Connect with us

News

SpaceX set for third Falcon Heavy launch: here’s how to watch live

The first Falcon Heavy Block 5 rocket lifts off from Pad 39A on April 11th. Both side boosters will be reused on Flight 3, also known as STP-2. (Pauline Acalin)

Published

on

SpaceX is T-18 hours to its second Falcon Heavy launch in barely 70 days, set to lift off with the Department of Defense’s Space Test Program-2 (STP-2) rideshare mission no earlier than (NET) 11:30 pm EDT (03:30 UTC), June 24th.

According to SpaceX CEO Elon Musk, STP-2 is without a doubt the company’s “most difficult launch ever”, owing to a multitude of high-stakes performance requirements, US military and NASA oversight, several technical milestones, challenging booster and fairing recoveries, and much, much more. Should SpaceX succeed on all fronts, the company will have taken a massive leap towards being able to offer competitive launch services that can fulfill all of the US government’s many different spaceflight needs.

Prelaunch Appetizers ???

Challenges all the way down

Likely the single most challenging aspect of STP-2 is the performance the mission’s Falcon 9 upper stage will have to deliver. SpaceX describes the challenge below:

“[The STP-2 mission] will deliver 24 satellites to space on the DoD’s first-ever SpaceX Falcon Heavy launch. [It] will be among the most challenging launches in SpaceX history, with four separate upper-stage engine burns, three separate deployment orbits, a final propulsive passivation maneuver, and a total mission duration of over six hours.”
SpaceX.com/STP-2

According to older USAF documents (STP-2’s original launch target was mid-2015), those numbers could actually rise as high as five separate upper-stage Merlin Vacuum burns and a mission duration of more than 7.5 hours. Given the last-second decision to move Falcon Heavy’s center core recovery from ~40 km offshore to more than 1240 km offshore, it’s fairly likely that five burns and 7.5 hours will be closer to the reality of STP-2. In short, the center core will move from a gentle recovery to what will probably be SpaceX’s hottest and hardest booster recovery ever to transfer as much margin as possible to STP-2’s upper stage.

Falcon Heavy’s upper stage discards its payload fairing to prepare the STP-2 payload stack for deployment. (SpaceX)

With regard to that extra spicy reentry, Falcon Heavy center core B1057 – the second Block 5 center core built by SpaceX – is now expected to attempt a landing aboard drone ship Of Course I Still Love You (OCISLY) more than 1240 km (770 mi) off the coast of Florida, potentially smashing the current record of ~970 km (600 mi).

At the same time, fairing recovery vessel GO Ms. Tree (formerly Mr. Steven; renamed due to change in ownership) is steaming hard, heading anywhere from 1400-1600 km into the Atlantic Ocean. Falcon Heavy STP-2 will be the vessel’s first attempted fairing catch since December 3rd, 2018, nearly seven months ago. It will likely crush the previous record for most distant fairing recovery attempt by 50% or more. Whether or not the vessel succeeds and catches its first Falcon fairing(s) ever, it’s exciting to see Ms. Tree (Mr. Steven) out and about for a fairing recovery after months of inactivity.

Falcon Heavy Flight 2. The booster in the middle - B1055 - was effectively sheared in half after tipping over aboard drone ship OCISLY. (Pauline Acalin)
Falcon Heavy Flight 2 readies for launch with three Block 5 boosters; B1052, B1053, and center core B1055. (Pauline Acalin)

As always, SpaceX will host an official Falcon Heavy STP-2 livestream, beginning around T-15 minutes and likely lasting at least 1-2 hours as the rocket’s upper stage prepares for a ~7.5-hour orbital marathon.

Want to remember the awesomeness of Falcon Heavy every single day? Consider a limited-edition set of high-quality prints, signed by both Teslarati photographers to commemorate the rocket’s inaugural Starman launch.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Tesla winter weather test: How long does it take to melt 8 inches of snow?

Published

on

Credit: Teslarati

In Pennsylvania, we got between 10 and 12 inches of snow over the weekend as a nasty Winter storm ripped through a large portion of the country, bringing snow to some areas and nasty ice storms to others.

I have had a Model Y Performance for the week courtesy of Tesla, which got the car to me last Monday. Today was my last full day with it before I take it back to my local showroom, and with all the accumulation on it, I decided to run a cool little experiment: How long would it take for Tesla’s Defrost feature to melt 8 inches of snow?

Tesla Model Y Performance set for new market entrance in Q1

Tesla’s Defrost feature is one of the best and most underrated that the car has in its arsenal. While every car out there has a defrost setting, Tesla’s can be activated through the Smartphone App and is one of the better-performing systems in my opinion.

It has come in handy a lot through the Fall and Winter, helping clear up my windshield more efficiently while also clearing up more of the front glass than other cars I’ve owned.

The test was simple: don’t touch any of the ice or snow with my ice scraper, and let the car do all the work, no matter how long it took. Of course, it would be quicker to just clear the ice off manually, but I really wanted to see how long it would take.

Tesla Model Y heat pump takes on Model S resistive heating in defrosting showdown

Observations

I started this test at around 10:30 a.m. It was still pretty cloudy and cold out, and I knew the latter portion of the test would get some help from the Sun as it was expected to come out around noon, maybe a little bit after.

I cranked it up and set my iPhone up on a tripod, and activated the Time Lapse feature in the Camera settings.

The rest of the test was sitting and waiting.

It didn’t take long to see some difference. In fact, by the 20-minute mark, there was some notable melting of snow and ice along the sides of the windshield near the A Pillar.

However, this test was not one that was “efficient” in any manner; it took about three hours and 40 minutes to get the snow to a point where I would feel comfortable driving out in public. In no way would I do this normally; I simply wanted to see how it would do with a massive accumulation of snow.

It did well, but in the future, I’ll stick to clearing it off manually and using the Defrost setting for clearing up some ice before the gym in the morning.

Check out the video of the test below:

Continue Reading

News

Tesla Robotaxi ride-hailing without a Safety Monitor proves to be difficult

Published

on

Credit: Grok Imagine

Tesla Robotaxi ride-hailing without a Safety Monitor is proving to be a difficult task, according to some riders who made the journey to Austin to attempt to ride in one of its vehicles that has zero supervision.

Last week, Tesla officially removed Safety Monitors from some — not all — of its Robotaxi vehicles in Austin, Texas, answering skeptics who said the vehicles still needed supervision to operate safely and efficiently.

BREAKING: Tesla launches public Robotaxi rides in Austin with no Safety Monitor

Tesla aimed to remove Safety Monitors before the end of 2025, and it did, but only to company employees. It made the move last week to open the rides to the public, just a couple of weeks late to its original goal, but the accomplishment was impressive, nonetheless.

However, the small number of Robotaxis that are operating without Safety Monitors has proven difficult to hail for a ride. David Moss, who has gained notoriety recently as the person who has traveled over 10,000 miles in his Tesla on Full Self-Driving v14 without any interventions, made it to Austin last week.

He has tried to get a ride in a Safety Monitor-less Robotaxi for the better part of four days, and after 38 attempts, he still has yet to grab one:

Tesla said last week that it was rolling out a controlled test of the Safety Monitor-less Robotaxis. Ashok Elluswamy, who heads the AI program at Tesla, confirmed that the company was “starting with a few unsupervised vehicles mixed in with the broader Robotaxi fleet with Safety Monitors,” and that “the ratio will increase over time.”

This is a good strategy that prioritizes safety and keeps the company’s controlled rollout at the forefront of the Robotaxi rollout.

However, it will be interesting to see how quickly the company can scale these completely monitor-less rides. It has proven to be extremely difficult to get one, but that is understandable considering only a handful of the cars in the entire Austin fleet are operating with no supervision within the vehicle.

Continue Reading

News

Tesla gives its biggest hint that Full Self-Driving in Europe is imminent

Published

on

Credit: BLKMDL3 | X

Tesla has given its biggest hint that Full Self-Driving in Europe is imminent, as a new feature seems to show that the company is preparing for frequent border crossings.

Tesla owner and influencer BLKMDL3, also known as Zack, recently took his Tesla to the border of California and Mexico at Tijuana, and at the international crossing, Full Self-Driving showed an interesting message: “Upcoming country border — FSD (Supervised) will become unavailable.”

Due to regulatory approvals, once a Tesla operating on Full Self-Driving enters a new country, it is required to comply with the laws and regulations that are applicable to that territory. Even if legal, it seems Tesla will shut off FSD temporarily, confirming it is in a location where operation is approved.

This is something that will be extremely important in Europe, as crossing borders there is like crossing states in the U.S.; it’s pretty frequent compared to life in America, Canada, and Mexico.

Tesla has been working to get FSD approved in Europe for several years, and it has been getting close to being able to offer it to owners on the continent. However, it is still working through a lot of the red tape that is necessary for European regulators to approve use of the system on their continent.

This feature seems to be one that would be extremely useful in Europe, considering the fact that crossing borders into other countries is much more frequent than here in the U.S., and would cater to an area where approvals would differ.

Tesla has been testing FSD in Spain, France, England, and other European countries, and plans to continue expanding this effort. European owners have been fighting for a very long time to utilize the functionality, but the red tape has been the biggest bottleneck in the process.

Tesla Europe builds momentum with expanding FSD demos and regional launches

Tesla operates Full Self-Driving in the United States, China, Canada, Mexico, Puerto Rico, Australia, New Zealand, and South Korea.

Continue Reading