News
Porsche Taycan debut set for September 4, top facts about upcoming sports EV emerge
Porsche has confirmed that the formal debut of its first modern all-electric car, the Taycan, is set for September 4, 2019 at 9 a.m. EST. The vehicle will be launched at three locations: one in Canada, one in Germany, and another in China. With the Taycan’s launch, Porsche would be breaching a premium EV market that is so far dominated by Tesla and increasingly populated by veteran automakers such as Jaguar, Audi, and Mercedes-Benz.
The Taycan’s unveiling is only a few weeks away, and Porsche has been notably more open about giving access to its highly-secretive vehicle to the media. So far, the vehicle has been received extremely well. Fifth Gear presenter and Fully Charged host Jonny Smith, for one, was allowed to test the repeatability of the Taycan Turbo’s maximum performance during launches. The vehicle proved impressive for the host, as he was able to launch at max power 26 times with nary a drop in the car’s 0-60 mph performance.
Motoring publication Car and Driver was also able to experience the Porsche Taycan Turbo. Together with Porsche product line director for EVs Robert Meier, the publication was able to get some unique insights on the upcoming vehicle. The Taycan pre-production prototype, behind all its camouflage, was equipped with active anti-roll bars, carbon-ceramic brake rotors, rear-wheel steering, air springs, and a 21″ wheel and tire setup.
During Car and Driver‘s ride-along, Meier noted that the Taycan, thanks to its floor-mounted battery pack, actually has the lowest center of gravity in the company’s entire lineup. Comfort was a key portion of the Taycan’s development process as well, considering that the vehicle will be marketed as a four-door sedan that’s a step beneath the Panamera (and in turn, the Tesla Model S) in size. Highlighting the Taycan’s quickness, the Porsche executive noted that the vehicle will not see a drop in performance even when the battery is discharged past 50%.
Also notable is that the Taycan, unlike Tesla’s offerings like the Model 3 Performance, features a two-speed gearbox on its rear axle. This marks one of the first times that a production EV will be equipped with a two-speed gearbox, and it should provide a sizable benefit in both performance and efficiency. It would be interesting to see how Porsche manages the Taycan’s gearbox, considering Tesla’s experience with the original Roadster. During Tesla’s early days, the company equipped the original Roadster with a two-speed gearbox, but the components just kept breaking since the gearboxes could not handle the punishment from the vehicle’s electric motor.
Porsche states that the Taycan will have a range of 500 km (311 miles), though Car and Driver notes that this figure is based on the European NEDC cycle, which is far more generous than the more stringent and real-world accurate EPA cycle. During its ride-along with the vehicle, the publication noted that the Taycan showed a predicted 234 miles of range on a full charge, which reportedly seemed accurate considering that the trip’s route consisted of twisty mountain roads and 70-mph highway cruising. Meier’s comments to the publication’s team about being “conservative” with the Taycan’s range figure further adds to the idea of the vehicle having a US range rating that’s likely closer to 200 than 300 miles.
The Taycan has other notable quirks, including, but not limited to, two charging ports, its lack of one-pedal driving, and its sound, which could be heard especially at low speeds. This was particularly audible during Fully Charged host Jonny Smith’s first drive of the vehicle. With its low, bass-filled whine, the Taycan sounds not unlike those futuristic vehicles in sci-fi films.
Watch Fully Charged‘s experience with the Porsche Taycan Turbo in the video below.
Cybertruck
Tesla Cybertruck’s head-scratching trim sold terribly, recall documents reveal
The head-scratching offering was only available for a few months, and evidently, it did not sell very well, which we all suspected. New recall documents on the vehicle from the National Highway Traffic Safety Administration (NHTSA) now reveal just how poorly it sold.
After Tesla decided to build a Rear-Wheel-Drive Cybertruck trim back in 2025, which was void of many features and only featured a small discount.
The head-scratching offering was only available for a few months, and evidently, it did not sell very well, which we all suspected. New recall documents on the vehicle from the National Highway Traffic Safety Administration (NHTSA) now reveal just how poorly it sold.
The recall deals with a potentially separating wheel stud and potentially impacts 173 Cybertruck units with the 18-inch steel wheels. The Cybertruck RWD was the only trim level to feature these, and the 173 potentially impacted units represent a portion of the population of pickups. Therefore, it’s not the entire number of RWD Cybertruck sold, but it could show how little interest it gathered.
The NHTSA document states:
“On affected vehicles, higher severity road perturbations and cornering may strain the stud hole in the wheel rotor, causing cracks to form. If cracking propagates with continued use and strain, the wheel stud could eventually separate from the wheel hub.”
Only 5 percent are expected to be impacted, meaning less than 10 units will have the issue if the NHTSA and Tesla estimates are correct. Nevertheless, the true story here is how terribly the RWD Cybertruck sold.
Tesla ended production and stopped offering the RWD Cybertruck to customers last September. For just $10,000 less than the All-Wheel-Drive trim, Tesla offered the RWD Cybertruck with just one motor, textile seats instead of leather, only 7 speakers instead of 15, no Rear Touchscreen, no Powered Tonneau Cover for the truck bed, and no 120v/240v outlets.
For just $10,000 more, at $79,990, owners could have received all of those premium features, as well as a more capable All-Wheel-Drive powertrain that featured Adaptive Air Suspension. The discount simply was not worth the sacrifices.
Orders were few and far between, and sources told us that when it was offered, sales were extremely tempered because customers could not see the value in this trim level.
Even Tesla’s most loyal supporters thought the offering was kind of a joke, and the $10,000 extra was simply worth it.
News
Tesla Semi sends clear message to Diesel rivals with latest move
The truck is being built at a dedicated facility in Sparks, Nevada, just next to its Gigafactory Nevada facility.
Tesla has officially launched Semi production at what will be a mind-boggling rate of approximately 50,000 units per year.
The truck is being built at a dedicated facility in Sparks, Nevada, just next to its Gigafactory Nevada facility.
The company finally announced on April 29 that the first Tesla Semi truck has rolled off its new high-volume production line at the factory. This marks the transition from limited pilot builds to scaled manufacturing for the Class 8 all-electric heavy-duty truck, nearly nine years after its dramatic 2017 unveiling.
🚨 Tesla Semi mass production is underway in Nevada!
HUGE! https://t.co/ohgQIiI2bK pic.twitter.com/23GvWr8D27
— TESLARATI (@Teslarati) April 29, 2026
Tesla initially promised high-volume deliveries by 2019–2020, but battery supply constraints and prioritization for passenger vehicles delayed progress. The new 1.7-million-square-foot factory, purpose-built next to Gigafactory Nevada’s 4680 cell production lines, resolves those bottlenecks through deep vertical integration.
The Semi uses Tesla’s structural battery packs with cylindrical 4680 cells manufactured on-site. This integration enables efficient supply, reduced logistics costs, and the potential for high output. The factory is designed for an eventual annual capacity of approximately 50,000 trucks, positioning Tesla to address growing demand in long-haul freight electrification.
Tesla is using a redesigned Cybertruck battery cell to mitigate Semi challenges
Operating economics favor the Semi through dramatically lower fuel and maintenance costs compared to traditional diesel rigs, and companies involved in a pilot program for the Semi with Tesla have shown that.
Electricity is far cheaper than diesel on a per-mile basis, while the electric powertrain features fewer moving parts, reducing service intervals and lifetime expenses. Early deployments with customers like PepsiCo and others have validated these advantages in real-world service.
The Nevada factory’s ramp-up is targeted for full volume output before the end of June 2026, aligning with broader Tesla production goals for 2026. This includes parallel efforts on other new vehicles while expanding the Megacharger infrastructure to support widespread adoption.
By localizing battery and truck production, Tesla gains advantages in cost, quality control, and scalability that many competitors sourcing cells externally lack. The start of high-volume Semi production represents a pivotal step in Tesla’s strategy to electrify heavy transportation, potentially accelerating the shift toward zero-emission freight across North America and beyond.
As output increases, the Semi could reshape long-haul logistics with its combination of performance, efficiency, and sustainability.
News
Tesla gives HW3 owners another massive update
It was an “at last” moment for HW 3 owners, who have waited for an update on the capabilities of their vehicles for some time. After CEO Elon Musk finally admitted last week that the HW3 vehicles would not be capable of unsupervised FSD, it appears Tesla is bringing a new, more transparent tone to those owners.
Tesla is giving Hardware 3 vehicle owners another massive update, the second major communication the company has given to those drivers after what seemed like years of being left out to dry.
The company, which plans to launch a Full Self-Driving version 14 iteration that is compatible with these cars, which have older chips, is now planning to expand the rollout of the v14 Lite offering to other markets, it said on X.
Tesla said:
“Following future rollout of FSD V14 Lite for HW3 vehicles in the US, we plan on expanding V14 Lite to additional international markets. This update ensures that HW3 vehicle owners will continue to benefit from ongoing software updates. Since international rollout is subject to several factors (completion of technical verification, regional adaptation & relevant regulatory approvals), we can’t provide definitive dates at the moment, but will provide updates on a rolling basis.”
This announcement comes at a critical time for HW3 owners, many of whom purchased Full Self-Driving (FSD) capability years ago with promises of ongoing support and future-proofing.
Following future rollout of FSD V14 Lite for HW3 vehicles in the US, we plan on expanding V14 Lite to additional international markets.
This update ensures that HW3 vehicle owners will continue to benefit from ongoing software updates.
Since international rollout is subject to…
— Tesla (@Tesla) April 29, 2026
HW3, introduced in 2019, powers vehicles from roughly 2019 to early 2023 models. While newer AI4 hardware has advanced rapidly, HW3 owners have felt increasingly left behind, with their last major update stuck around version 12.6 since early 2025.
It was an “at last” moment for HW 3 owners, who have waited for an update on the capabilities of their vehicles for some time. After CEO Elon Musk finally admitted last week that the HW3 vehicles would not be capable of unsupervised FSD, it appears Tesla is bringing a new, more transparent tone to those owners.
V14 Lite represents a significant optimization effort. Tesla has confirmed it will bring many core features of the full V14 release, currently running on more powerful hardware, to the more constrained HW3 platform.
Expected capabilities include improved handling of complex urban scenarios, better reverse driving, enhanced parking features, and smoother overall autonomy, albeit in a “lite” form tailored to HW3’s compute limits. Tesla’s head of Autopilot, Ashok Elluswamy, noted during the Q1 2026 earnings call that the update is targeted for late June in the U.S.
Tesla is releasing a modified version of FSD v14 for Hardware 3 owners: here’s when
The international expansion is particularly meaningful for owners in Europe, Asia, Australia, and other regions where FSD rollout has lagged due to regulatory hurdles.
Tesla emphasized that timing remains fluid, dependent on “technical verification, regional adaptation & relevant regulatory approvals.” No firm dates were provided, but the company pledged rolling updates as milestones are achieved.
This move addresses growing concerns that Tesla might abandon legacy hardware. With the recent admission that its capabilities are limited and not capable of Tesla’s grand autonomy ambitions, owners are finally in the light of truth, with more honesty being put forth as the company navigates this chapter.
For Tesla, keeping HW3 relevant strengthens customer loyalty and protects the value of older vehicles. It also buys time as the company pushes toward broader regulatory approvals and unsupervised autonomy on newer platforms.
While V14 Lite isn’t the full unsupervised experience once promised, it delivers tangible improvements and signals that HW3 owners are not being forgotten.
As Tesla continues its rapid AI and autonomy evolution, this update underscores a key principle: software can breathe new life into existing hardware. For tens of thousands of HW3 drivers worldwide, V14 Lite could mark the beginning of a renewed era of confidence in their vehicles.
Tesla Cybertruck’s head-scratching trim sold terribly, recall documents reveal
Tesla Semi sends clear message to Diesel rivals with latest move
