Connect with us

News

Tesla Gigafactory records first C-19 case, activates anti-virus measures

Tesla Gigafactory 1, where Model 3 battery cells are produced. (Photo: Tesla)

Published

on

An employee working at Tesla’s Gigafactory Nevada facility has tested positive for COVID-19, according to an email sent to Panasonic employees working on the site. The correspondence was reportedly posted on Sunday, March 29, 2020. 

As noted by News4, the afflicted Gigafactory 1 employee was onsite at the Nevada facility for an hour on March 21 before going home sick. The employee has reportedly remained at home since. The email also remarked that the specific production area where the employee worked has no connection with Panasonic’s lines in the facility. 

With an employee testing positive for the Coronavirus, Tesla has reportedly activated a safety protocol for the scenario. These protocols include a 14-day quarantine for employees identified by their EHS team, as well as thorough cleaning measures for Giga Nevada. Some of these contingencies may be adapted from Tesla China’s experience with the C-19 virus, which forced a temporary shutdown of Gigafactory Shanghai during the peak of China’s outbreak. Tesla China has successfully battled the Coronavirus so far, with no cases having been publicly reported from Gigafactory Shanghai. 

Storey County manager Austin Osborne has recently noted that Tesla’s Gigafactory Nevada facility is reducing its onsite staff by 75%, similar to the Fremont Factory in CA. Meanwhile, Tesla is gearing up to reactivate Gigafactory 2 in Buffalo, NY for the production of ventilators and other pertinent medical equipment, as noted by CEO Elon Musk on Twitter. 

Amidst the news of Tesla’s Gigafactory 1 employee, Ford and the UAW have reported that two employees from the veteran automaker’s Dearborn plant have passed away due to the Coronavirus. One employee was reportedly based at Dearborn Stamping, and another was working at the Ford Data Center at Dearborn. Ford spokeswoman Kelli Felker confirmed the news in a statement to The Detroit Free Press.

“We are saddened to report that two Ford team members who worked in Dearborn passed away after contracting COVID-19. It is a tragic reminder that the coronavirus crisis is everywhere and requires the attention of all of us. Our thoughts are with their families, friends, and co-workers during this difficult time. Nothing is more important than the health and safety of our workforce, dealers, customers, and communities. We will continue to follow the guidance from global health experts to do all we can to keep our people healthy,” Felker said. 

Advertisement
-

American automakers are currently working to help support the country’s medical infrastructure. General Motors, for one, recently put hundreds of workers on an urgent project to build ventilators for medical workers. Despite criticism from US President Donald Trump, GM is expecting to start producing ventilators in mid-April, eventually ramping to a rate of 10,000 per month as quickly as it can. GM is currently working with Ventec Life Systems for the project. 

Tesla, on the other hand, is working with Medtronic to build ventilators at its Gigafactory 2 facility in New York. In an interview with CNBC, Medtronic CEO Omar Ishrak mentioned that one of his company’s ventilators would be produced by Tesla. “We’re also opening up with other partners who have come forward. Tesla is one that I think people have heard about. One of our ventilators will be made by them, and they’re fast on track to make that as well,” Ishrak said.

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla Robotaxi will be a 24/7 service: here’s when

Published

on

Credit: @AdanGuajardo/X

Tesla AI lead Ashok Elluswamy said this week that 24-hour Robotaxi service is close. Replying on X to a rider who wanted Cybercab trips all night, he wrote that the capability would arrive “next month or so” once “the next tech to merge on the v15 plan” is ready.

The comment landed on September 4, one day after Tesla opened public Cybercab rides in Austin. It is the clearest near-term timeline yet for overnight unsupervised operation. Tesla’s paid Robotaxi network currently runs from 6 a.m. to 10 p.m. seven days a week across Austin, Dallas, Houston, Miami, Orlando, and Tampa.

That 16-hour window is shorter than the 6 a.m. to 2 a.m. schedule the company used for much of the prior year.

Elluswamy did not name the specific feature or say whether the change would apply first to purpose-built Cybercabs, the existing Model Y fleet, or both. He also offered no city-by-city rollout list. The link to Full Self-Driving v15 is nevertheless significant.

Tesla has described v15 as a step-change architecture with seven parallel improvement tracks and roughly ten times more parameters than earlier builds. Early versions of that software already operate on the Robotaxi fleet and contain about 40 percent of the planned gains.

By July 2026, the unsupervised fleet had logged more than 380,000 miles across six cities in two states with what the company called an impeccable safety record and no notable incidents caused by the vehicles themselves. Tesla has repeatedly argued that camera-based end-to-end neural networks, rather than extra sensors, are the core of the solution.

Overnight service would test that claim in lower-light conditions and would also raise vehicle utilization, a key variable for Robotaxi unit economics. The company has already begun using public Superchargers at night and is building dedicated Robotaxi charging sites.

Riders have asked why software must change if the cars already drive in the dark. The practical answer appears to be reliability and scale: Tesla has held back mass expansion until more of the v15 stack is merged, citing the need for higher confidence before putting thousands of unoccupied vehicles on streets around the clock.

If the next module arrives on the timetable Elluswamy sketched, 24-hour service could begin in October 2026 in at least some markets.

That would mark a shift from a daytime-bounded pilot to a service that can run whenever demand exists, including the late-night hours that have so far remained out of reach.

Continue Reading

News

Tesla Full Self-Driving will now overtake manual driving to avoid disaster

Published

on

Credit: Tesla

Tesla is beginning to roll out Full Self-Driving Supervised v14.3.9 with a new active safety layer that can take control even when the driver is operating the car manually.

Tesla AI said the software can activate FSD on the driver’s behalf when an imminent collision is detected and Automatic Emergency Braking may not be enough. It may also engage if the system detects heavy distraction or an accidental FSD disengagement.

The capability is essentially Automatic Collision Evasion. However, unlike conventional AEB, which mainly applies the brakes in a straight line, this feature can use steering, braking, and acceleration together if the car calculates that stopping alone will not prevent impact and a safer path exists. The system may change lanes or move toward a shoulder when conditions allow, then continue driving after the immediate threat is handled rather than simply coming to a stop.

The intervention is meant as a last-resort safety net, not a replacement for attentive driving.

Tesla Full Self-Driving v14.3.7 early review: FSD saved me from an accident

Tesla’s own description still frames FSD as supervised assistance. Secondary reports on internal release notes say the feature can fire while the car is being driven manually if cabin-camera monitoring suggests the driver is not sufficiently attentive, such as reaching toward the back seat, or if FSD appears to have been turned off unintentionally.

After the emergency maneuver, the car is expected to alert the driver and request a return to manual control.

The safety case is straightforward. Many collisions happen in the last second because a driver is looking away, fumbles a control, or faces an obstacle that braking cannot fully solve. A system that can both recognize that AEB is insufficient and execute a coordinated evasive path can reduce those remaining high-severity events.

Re-engaging after accidental disengagement also addresses a practical failure mode: a small steering nudge that drops FSD at the worst moment. The advantage is a background safety net that uses the same vision stack already running in v14, instead of leaving the car solely to emergency braking once the driver is no longer in command.

The feature still depends on FSD being enabled and, according to reports, an active FSD purchase or subscription. It does not make the vehicle unsupervised. Drivers remain responsible, and Tesla has not published how often the system is expected to intervene or how it will handle false positives.

If the rollout is conservative and the false-alarm rate stays low, the update is a meaningful step: FSD is no longer only a feature the driver turns on. In the rare moments when disaster is already forming, it can step in.

Continue Reading

News

Tesla Cybercab launch catches NHTSA’s attention who wants to know more

Published

on

(Credit: Teslarati)

Tesla launched the all-electric, steering wheel-less, and pedal-less Cybercab last night at a quiet and small event in downtown Austin, Texas.

The launch, which marked the beginning of unsupervised ride-hailing for Tesla’s Robotaxi platform with Cybercab, has already caught the attention of the National Highway Traffic Safety Administration (NHTSA) who has more questions.

NHTSA opened an Audit Query (AQ) into the Cybercab’s Federal Motor Vehicle Safety Standards (FMVSS) certification that Tesla gave the vehicle. Manufacturers self-certify vehicles much of the time to avoid excessive regulatory delays.

Tesla Cybercab interior, note the lack of steering wheel and pedals. (Credit: @niccruzpatane/X< /a>)

However, the agency needs more information; it said in a summary:

“On September 3, 2026, Tesla began commercial deployment with a small number of its Cybercab vehicles in Austin, Texas. Tesla notified the Agency that it certified those Cybercab vehicles as compliant with all applicable Federal Motor Vehicle Safety Standards (FMVSS). Tesla also notified the Agency that it plans to gradually expand commercial deployment of the Cybercab to include additional vehicles and locations.”

It also went on to state that the Cybercab lacks traditional automotive controls, which is a groundbreaking move. The process is entirely new to the NHTSA, which gives the agency some leverage to put Tesla’s launch under a microscope:

“The vehicles lack permanently attached, conventional manual controls, such as a brake pedal, gas pedal, steering wheel, and mirrors. NHTSA is opening this AQ to examine the process and technical data on which Tesla relied when certifying the Cybercab and related issues. Among other things, NHTSA will consider the extent to which Tesla’s certification depended on determinations that certain FMVSS are inapplicable to the Cybercab.”

Tesla has added 45 Cybercab units to its fleet of Robotaxi-enabled cars in Austin, according to public documents the company submitted to the State of Texas over the past week. Enabling this level of self-driving is something Tesla has worked toward for many years, and now that it is finally here, it seems more than reasonable that regulatory agencies will have some questions.

Many outlets might try to frame this as a negative, but it is truly an agency looking to gain more information about groundbreaking tech that Tesla has been developing for years.

In an effort to keep riders, pedestrians, and property safe, any and all data accumulated from these first days, weeks, and months of rides will likely be shared with the NHTSA to enable broader rollout strategies across the United States and more in the future.

Continue Reading