The Governor of Nuevo León announced Tesla Gigafactory Mexico’s groundbreaking is expected to take place in March. He also mentioned some issues and concerns brought up by people managing Giga Mexico’s permit papers.
Governor Samuel García Sepúlveda shared the Tesla Mexico news during his visit to a community center in Monterrey, reported Milenio. Initially, Tesla was expected to lay the first stone for Giga Mexico this month, but it was pushed back to March.
The Governor of Nuevo León’s announcement does not solidify Giga Mexico’s groundbreaking schedule. In fact, he also revealed that a few departments issuing permits for Tesla Giga Mexico’s construction have requested for an extension.
“Today I spoke with… I’m going to say, with the management in Mexico. There is already the electrical issue, there is the water issue, there is the environment, they had requested an extension of the environmental permit because it seems that the plant is going to be bigger than they thought.
“I told him that since the State is already building the roads and accesses, I asked them for Tesla to come by March at the latest to make a groundbreaking announcement, and they didn’t say no, so I hope that very soon, in Less than a month, Tesla comes, now the company is going to do the project,” said Governor García Sepúlveda.
The government of Nuevo León has already started construction on the roads and other areas surrounding the Giga Mexico site–known as the Tesla District. It is currently working on expanding the Monterrey-Saltillio Highway in preparation for a nearshoring spike.
Some concerns about Tesla Giga Mexico and its arrival in that area have been mentioned. Among the concerns is nearshoring and its impact on small companies in Nuevo León. Based on Governor Governor García Sepúlveda’s comments, some management departments in Mexico have mentioned electrical issues, water issues, and concerns about Tesla’s environmental impact. From the wording, it seems some locals have similar concerns as those in Grüheide near Tesla Giga Berlin.
If you have any tips, contact me at maria@teslarati.com or via X @Writer_01001101.
Elon Musk
Tesla launches 200mph Model S “Gold” Signature in invite-only purchase
Tesla’s final 350-unit Signature Edition closes the book on two cars that changed everything.
Tesla has announced a super limited Signature Edition run of 250 Model S Plaid and 100 Model X Plaid units as an invite only purchase in a bid to give its original flagship vehicles a proper send-off.
When the Model S first launched in 2012, the first 1,000 units sold were “Signature” editions that required a $40,000 deposit and cost nearly $100,000 each. Those early buyers were Tesla’s first real believers. This new Signature Edition deliberately echoes that moment, bookending a 14-year run with numbered collector hardware.
Both models are finished in an exclusive Garnet Red paint not available on any current Tesla production vehicle, with gold Tesla T badges up front, a gold Plaid badge and Signature badge at the rear, and a white Alcantara interior featuring gold Plaid seat badges, gold piping, Signature-marked door sills, and a numbered dash plate. The Model S adds carbon ceramic brakes with gold calipers. Every unit ships with Tesla’s Luxe Package, bundling Full Self-Driving (Supervised), four years of Premium Service, free lifetime Supercharging, and a Signature Edition key fob. Both are priced at $159,420, a roughly $35,000 premium over standard Plaid inventory.
The discontinuation is part of a broader strategic shift. At Tesla’s Q4 2025 earnings call, Musk described the decision as “slightly sad” but necessary, saying: “It’s time to basically bring the Model S and X programs to an end with an honorable discharge, because we’re really moving into a future that is based on autonomy.”
The Fremont factory floor that built these cars is being converted to manufacture Optimus humanoid robots, with a target of one million units annually.
Elon Musk
Tesla FSD in Europe vs. US: It’s not what you think
Tesla FSD is approved in the Netherlands, but the European version differs from what US drivers use.
On April 10, 2026, the Dutch vehicle authority RDW granted Tesla the first European type approval for Full Self-Driving Supervised, making the Netherlands the first country on the continent to authorize Tesla’s semi-autonomous system for customer use on public roads.
As Teslarati reported, the RDW approval followed 18 months of testing, more than 1.6 million kilometers driven on EU roads, 13,000 customer ride-alongs, and documentation covering over 400 compliance requirements. Tesla Europe had been running public demo drives through cities like Amsterdam and Eindhoven since early 2026, giving passengers their first experience of the system on European streets.
The European version of FSD is not the same software US drivers use. The RDW’s own statement is direct, noting that the software versions and functionalities in the US and Europe “are therefore not comparable one-to-one.” We’ve compile a table below that captures the most significant differences between US-based Tesla FSD vs. European Tesla FSD that’s based on what regulators and Tesla have publicly confirmed.
| Feature | FSD US | FSD Europe (Netherlands) |
| Regulatory framework | Self-certification, post-market oversight | Pre-market type approval required (UN R-171 + Article 39) |
| Hands requirement | Hands-off permitted on highway | Hands must be available to take over immediately |
| Auto turning from stop lights | Available — navigates intersections, turns, and traffic signals autonomously | Available in EU build — confirmed in Amsterdam demo footage handling unprotected turns and signalized intersections |
| Driving modes | Multiple profiles including a more aggressive “Mad Max” mode | EU build is more conservative by default and errs on the side of restraint when it cannot confirm the limit |
| Summon | Available — Smart Summon navigates parking lots to driver | Status unclear — not confirmed as part of the RDW-approved feature set; urban FSD approval targeted separately for 2027 |
| Driver monitoring | Camera-based eye tracking | Stricter continuous monitoring with more frequent intervention alerts |
| Software version | FSD v14.3 | EU-specific builds that must be separately validated by RDW |
| Geographic restriction | US, Canada, China, Mexico, Australia, NZ, South Korea | Netherlands only; EU-wide vote pending summer 2026 |
| Subscription price | $99/month | €99/month |
| Full urban FSD scope | Available | Partial — separate urban application planned for 2027 |
The approval comes as Tesla is under real pressure to grow FSD subscriptions globally. Musk’s 2025 CEO compensation package, approved by shareholders, includes a milestone requiring 10 million active FSD subscriptions as one condition for his stock awards to vest. Tesla hit one million subscriptions during its Q4 2025 earnings call, which is a meaningful start, but still a long way from the target. Opening Europe as a market for subscriptions, rather than just hardware sales, directly accelerates that number.
Tesla has said it anticipates EU-wide recognition of the Dutch approval during summer 2026, which would extend FSD access to Germany, France, and other major markets through a mutual recognition process without each country repeating the full 18-month review. That timeline is Tesla’s projection, not a confirmed regulatory outcome. As Musk acknowledged at Davos in January 2026, “We hope to get Supervised Full Self-Driving approval in Europe, hopefully next month.”
News
Tesla’s troublesome Auto Wipers get a major upgrade
Tesla has quietly deployed a major over-the-air (OTA) update across its entire fleet, implementing a new patent that could finally solve one of the most complained-about features in its vehicles: the Auto Wipers.
One of Tesla’s most complained-about features is that of the Auto Wipers, but they have recently received a major upgrade that impacts every vehicle in the company’s fleet, a company executive confirmed.
Tesla has quietly deployed a major over-the-air (OTA) update across its entire fleet, implementing a new patent that could finally solve one of the most complained-about features in its vehicles: the Auto Wipers.
Confirmed by senior Tesla AI engineer Yun-Ta Tsai on April 10, the improvement is based on patent US 20260097742 A1. It introduces an “energy balance model” that adds a tactile, physics-driven layer to the existing camera-based system—without requiring any new hardware.
🚨 Tesla has already implemented a new patent that improves the accuracy of the Auto Wiper system https://t.co/QjjKHKxSNv pic.twitter.com/mEbd04oJAu
— TESLARATI (@Teslarati) April 10, 2026
Tesla drivers have griped about auto wipers since the company ditched traditional rain sensors in favor of Tesla Vision around 2018.
Owners routinely report the wipers failing to activate in light drizzle or mist, leaving windshields streaked and visibility dangerously reduced. Just as often, they formerly blasted into high-speed mode on dry, sunny days, screeching across glass and risking scratches or premature blade wear.
This is a rare occurrence anymore, but many owners still report the feature having the wipers perform at the incorrect speed or frequency when precipitation is falling.
Tesla has tried repeatedly to fix the problem through software alone.
Early “Deep Rain” initiatives and the 2023 Autowiper v4 update used multi-camera video and refined neural networks, with Elon Musk promising “super good” performance. The 2024.14 update added manual sensitivity boosts, and later FSD versions claimed further gains. Yet complaints persisted.
Elon Musk apologizes for Tesla’s quirky auto wipers, hints at improvements
Vision systems struggle with edge cases—glare, bugs, reflections, or faint mist—because they rely purely on visual inference rather than physical detection
The new patent takes a different approach. The car’s computer constantly measures electrical power delivered to the wiper motor. It subtracts predictable losses—internal motor friction, linkage drag, and aerodynamic resistance—leaving only the friction force between the rubber blade and windshield glass.
Water lubricates the glass, sharply reducing friction; dry or icy surfaces increase it dramatically. This real-time “tactile” data acts as an independent check on the camera’s visual cues, instantly shutting down false triggers on dry glass and fine-tuning speed for actual rain.
The system can also detect ice and auto-activate defrost heaters, while long-term friction trends alert drivers when blades need replacing.
By fusing vision with precise motor-load physics, Tesla has created a hybrid sensor that is both elegant and cost-free. Owners have waited years for reliable auto wipers; this OTA rollout may finally deliver them.












