.
UP looked at the overwhelming demand for a full-size SUV, something that Tesla has had a lot of demand for but has not developed internally. A poll put out by the tuner that surveyed 892 responses showed 82 percent of voters favored a CyberSUV. There is a substantially deeper market for three-row SUVs priced above $80,000 compared to pickups.
Not to mention, the new body tooling plus limiting other changes from the Cybertruck line would enable the company to use the existing platform to produce an all-terrain family vehicle while continuing to produce Cybertruck builds at a modest incremental cost.
Tesla has already shown interest in a CyberSUV, as it hid Cybertruck-inspired clay models of what appeared to be a full-size SUV in a video last year:
The proposal from UP also contemplates multiple configurations that would enable owners to utilize a full-fledged Robotaxi in the form of a CyberSUV, aiming to build one with conventional controls for private buyers while a no-wheel/pedal version would be available for the Robotaxi fleet.
Tesla has made it clear that its manufacturing space and cell capacity is set aside for Cybercab, but UP already has soft commitments from a conglomeration of investors, but it all hinges on Tesla’s willingness to engage.