News
Tesla Cybertruck UI patent hints at 610-mile range, eye tracking mirror adjustments
During its unveiling, the Tesla Cybertruck’s tri-motor configuration was announced with some very impressive specs, including a 0-60 mph time of 2.9 seconds, a towing capacity of 14,000 pounds, and a top speed of 130 mph. But beyond this, the tri-motor Cybertruck was also announced with 500+ miles of EPA estimated range.
A 500+-mile range is extremely impressive considering the Cybertruck’s massive size and likely weight. With Elon Musk stating that vehicles like the Tesla Semi would be released with a range that’s closer to 600 miles per charge, speculations were abounding that the tri-motor Cybertruck may have a range that’s in the same ballpark as the Class 8 truck.

A recently-published patent on the Cybertruck’s user interface has now provided further hints that the all-electric pickup’s actual range may really be far above its initial “500+-mile” estimate. As could be seen in 21 out of the UI patent’s 33 drawings, the Cybertruck’s range was listed as 610 miles. This was quite interesting considering that the patent’s illustrations appeared to be screenshots from the Cybertruck’s upcoming UI.
It should be noted that patent illustrations are not a direct indication of the Cybertruck’s final specifications, and the 610-mile number may be a placeholder. Nevertheless, the possibility of a 610-mile tri-motor Cybertruck is exciting, as it would effectively establish Tesla’s battery lead in the electric pickup sector. Even formidable competitors like the Ford F-150 Lightning and the GMC Hummer EV—arguably the best electric pickups that legacy auto has unveiled to date—top out at 300 and 400 miles of range, respectively.

Tesla’s Cybertruck UI patent featured several other interesting references to the all-electric pickup’s novel features. These include the use of eye tracking technology to adjust the vehicle’s mirrors, as well as an air conditioning system that tracks passengers for optimum climate control. Several images from the patent also hint at the Cybertruck pulling a 20,000-pound trailer, as well as 20 inches of suspension travel.
The Tesla Cybertruck may be gracing US roads earlier than expected, with Gigafactory Texas accelerating its construction over the past months. Elon Musk has also mentioned that the first Cybertrucks may actually be completed later this year, with volume production of the steel pickup picking up pace next year.
Do you have anything to share with the Teslarati Team? We’d love to hear from you, email us at tips@teslarati.com or reach out to me at maria@teslarati.com.
Elon Musk
Elon Musk reveals how SpaceX is always on board Air Force One
Musk confirmed Tuesday that Starlink internet is live and kicking on Air Force One. Responding with a simple “Yup!” to a post showing him and Nvidia CEO Jensen Huang aboard the presidential jet en route to Beijing with President Trump, Musk proved the point: America’s most important aircraft now has seamless, high-speed satellite connectivity—even over the middle of the Pacific.
Air Force One, the official call sign for a U.S. Air Force aircraft carrying the President, now runs on SpaceX Starlink, CEO Elon Musk revealed.
Musk confirmed Tuesday that Starlink internet is live and kicking on Air Force One. Responding with a simple “Yup!” to a post showing him and Nvidia CEO Jensen Huang aboard the presidential jet en route to Beijing with President Trump, Musk proved the point: America’s most important aircraft now has seamless, high-speed satellite connectivity—even over the middle of the Pacific.
Yup!
— Elon Musk (@elonmusk) May 13, 2026
The timing couldn’t be more symbolic. With trillion-dollar CEOs and the President sharing the cabin, Starlink wasn’t just a nice-to-have—it was mission-critical. No more spotty signals or dropped calls. Instead, real-time video conferences, secure data transfers, and global coordination at Mach speed.
Starlink’s aviation push has already transformed commercial and private flying. Dozens of major airlines have signed on or begun rollouts.
Hawaiian Airlines, United Airlines, Qatar Airways, Air France, SAS, WestJet, airBaltic, and Emirates (now equipping its Boeing 777 and A380 fleets) offer Starlink Wi-Fi to passengers. Lufthansa plans to follow in late 2026.
On private jets, the upgrade is even hotter: owners and charter companies report skyrocketing demand because Starlink turns cabins into flying boardrooms.
Starlink gets its latest airline adoptee for stable and reliable internet access
The advantages are massive. Traditional in-flight Wi-Fi relied on slow, high-latency geostationary satellites or ground-based systems that cut out over oceans and remote areas. Starlink’s low-Earth-orbit constellation delivers blazing speeds—often exceeding 200 Mbps download with latency as low as 25-60 milliseconds—gate-to-gate, from takeoff to landing.
Passengers stream 4K video, join Zoom calls, or work in the cloud without buffering. Pilots get real-time weather, NOTAM updates, and live ATC data. Even private-jet travelers get the benefits, as it means productivity that rivals the office.
On Air Force One, those benefits become strategic superpowers. The presidential aircraft demands unbreakable communications for national security, diplomacy, and crisis response. Starlink provides global coverage with no dead zones, offering redundancy against traditional systems that could fail in contested airspace or during long-haul flights.
It enables the President and staff to maintain secure links with the Pentagon, allies, or business leaders anywhere on Earth. During the Beijing trip, it likely facilitated direct coordination on trade, tech, and AI—proving the system’s reliability for the highest-stakes missions.
Critics once dismissed Starlink as a rich-person toy or military experiment. Now, it’s the backbone of commercial fleets, private aviation, and the world’s most visible symbol of American power, and it is providing stable internet to travelers.
With over 2,000 commercial aircraft committed and private-jet installations booming, Starlink is rewriting the rules of connected flight, and it seems like each week, a new airline is choosing to use it for on-flight connectivity.
For Air Force One, it’s more than faster Wi-Fi. It’s uninterrupted command-and-control in an increasingly connected world—ensuring the President never has to go dark at altitude. Elon Musk just made sure of it.
Elon Musk
SpaceX unveils sweeping Starship V3 upgrades ahead of May 19 launch
SpaceX has released a detailed list of changes for Starship Version 3, the next iteration of its fully reusable super-heavy-lift vehicle. Scheduled for its maiden flight as early as May 19 from Starbase in Texas, Starship V3 incorporates dozens of redesigns across the Super Heavy booster, Starship upper stage, Raptor 3 engines, and Launch Pad 2.
SpaceX has unveiled sweeping upgrades to its Starship v3 rocket ahead of the upcoming May 19 launch.
SpaceX has released a detailed list of changes for Starship Version 3, the next iteration of its fully reusable super-heavy-lift vehicle. Scheduled for its maiden flight as early as May 19 from Starbase in Texas, Starship V3 incorporates dozens of redesigns across the Super Heavy booster, Starship upper stage, Raptor 3 engines, and Launch Pad 2.
Elon Musk reveals date of SpaceX Starship v3’s maiden voyage
The updates focus on simplification, mass reduction, reliability, and enabling core capabilities like rapid reusability, in-orbit refueling, Starlink deployment, and crewed missions to the Moon and Mars.
Collectively, these modifications mark a major step-change. By reducing dry mass, improving thermal protection, and integrating systems for orbital operations, Starship V3 aims to transition from test vehicle to operational infrastructure.
Here is an explicit, broken-down list of the key changes, first starting with the changes to Super Heavy V3:
- Grid Fin Redesign: Reduced from four fins to three. Each fin is now 50% larger and stronger, repositioned for better catching and lifting performance. Fins are lowered on the booster to reduce heat exposure during hot staging, with hardware moved inside the fuel tank for protection.
- Integrated Hot Staging: Eliminates the old disposable interstage shield. The booster dome is now directly exposed to upper-stage engine ignition, protected by tank pressure and steel shielding. Interstage actuators retract after separation.
- New Fuel Transfer System: Massive redesign of the fuel transfer tube—roughly the size of a Falcon 9 first stage—enables simultaneous startup of all 33 Raptors for faster, more reliable flip maneuvers.
- Engine Bay / Thermal Protection: Engine shrouds removed entirely; new shielding added between engines. Propulsion and avionics are more tightly integrated. CO₂ fire suppression system deleted for a simpler, lighter aft section.
- Propellant Loading Improvements: Switched from one quick disconnect to two separate systems for added redundancy and reduced pad complexity.
Next, we have the changes to Starship V3:
- Completely Redesigned Propulsion System: Clean-sheet redesign supports new Raptor startup, larger propellant volume, and an improved reaction control system while reducing trapped or leaked propellant risk.
- Aft Section Simplification: Fluid and electrical systems rerouted; engine shrouds and large aft cavity deleted.
- Flap Actuation Upgrade: Changed from two actuators per flap to one actuator with three motors for better redundancy, mass efficiency, and lower cost.
- Faster Starlink Deployment: Upgraded PEZ dispenser enables quicker satellite release.
- Long-Duration Spaceflight Capability: New systems for long orbital coasts, orbital refueling, cryogenic fluid management, vacuum-insulated header tanks, and high-voltage cryogenic recirculation.
- Ship-to-Ship Docking + Refueling: Four docking drogues and dedicated propellant transfer connections added to support in-space refueling architecture.
- Avionics Upgrades: 60 custom avionics units with integrated batteries, inverters, and high-voltage systems (9 MW peak power). New multi-sensor navigation for precision autonomous flight. RF sensors measure propellant in microgravity. ~50 onboard camera views and 480 Mbps Starlink connectivity for low-latency communications.
Next are the changes to the Raptor 3 Engine:
- Higher Thrust: Sea-level Raptors increased from 230 tf (507k lbf) to 250 tf (551k lbf); vacuum Raptors from 258 tf (568k lbf) to 275 tf (606k lbf).
- Lower Mass: Sea-level engine mass reduced from 1630 kg to 1525 kg.
- Simpler Design: Sensors and controllers integrated into the engine body; shrouds eliminated; new ignition system for all variants. Results in ~1 ton of vehicle-level weight savings per engine.
Finally, the upgrades to Launch Pad 2 are as follows:
- Faster propellant loading via larger farm and more pumps.
- Chopstick improvements: shorter arms, electromechanical actuators (replacing hydraulic) for reliability.
- Stronger quick-disconnect arm that swings farther away.
- Redesigned launch mount for better load handling and protection.
- New bidirectional flame diverter eliminates post-launch ablation and refurbishment.
- Hardened propellant systems with separated methane/oxygen lines and protected valves/filters.
SpaceX states these elements “are designed to enable a step-change in Starship capabilities and aim to unlock the vehicle’s core functions, including full and rapid reuse, in-space propellant transfer, deployment of Starlink satellites and orbital data centers, and the ability to send people and cargo to the Moon and Mars.”
With these upgrades, Starship V3 is poised for an epic test flight that could accelerate humanity’s multiplanetary future. The rapid pace of iteration underscores SpaceX’s relentless drive toward making life multiplanetary. Launch watchers are in for a spectacular show.
News
Tesla patent aims to make massive change to common automotive part
Detailed in US 2026/0110320 A1 and published on April 23, the patent re-engineers the humble trim clip—the small plastic fastener that secures interior panels to the vehicle’s body structure. Traditional clips are single-piece plastic parts designed for one-time installation.
A new Tesla patent aims to fix a common automotive item for a more peaceful ride, revolutionizing its design to remove vibrations and noise during normal operation.
Detailed in US 2026/0110320 A1 and published on April 23, the patent re-engineers the humble trim clip—the small plastic fastener that secures interior panels to the vehicle’s body structure. Traditional clips are single-piece plastic parts designed for one-time installation.
Over time, they loosen, rattle, and transmit road noise, suspension vibrations, and minor panel buzz directly into the passenger compartment. Tesla’s new design turns that ordinary item into a reusable, two-material vibration-damping system built for long-term silence.
A TESLA PATENT DETAILS THE TWO MATERIALS AND FOUR FORCES THAT MAKE A TRIM CLIP REUSABLE
Tesla published a single patent application on April 23 that describes how to make an interior trim clip reusable across multiple service cycles.
US 2026/0110320 A1 was filed in October 2024… https://t.co/02yOUKkar2 pic.twitter.com/pEJUCw46yc
— SETI Park (@seti_park) May 3, 2026
The clip consists of four components drawn from just two material families. The pin and grommet are molded from rigid glass-fiber-reinforced nylon, giving them the strength needed to hold panels firmly in place.
Not a Tesla App reported on the patent.
A soft thermoplastic elastomer (TPE) is then overmolded onto the assembly in a distinctive mushroom shape that flares outward beyond the pin shaft. This soft layer does the heavy lifting for comfort: it spreads mechanical loads over a wider area and actively damps oscillations before they can reach the interior trim.
The result is a measurable reduction in noise, vibration, and harshness (NVH)—the very factors that separate a merely quiet electric vehicle from one that feels genuinely serene.
Engineers used finite-element analysis to dial in four precise forces that make the system both secure and serviceable. It takes 31 newtons to insert the grommet into the body panel and 243 newtons to pull it back out, ensuring it stays anchored during normal driving. The pin, however, slides in with only 7 newtons and releases at 152 newtons, the patent says.
Because the grommet grips the sheet metal far more tightly than the pin grips the grommet, technicians can pop the trim panel off, service wiring or components behind it, and snap everything back together without disturbing the grommet or degrading the soft overmold.
The clip survives repeated service cycles with no measurable loss of damping performance.
For drivers, the payoff is a noticeably more peaceful ride. Road rumble, panel flutter, and high-frequency buzz that often sneak into luxury cabins are absorbed at the source rather than conducted through rigid plastic. Over the life of the vehicle, the reusable design also prevents the gradual loosening that causes rattles in conventional clips. Fewer replacements mean less cabin noise from degraded parts and lower long-term maintenance costs.
Tesla’s patent shows how even the smallest hardware decisions affect the overall driving experience. By giving a mundane trim clip two distinct personalities—rigid where strength is needed, soft where silence matters—the company is quietly engineering away one more source of distraction.
If the design reaches production, future Tesla owners could enjoy an even calmer, more refined interior without ever noticing the clever little clips holding it all together.