Tesla battery supplier Panasonic reported its earnings this morning, stating it took a 39 percent drop in first-quarter earnings due to COVID-19 lockdowns in China and rising materials costs.
Panasonic said its operating profit for the three-month span ending on June 30 was 63.7 billion yen, or $470.77 million. This missed a consensus estimate of 73.3 billion yen, or $544.74 million.
Chief Financial Officer Hirokazu Umeda admitted the numbers “look weak.” However, Panasonic is not shying away from its full-year operating profit projections, which stand at 360 billion yen, or $2.66 billion. “We judged that it is not necessary to make a change to our outlook,” Umeda said, according to Reuters.
Portions of China were locked down for two months due to an increase in COVID-19 cases. Panasonic was not the only company affected by the closures, which ultimately affected the company’s performance. Tesla was also forced to shut down its vehicle manufacturing facility in Shanghai for three weeks, which contributed to the company’s first quarter-over-quarter reduction in automotive deliveries. However, Tesla reported an extremely strong financial performance during the quarter.
While the COVID shutdowns hindered Panasonic’s production, Russia’s invasion of Ukraine affected battery material availability. The situation has largely affected the EV supply chain, which has caused raw material prices to skyrocket, thus increasing prices of electric cars.
Mining experts called on industry leaders like Tesla CEO Elon Musk and Ford CEO Jim Farley to voice their support for local mining, which would alleviate soaring material costs. “I would encourage the big names: Musk, Farley, Barra, to start demanding Nickel sourcing in North America,” Trent Mell, CEO of Electra Battery Materials, said. “There is no immediate North American solution to growing nickel demand, but we anticipate that the construction of processing capacity on the continent will act as a catalyst to bring more primary nickel, in the form of mining operations, online in coming years so that North America can become increasingly self-reliant on domestically sourced raw materials. There are ample, good-quality nickel projects in North America.”
Panasonic recently announced plans to open a cell manufacturing facility in Kansas, which will help supplement its supply deal with Tesla for its 4680 batteries. Production of the Tesla cell will begin in Japan sometime next year.
Panasonic selects Kansas as site of its North American 4680 plant: report
Panasonic wants to increase battery production by three to four times by 2029, with most of the growth coming in North America.
I’d love to hear from you! If you have any comments, concerns, or questions, please email me at joey@teslarati.com. You can also reach me on Twitter @KlenderJoey, or if you have news tips, you can email us at tips@teslarati.com.
Tesla Cybercab stands to gain from new rules that the Trump Administration is aiming to enforce on autonomous vehicles. On Thursday, NHTSA, under the Trump Administration’s U.S. Department of Transportation, commenced rulemaking on the Federal Motor Vehicle Safety Standards (FMVSS).
This effort aims to eliminate the mandate for manual brake pedals in vehicles that are designed to be driven exclusively by automated driving systems. This would impact the Tesla Cybercab, which the company has stated would operate without a steering wheel or pedals.
Tesla Cybercab launch is imminent after latest sighting at Giga Texas
The Trump Administration is looking to revise FMVSS No. 135, which requires standard braking systems on light-duty vehicles.
Currently, the regulation requires light-duty cars to use traditional manual braking systems that allow operators to slow the vehicle. With the advent of self-driving in the U.S., these regulations need updating, and these are the changes that could come to FMVSS No. 135:
- Removes requirements for hand- or foot-operated brake controls for vehicles designed never to be operated by a human. Existing rules still apply to AVs that retain manual controls.
- All subject vehicles must still meet the same stopping distance performance criteria via alternative testing procedures.
- While this update ensures AVs can physically stop when commanded, NHTSA is separately developing safety performance requirements for AVs in real-world driving scenarios.
- NHTSA will continue to use its broad defect enforcement authority to investigate unsafe ADS behavior and oversee recalls.
As autonomy becomes a greater part of passenger travel, these types of rule adjustments will be more than reasonable. It will give manufacturers the ability to self-certify their vehicles and avoid any red tape that could ultimately delay the deployment of these vehicles.
Administrators are also incredibly excited about the opportunity to play a role in the advancement of self-driving vehicles.
“We are at the cusp of the greatest technological revolution in vehicle technology since the innovation of the Model T,” NHTSA Administrator Jonathan Morrison said. “If we want America to lead the way, we have to reimagine our regulatory framework. That’s why under Secretary Sean Duffy’s AV Framework, NHTSA is tearing down pointless barriers to innovative designs while strengthening the fundamental safety requirements that matter and holding AV developers accountable for safe performance.”
The Cybercab entered mass production at Gigafactory Texas in April. Tesla ultimately plans to push the vehicle into its Robotaxi fleet, potentially when frameworks like these are established.
Tesla plans to boost production at its Gigafactory Berlin plant in Germany following a sharp rebound in sales and demand in Europe after a softer 2025.
The plans put Tesla in a better position to compete with strengthening companies in Europe and potentially other markets; demand indicators show Tesla is much better off than in 2025.
Last year was a tough year for Tesla in terms of overall demand in Europe. The company produced over 200,000 vehicles at the German plant last year, a soft figure compared to the 375,000 vehicles Tesla lists as its current capacity at the factory.
🚨 Tesla said this morning it will ramp up production at Gigafactory Berlin to a volume of 7,500 vehicles per week.
This is a 20 percent boost in production. Tesla will hire 1,000 new employees to help with the increase.$TSLA pic.twitter.com/kravKfRO5n
— TESLARATI (@Teslarati) June 25, 2026
Tesla’s overall European sales dropped significantly last year due to a variety of factors. However, sales are rebounding, and demand is strong once again, and only getting stronger. Tesla is now planning to bump production of Model Y vehicles at Giga Berlin upward by about 20 percent. It will also bring 1,000 new jobs to the plant.
Tesla confirmed the details of its planned production expansion in Germany this morning. It is a strategy to keep up with strengthening demand.
In Q1, Tesla saw a record 61,000 vehicles produced at Giga Berlin. European registrations rebounded sharply, with Model Y seeing 117 percent increases in March 2026 compared to last year. Germany alone saw stark increases, with a quadrupling in registrations to 9,252 units.
This trend continued in other key European markets, including France, Denmark and Sweden. Tesla registrations were up over 46 percent in some of these markets, and Model Y continued its trend as a top BEV in the market.
Demand has been recovering strongly in 2026, giving Tesla a reason to expand production efforts at the factory. These increases signal management’s confidence in sustained or growing European pull for Berlin-built vehicles.
Tesla is being sued by the family of the woman who was killed in a Texas crash involving a Model 3. The driver, who is also being sued, claimed the vehicle was operating on Autopilot mode, but Tesla executives have come out challenging that claim, stating that the driver of the vehicle overrode the system.
The lawsuit was filed by 76-year-old Martha Avila’s daughter and her husband, who allege a “design defect” involving a Tesla and a failure to warn. The suit alleges negligence against Tesla and the driver, Michael Butler.
Butler “stated he was operating with an automated driving assistance system engaged at the time of the crash,” the Harris County Sheriff’s Office said in a statement. He showed no signs of intoxication and was cooperative, the Sheriff’s Office said, according to NBC News.
Just after reports of the crash and numerous headlines that immediately blamed Tesla’s Autopilot suite, both Tesla CEO Elon Musk and Head of AI Ashok Elluswamy challenged that. Musk said the crash made “no sense” given that Tesla Autopilot and Full Self-Driving do not travel at the speeds the door cameras captured the car traveling at, which Tesla says was 73 MPH.
Tesla finally clarifies fatal Texas crash, confirms driver manually overrode acceleration
Elluswamy also revealed that Tesla data showed Butler overrode the system by pressing the accelerator to 100%, and that the pedal was compressed fully even after the car had crashed. Tesla has not released this data to the public, likely because it is communicating with agencies like the NHTSA on an investigation.
The suit uses a Washington Post analysis of government data that “identified at least 17 fatal incidents linked to Tesla Autopilot.”
This is far from the first time an accident has been blamed on Autopilot. A fatal crash in Texas was blamed on Autopilot several years ago, but when Tesla released data to the NTSB, which was investigating the crash, Autopilot was not available where the crash occurred, and Autosteer was never enabled, meaning the car was manually controlled at the time of the accident.
“Application of the accelerator pedal was found to be as high as 98.8 percent,” the NTSB said in their findings. The highest recorded speed in the five seconds leading up to the impact was 67 miles per hour. The area where the crash occurred is residential, and Texas State laws… pic.twitter.com/XGD97NHVZ2
— TESLARATI (@Teslarati) March 18, 2026
More information on the accident will be released as Tesla works with agencies to find the cause of the crash. From personal experience, it is hard to imagine Tesla Autopilot or FSD operating in this manner. It drives sometimes too cautiously in residential areas in parking lots, at least in my experience. Speeding happens, but at this rate in this type of area, it is hard to believe.
We look forward to more details being released with time.
Tesla Cybercab stands to gain from new Trump autonomy rules
Tesla plans production boost at Giga Berlin following rebound in Europe
