News
SpaceX CEO Elon Musk’s Starship presentation will have to wait a few more weeks
While the FAA’s slow pace continues to delay Starhopper’s second major flight test, SpaceX CEO Elon Musk says that his planned Starship 2019 presentation will also be delayed and will instead follow a major integration milestone for the first orbital-class Starship prototype.
That milestone – likely representing the preliminary completion of Starship Mk1’s primary structure – could apparently come as early as mid-September, a claim that is at least partially supported by the relentless progress SpaceX has made in the last few weeks. Although a 200m (650 ft) Starhopper flight test would undeniably bode well for the health of SpaceX’s full-scale Raptor engine development, the partial completion of the first orbital-class Starship prototype would carry far more weight for the whole of SpaceX’s next-generation, fully-reusable launch vehicle.
Back in early August, about a week after Starhopper completed its inaugural July 25th flight test, Musk tweeted that his promised Starship update presentation would take place on August 24th, previously hoped to be “a few weeks” after Starhopper’s second major flight test.
He quickly confirmed that it would take place in Boca Chica, Texas, while also cryptically adding that Starship Mk1 could be “almost ready to fly” by then. This led your author to speculate just yesterday that any further FAA-related Starhopper delays could very well push the low-fidelity testbed into early retirement if Starships Mk1 and Mk2 can maintain their extremely rapid rate of progress.
“According to Musk, either or both of those orbital-class prototypes could be ready for their inaugural flight tests as early as mid-September, perhaps just 1-2 months from now. Given that Starships Mk1 and Mk2 are significantly higher fidelity than Starhopper, the ungainly testbed will likely become redundant the moment that its successors are ready for flight. In other words, Starhopper is fast approaching the end of its useful life, and SpaceX’s fight for a 200m hop-test permit could ultimately be a waste of time, effort, and money if said permit doesn’t also cover Starship Mk1.”
Teslarati.com, August 20th, 2019
Over the course of the last 3-4 weeks, SpaceX’s Starship assembly progress has been absolutely relentless, ranging from adding 20+ meters of height to tank sections, installing major fuel tank bulkheads, and more. Most notably, and to be discussed in greater detail in an upcoming Teslarati article, SpaceX has accepted delivery and begun installation of two identical triple-Raptor thrust structures and bulkhead seals in both Texas and Florida.
Additionally and at least as excitingly, SpaceX’s Boca Chica facilities accepted delivery of what is – by all appearances – the first finished Starship landing leg, likely one of two actuating fins per a September 2018 design update. According to Musk, the design of Starship’s aerodynamic control surfaces and legs has changed since that 2018 update, but the leg that was delivered on August 18th certainly looks almost exactly like those pictured in official SpaceX media dated before Musk’s reported changes.
Just like official pre-steel renders from SpaceX, the delivered leg appears to have attachment points and hinges on its cylindrical end, while the bulk of the leg is tapered. Fascinatingly, the leg’s exterior appears to have been constructed primarily via riveting steel, producing an aesthetic that screams “steampunk spaceship”.
In short, given just how fast SpaceX is progressing with Starship Mk1and Mk2 and combined with the FAA’s permitting delays, it’s not surprising in the slightest that CEO Elon Musk has decided that the official 2019 update would be better accompanied by a major Starship Mk1 milestone. According to Musk, Starship Mk1 and Mk2 could actually be ready for their first flight tests – powered by at least three Raptor engines – as early as mid-September to mid-October.
By all appearances, ~4 weeks is an eternity in Starship assembly time and Musk’s now-mid-September presentation will almost certainly be worth waiting for.
Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.
The Tesla Semi was spotted mounted with ground truth validation equipment as the company nears its looming launch. The Semi is Tesla’s Class 8 all-electric truck, and has been utilized in its earlier stages by many companies like PepsiCo. and Frito-Lay, who have been using it in a pilot program.
The Semi was spotted in Sunnyvale, California, and sports a typical ground truth validation unit that Tesla routinely uses on its vehicles. Ground truth validation is essentially the process of training supervised algorithms to ensure they can perform reliably. Tesla typically performs this on vehicles that are being released soon:
Spotted the new semi adorned with ground truthing equipment. Haven’t seen anyone post this so figured I’d share.
The future is autonomous!!@SawyerMerritt @wholemars pic.twitter.com/qkPDHPUQZ6
— Danny (@dannywinner1) June 21, 2026
The Semi being spotted with this type of validation rig is important because it means the company is working on solidifying a Full Self-Driving model for its commercial vehicle offering. This would be a massive development for not only Tesla but also the logistics industry as a whole.
There are strict regulations on driving hours for commercial truck drivers, and autonomy is a way to potentially combat these issues. FSD is already a widely effective way that owners of typical passenger vehicles take stress out of travel. Even launching a semi-autonomous platform for truck drivers to use to increase safety, reduce fatigue, and increase productivity would be a huge development.
Tesla Semi gets strange-but-understandable comparison from Jay Leno
The Semi has already proven to be an ideal solution for companies that use commercial logistics. It has increased efficiency and reduced operating costs for many companies that have been able to use it in pilot programs.
There are expected to be some bumps along the way. Tesla saw some challenges with FSD on the Cybertruck, as it had never had a vehicle with cameras at that height, so some of the features with FSD were not immediately available. Just a week ago, Tesla launched Actually Smart Summon (ASS) for Cybertruck, nearly three years after the vehicle was first delivered to customers.
President Donald Trump unveiled an upgraded Boeing 747-8 at Joint Base Andrews on June 19, 2026, describing the Qatar-gifted aircraft as an interim Air Force One equipped with advanced communications systems, including Starlink, Elon Musk’s SpaceX satellite internet service.
The plane, valued at around $400 million and modified for presidential use, serves as a bridge until the delayed VC-25B replacements arrive. Trump highlighted its luxury features and new technology during remarks to service members.
Trump stated:
“We have communication equipment up there that nobody’s ever seen before. It’s the highest level and, uh, including Starlink. My friend Elon is going to be very happy, but, uh, Starlink and we have, uh, four or five different sets of double and triple communications like people haven’t seen.”
He added:
“And it represents what can happen with hard work, innovation, and aggressive timelines because we did this quickly and yet there’s never been communication like is on this plane.”
🚨 President Trump confirmed today that the new Air Force One is equipped with Starlink:
“We have communication equipment up there that nobody’s ever seen before, it’s the highest level and including Starlink…my friend Elon is going to be very happy.” pic.twitter.com/IhkDmtr5hL
— TESLARATI (@Teslarati) June 20, 2026
The aircraft features a redesigned red, white, and blue livery and has been outfitted with Starlink satellite connectivity alongside other secure systems.
Trump praised the plane’s uniqueness, calling it among the world’s most luxurious. The gift from Qatar and subsequent modifications have drawn attention, with the jet positioned as a solution for presidential travel. It is expected to support operations, including potential ceremonial roles such as Fourth of July flyovers.
The event marked the formal introduction of the converted jet, which will help maintain capabilities while the primary Air Force One fleet undergoes modernization. Defense observers note the inclusion of commercial satellite technology like Starlink as part of efforts to ensure resilient communications, crucial to keep the country running as the President is in the sky.
President Trump’s comments underscored appreciation for rapid upgrades and innovation in equipping the aircraft. The plane remains a U.S. government asset and is slated for eventual transfer related to presidential library purposes after its service.
Tesla just gave what is perhaps its biggest signal yet that the launch of the Cybercab, its autonomous ride-hailing-geared car, is imminent.
The Cybercab has been spotted outside of Gigafactory Texas in massive numbers over the past few days, with hundreds of units being stored on property just days after the vehicle received a Certificate of Conformity from the EPA.
Today, things were a bit different.
Cybercabs spotted on Giga Texas property today had an addition: a Cybercab decal on the side, reminiscent of the “Robotaxi” ones that were placed on Model Ys just as the company launched its ride-sharing platform about a year ago.
Giga Texas drone operator Joe Tegtmeyer noticed the change today:
Tesla Cybercabs are now getting “Cybercab” logos on the side of them!
Tesla did the same with Model Ys that were given “Robotaxi” logos: https://t.co/DanANtw1m7 pic.twitter.com/FqOhH0S9Ks
— TESLARATI (@Teslarati) June 19, 2026
Tesla could be signaling that the Cybercab is preparing to enter the Robotaxi fleet in the coming weeks or months with this move. It seems more symbolic than anything; Tesla is ready to throw Cybercabs in the ride-hailing platform just as it did with Model Ys last year.
The addition of the Certificate of Conformity awarded to the Cybercab is another major factor working to Tesla’s advantage. The company now has permission from the EPA to allow the vehicle to operate on public roads and enter the chain of commerce. It’s officially street legal.
Tesla Cybercab specs revealed: range, curb weight, range ratings, and more
The big question that remains is whether Tesla will be able to operate the car without a safety monitor, especially considering it plans to put the car out there without a steering wheel or pedals. With the Cybercab only having a seating capacity of two, it is hard to believe Tesla will even consider putting a Safety Monitor in the car.
It did recently self-certify as Level 4 and has the ability to operate driverless vehicles in the State of Texas under a law that took effect on May 28. You can read more about that here:
Tesla’s Robotaxi dreams just took a massive step toward reality
We’d imagine Cybercabs will be on the roads as soon as July, but August will likely be a better estimate of when the car will be entered into the Cybercab fleet. It all depends at where Tesla is, as they’ve truly prioritized safety with the rollout of the Robotaxi platform.
Tesla Semi spotted with ground truth validation equipment as launch looms
President Trump touts new Air Force One with Musk technology
