Space
NASA data points to Mars underground water source at Arcadia Planitia site
Mars’s Arcadia Planitia may be hiding buried treasure. A new global map indicates that the region could be harboring a supply of water, mere inches below its surface.
Armed with fresh data from NASA’s Mars Reconnaissance Orbiter and the Mars Odyssey spacecraft, researchers identified a promising landing spot for future astronauts. The region is located in the planet’s Northern Hemisphere, and has an ample stash of water ice making it an ideal location for any potential human mission to Mars.
A new paper published in Geophysical Research Letters on Dec. 10 details a treasure maps of sorts, pointing to places where researchers believe water ice lurks as little as an inch (2.5 centimeters) below the surface.
Researchers are trying to narrow down the best places for astronauts to land and this discovery puts Arcadia Planitia near the top of the list. Data also shows that because this is a temperate region, basked in plenty of sunlight, it wouldn’t be difficult to uncover the watery bounty.
“You wouldn’t need a backhoe to dig up this ice. You could use a shovel,” lead author Sylvain Piqueux, who studies planetary surfaces at NASA’s Jet Propulsion Laboratory in California, said in a statement.
The Mars we see today is a barren, desert world, devoid of water deposits on its surface. That’s because any liquid water that might trickle on its surface evaporates very quickly. Mars’s once ample atmosphere, eroded over time, stripped away by solar particles, resulting in the thin atmosphere we see today.
As a result, any liquid water on the surface would evaporate immediately when exposed to the thin atmosphere.
That doesn’t mean that Mars is completely devoid of any water on its surface. There’s plenty of water trapped in ice caps at the Martian poles. However, this is a viable solution for human missions as the polar regions are too cold and dark to be viable options for landing. And NASA hopes that future human missions will be able to rely on what they call “in-situ resource utilization”, meaning relying on the resources in a given area.
The new map was created by combining data from two long-running Martian spacecraft: NASA’s Mars Reconnaissance Orbiter and Mars Odyssey. Each orbiter used onboard heat-sensitive instruments to detect the ice since buried ice changes the temperature of the surface. To corroborate their findings, the scientists cross-referenced their work with other data — like ice seen in radar instruments and Mars Odyssey’s gamma-ray spectrometer, a tool designed to spotting water ice deposits.
Water is a precious commodity and thanks to this new data, NASA is hoping that future missions can land near Arcadia Planitia and use its resources instead of having to travel to the poles and hauling water back.
The agency hopes that this map will also identify other promising areas. See it’s not just water that the map is locating, it’s also other valuable resources. When broken down into its components (hydrogen and oxygen), astronauts could not only get water to drink, but could also make rocket fuel, thus decreasing the load they would need to haul from Earth.
SpaceX has achieved an incredible milestone by launching its 11,000th Starlink satellite into orbit.
This accomplishment occurred during the Starlink Group 17-50 mission, which lifted off on August 19 at 04:01 UTC from Space Launch Complex 4 East at Vandenberg Space Force Base in California.
Falcon 9 launches 24 @Starlink satellites from California pic.twitter.com/UscpmAxDls
— SpaceX (@SpaceX) August 19, 2026
A Falcon 9 rocket carried 24 Starlink V2 Mini satellites on this flight, successfully deploying them into low Earth orbit approximately one hour after liftoff. The first stage booster, identified as B1097 on its twelfth flight, landed successfully on the droneship Of Course I Still Love You in the Pacific Ocean.
According to tracking data compiled around that date, this deployment brought the total number of Starlink satellites in orbit to just over 11,000.
The Starlink program began with test satellites known as Tintin A and B, launched on February 22, 2018. The first operational batch of 60 Starlink satellites followed on May 24, 2019, when a Falcon 9 rocket lifted off from Cape Canaveral. Those initial satellites marked the start of a rapid expansion that has continued for more than seven years.
SpaceX has conducted hundreds of dedicated Starlink missions since then, routinely launching batches of 20 to 30 satellites at a time using reusable Falcon 9 rockets. By mid-2026, the company had already surpassed 12,000 total satellites launched across all versions, with continuous replacements for units that deorbit as designed to manage space debris.
Looking ahead, SpaceX continues to expand the Starlink constellation to enhance global broadband coverage, capacity, and speed. The network already serves millions of users across more than 160 countries and supports applications ranging from residential internet to maritime, aviation, and emergency services.
Future plans center on next-generation hardware, including larger V3 satellites capable of delivering substantially higher throughput, which require the increased payload capacity of the Starship vehicle currently under development and testing.
In July, SpaceX submitted an application to the Federal Communications Commission seeking authority for a Gen3 constellation of up to 100,000 satellites. These spacecraft would operate in very low Earth orbit shells at altitudes near 325 kilometers and 475 kilometers. The filing requests use of existing Ku, Ka, V, and E band spectrum along with new greenfield W and D band frequencies between 92 and 275 GHz.
SpaceX states that the expanded system aims to deliver multi-gigabit symmetrical broadband to consumers, enterprises, governments, and billions of AI-powered devices worldwide while handling a majority of global internet traffic. Approval and subsequent deployment would depend on regulatory review and the operational readiness of Starship for high-volume launches.
This ambitious scale reflects SpaceX’s ongoing commitment to providing ubiquitous high-speed connectivity from space.
News
SpaceX just launched a secret payload from California
SpaceX launched a classified Space Force mission from Vandenberg, revealing almost nothing about its payload.
SpaceX launched a classified Falcon 9 mission for the U.S. Space Force from Vandenberg Space Force Base on Saturday night, and the government released almost nothing about what was on board. The mission, designated USSF-366, lifted off from Space Launch Complex 4E with a window that opened at 9:52 p.m. ET and ran into the early hours of Sunday, according to SpaceX’s own mission page, which described the payload only as classified. SpaceX confirmed the launch on its X account and pointed viewers to a livestream that began roughly ten minutes before liftoff.
Watch Falcon 9 launch the USSF-366 mission from pad 4E in California https://t.co/FFEzeYOds1
— SpaceX (@SpaceX) August 16, 2026
The lack of detail did not stop analysts from filling in the blanks. Independent tracking of the rocket’s stage drop zones matched the pattern SpaceX has used on previous Starlink Group 15 missions, according to reporting from Outer Space Today, which pointed to Starshield as the likely payload rather than a one off government satellite. Starshield is SpaceX’s national security product, a version of the Starlink satellite bus built to Pentagon specifications for earth observation, communications and hosted payloads. Unlike consumer Starlink, government agencies do not have to disclose what Starshield satellites are actually doing once they reach orbit.
USSF-366 is the latest entry in a steady flow of classified and semi classified work between SpaceX and the Space Force. The company picked up a $178.5 million task order in April to launch missile tracking satellites for the Space Development Agency, as Teslarati reported at the time, and followed that in July with a $1.6 billion award covering 18 more Falcon 9 missions from Vandenberg through the end of 2027, also detailed by Teslarati. Add those contracts up and SpaceX’s Pentagon business for 2026 alone tops $8 billion.
SpaceX scores another massive Pentagon deal to support military satellites
The Falcon 9 that flew Saturday landed back near the launch site, producing the sonic booms that have become routine for residents near Vandenberg. What is less routine is how little the public will likely ever learn about what the rocket carried. SpaceX and the Space Force have not confirmed the Starshield connection, and government satellite programs built on commercial buses rarely get identified beyond a mission number and a general orbit. For a company that live streams almost everything else it does, from Starship test flights to Optimus robot demos, USSF-366 is a reminder that some of SpaceX’s busiest work now happens entirely out of public view.
Elon Musk has declared that SpaceX has effectively solved one of Starship’s most persistent engineering challenges: the reliability of its heat shield tiles.
During the company’s first-ever Earnings Call, the SpaceX CEO stated:
“I don’t want to jinx it or anything, but I think I would call the heat shield problem solved at this point. All indications from data and visual inspection is we have solved it. That doesn’t mean we won’t make improvements, but we do not see any technical obstacles to achieving rapid reusability at this point.”
Starship’s heat shield consists of roughly 18,000 hexagonal ceramic tiles covering the windward side of the upper stage. These tiles form the thermal protection system that shields the vehicle’s stainless-steel structure from the extreme heat of atmospheric reentry.
Elon says he believes the heat shield problem with Starship is currently solved.
He called it “arguably the single biggest problem” pic.twitter.com/eEE9vM5zlz
— TESLARATI (@Teslarati) August 4, 2026
During descent, atmospheric friction generates temperatures exceeding several thousand degrees Celsius and creates plasma flows capable of melting unprotected metal. The tiles absorb, radiate, and insulate against this energy, allowing the vehicle to survive and potentially fly again. Without a durable heat shield, full and rapid reusability, the cornerstone of Starship’s design for frequent launches, satellite deployments, and deep-space missions, would remain impossible.
The tiles have long been a source of difficulty. On earlier test flights, a significant number of tiles detached during ascent due to vibration, aerodynamic loads, and imperfect attachment methods using pins and adhesives. Gaps between tiles allowed hot plasma to infiltrate, causing secondary damage and hot spots on the underlying structure.
These issues echoed challenges faced by NASA’s Space Shuttle, whose ceramic tiles required extensive, labor-intensive inspections and replacements between missions, preventing rapid turnaround. SpaceX has iteratively improved materials, standardized tile shapes, refined attachment techniques, added secondary ablative layers, and tested sealing methods such as “crunch wrap” felt to close gaps.
Progress was visible across Flights 10–12, with steadily better tile retention, yet questions remained about whether the system could support the minimal-refurbishment goal of rapid reuse.
Flight 13 on July 24 provided the decisive evidence. Ship 40 flew a deliberately more demanding profile with higher dynamic pressure to stress the heat shield beyond typical operational loads. It successfully deployed 20 operational Starlink V3 satellites, the first such payload on a Starship mission, performed an in-space Raptor engine relight, and executed a controlled reentry.
Elon Musk sheds two new bits of detail on Starship after 13th test launch
Cameras on six of the satellites and onboard sensors captured extensive imagery and data of the shield throughout the flight. The ship then achieved its softest splashdown to date in the Indian Ocean, remaining intact and floating rather than breaking apart or exploding as on prior missions. This allowed drone inspections and continuous telemetry of the heat shield in near-real time.
Post-flight analysis showed the majority of tiles remaining attached with only minor damage and limited plasma streaking at seams. Musk noted that the mission delivered “all the heat shield data we needed and then some.” Combined with visual inspections, these results underpinned his subsequent assessment that the core technical barriers to rapid reusability have been cleared. While refinements will continue, Flight 13 marked a pivotal step toward Starship’s operational future.
SpaceX achieves incredible milestone with Starlink program
Tesla is opening Cybercab rides to a select few
