Toyota Chairman Takeshi Uchiyamada recently confirmed that the Japanese automaker is preparing to launch the second-generation of its hydrogen fuel-cell car, the Mirai, next year. The executive shared an update on the upcoming vehicle while speaking at an international ministerial meeting on hydrogen energy in Tokyo, Japan.
The Japanese carmaker has not revealed any teasers for the upcoming vehicle yet, though concerns from the auto community have emerged about the design of the upcoming zero-emissions car. The original Mirai was already polarizing due to its rather over-styled appearance, and this might only get even more pronounced in the 2020 vehicle, considering Toyota’s recent tendency to adopt more radical designs for its vehicles.
In a previous statement at the Automotive News Europe Congress earlier this year in Gothenburg, Sweden, Toyota European head of sales and marketing Matt Harrison noted that the company expects the price of hydrogen vehicles to match hybrids within 10 years, and price parity to be reached once the third generation of H2 fuel cell vehicles are released.
“By the third generation, we fully expect fuel cell costs to be comparable with hybrids. We believe fuel cell vehicles have a huge potential,” he said.
The Mirai was launched in late 2014 as part of Toyota’s development of zero-emissions vehicles. Marketed as the company’s first mass-market hydrogen fuel-cell car, the Mirai was generally expected to do for hydrogen fuel-cell cars what the ubiquitous Prius did for hybrid vehicles.
It failed in this regard. Due in no small part to the lack of hydrogen fuel stations across the globe, the adoption of hydrogen fuel cell vehicles has been incredibly slow. In California, for example, there are 33 hydrogen stations, far less than the number of electric vehicle charging stalls in the state. And with the emergence of bang-for-your-buck all-electric vehicles like the Tesla Model 3 Standard Range Plus, vehicles like the Mirai run the risk of being unnecessary.
This lack of charging stations is a notable Achilles Heel for hydrogen cars, considering that their one advantage over pure EVs is supposed to be their longer range. Such advantages are a moot point if there are not enough places to refuel the vehicle. Add the fact that the Mirai starts at around $58,500 in the United States and it becomes very difficult to justify its purchase over the sub-$40,000 Tesla Model 3 Standard Range Plus, which is supported by the Supercharger Network, and has features like basic Autopilot as standard.
Overall, Toyota’s next-generation Mirai could very well follow the footsteps of its predecessor, perhaps because it is yet another vehicle that promises change down the road. Such is an idea that is not as attractive as it was years ago, as all-electric cars such as the Tesla Model 3 and the Porsche Taycan are already initiating change in the mindset of car buyers today.
Tesla is planning to improve one of the best features on its lineup of cars, a new patent shows. Tesla’s massive glass roof on its premium models is among the coolest additions to the all-electric vehicles, but the design certainly has its complaints, especially from those who live in even slightly warm climates.
Tesla has published a new patent that promises to transform cabin comfort in its electric vehicles, particularly those equipped with the expansive glass roofs.
The document, identified as US20260091643A1 and titled “Airflow Optimization for Cabin Comfort“, addresses that common complaint. Sunlight streaming through windshields and panoramic roofs creates localized hot air pockets near the dashboard and headliner. These pockets generate significant temperature gradients that conventional heating, ventilation, and air conditioning systems struggle to manage evenly.
The exposure to direct sunlight can make the cabin extremely warm, and even after cooling down the interior temperature, combating the continuous stream of sunlight and heat is a challenge. It uses precious energy that is especially pertinent to range and efficiency.
The patent explains how standard dashboard vents push cool air upward, only to entrain warmer air from these stagnant zones and distribute it throughout the occupied cabin space. This process forces the blower to operate at higher speeds, increasing energy consumption and reducing overall efficiency.
In electric vehicles, where every watt impacts driving range, such inefficiencies prove costly.
🚨 THE MODEL Y L IS THE MOST WATCHED EV LAUNCH OF 2026. ITS GLASS ROOF HAS ONE WEAKNESS — AND A PATENT PUBLISHED THIS WEEK SHOWS @TESLA BUILT THE FIX
The Model Y L launched in China and is now arriving in Korea, Japan, and across Asia-Pacific. It also has a glass roof. So does… https://t.co/wr6XnBn1Oc pic.twitter.com/5sYpniXJbU
— SETI Park (@seti_park) April 5, 2026
Research from AAA indicates that air conditioning can diminish range by up to 17 percent under hot conditions. Tesla’s innovation shifts the approach by extracting heat at its source rather than attempting to dilute it after mixing occurs.
Engineers describe a suction HVAC unit connected to dedicated intakes positioned strategically on the upper dashboard surface and within the headliner.
These intakes link to a hot air pocket extraction duct that channels the warmest air directly into the system’s plenum for conditioning. As the blower activates, it simultaneously draws recirculated cabin air and targeted hot pocket air through filters and cooling coils before redistributing conditioned airflow.
It seems somewhat reminiscent of the Tesla heat pump, which aims to combat colder temperatures.
Tesla highlights Model Y’s heat pump innovations in new promotional video
This method reduces entrainment, lowers peak temperatures, and achieves more uniform comfort levels. Testing data reveals that facial temperature gradients drop from 21 degrees Celsius, or 69.8 degrees Fahrenheit, in conventional setups to just 12 degrees Celsius (53.6 degrees F) with the new system. Blower speeds and compressor power requirements decrease appreciably as a result.
The design incorporates smart controls that monitor sunlight intensity and internal temperature distributions in real time. Suction activates selectively only where needed, optimizing energy use without constant high demand. Furthermore, the extraction duct serves a dual purpose.
In the summer months, it pulls hot air inward for cooling; in winter, it reverses to direct warm air outward for rapid windshield defrosting. This versatility allows the reuse of existing hardware with minimal modifications, potentially enabling retrofits in current Tesla fleets.
Lifestyle
Tesla saves its passengers again – This time after a 300-foot cliff fall in Malibu
A Tesla Model 3 fell 300 feet off a Malibu cliff and both passengers survived.
A Tesla Model 3 plunged roughly 300 feet off a cliff on Mulholland Highway in Malibu on Friday morning, May 29, 2026, and both occupants survived. The crash was reported at approximately 7:30 a.m. near the 2500 block of Mulholland Highway, triggering a multi-agency rescue operation involving Malibu Search and Rescue, the Los Angeles County Fire Department, the California Highway Patrol, and McCormick Ambulance.
When first responders arrived, the male driver was outside the vehicle shouting for help while the female passenger remained pinned inside the Tesla. Rescue crews rappelled down the cliffside on ropes to reach the wreckage. A flight medic was lowered by helicopter to begin treating both victims, and the driver was hoisted up to the roadway before crews used the Jaws of Life to free the trapped passenger. Both were airlifted to a local trauma center with moderate injuries despite a remarkable result for a fall that steep.
The outcome is not surprising, considering Model 3 earned an overall 5-star rating from NHTSA in every category and sub-category, and recorded the lowest probability of injury of any car ever evaluated by the U.S. New Car Assessment Program. The absence of a traditional engine in the front of the vehicle creates a longer crumple zone that absorbs impact energy before it reaches occupants, and the battery pack running along the floor gives the car an unusually low center of gravity that reinforces structural rigidity.
This is not the first time a Tesla has kept passengers alive after going off a cliff. A Tesla Model Y carrying a family of four survived a plunge off a cliff at Devil’s Slide near San Francisco in January 2023, with two adults and two children walking away from a 250-foot fall. That incident drew widespread attention to how the structural integrity of Tesla’s electric platform performs in extreme crash scenarios that most vehicles would not survive.
Tesla Model Y driver who drove off cliff with family attempts to avoid criminal conviction
Tesla Full Self-Driving (Supervised) has taken yet another significant step forward in Europe. On May 29, Estonia became the third European Union country to approve the advanced driver-assistance technology, following approvals in the Netherlands and Lithuania.
Tesla Europe announced the news on X, confirming the expansion has continued across the continent that, at one time, seemed to be taking its sweet old time giving any approval to the FSD suite.
FSD Supervised now approved in Estonia🇪🇪. Rollout will begin soon pic.twitter.com/y5a64qlp5m
— Tesla Europe, Middle East & Africa (@teslaeurope) May 29, 2026
Estonia’s Transport Administration (Transpordiamet) granted the approval by recognizing the type certification issued by the Dutch vehicle authority RDW. This mutual recognition mechanism, enabled by EU regulations, allows other member states to fast-track deployment without repeating extensive local testing.
The Estonian authority noted that Tesla’s FSD had undergone rigorous evaluation on European roads for approximately 18 months before the initial Dutch approval in April 2026.
FSD Supervised remains classified as a Level 2 advanced driver-assistance system (ADAS). Drivers must maintain full attention, keep their hands on the wheel, and stay ready to intervene at any moment.
The system assists with tasks such as automatic lane changes, navigation through city streets, and responding to traffic objects, but it does not constitute full autonomy. Estonian officials emphasized this distinction, underscoring that safety responsibility lies entirely with the driver.
The rapid progression across the Baltic region highlights Tesla’s strategic approach to European expansion. The Netherlands provided the foundational type approval in April, unlocking doors for neighboring countries.
Lithuania followed swiftly in mid-May, with rollout beginning shortly thereafter. Estonia’s decision, coming just days later, demonstrates how smaller, digitally progressive nations are accelerating adoption.
Tesla owners in Estonia can expect an over-the-air software update in the coming weeks, bringing the latest FSD capabilities to compatible vehicles
This expansion builds on Tesla’s global momentum. FSD Supervised is now available in 11 countries worldwide, including the United States, Canada, Australia, and South Korea. In Europe, the approvals signal growing regulatory confidence in Tesla’s vision-based AI approach, which relies on cameras and neural networks rather than lidar or radar-heavy alternatives used by some competitors.
For Tesla, these European milestones are more than symbolic. They validate years of data collection and software iteration while opening new revenue streams through FSD subscriptions and purchases.
As the company continues refining its AI models with real-world miles from diverse driving environments, including Estonia’s variable winter conditions, the dataset grows richer, potentially benefiting global users.
Tesla plans ingenious improvement to one of its best features
Tesla saves its passengers again – This time after a 300-foot cliff fall in Malibu
