News
SpaceX's Elon Musk says Starlink user antennas will be like "UFOs on a stick"
SpaceX CEO Elon Musk has teased the first detailed description of the Starlink antennas (“user terminals”) customers will need to connect to the massive satellite internet constellation, revealing a few new and unexpected details about the critical hardware.
Although nearly all public focus is currently (and understandably) on the production and launch of Starlink satellites themselves, that perspective actually glosses over a second element of the constellation that is at least as important. Starlink, after all, is designed to delivered high-speed, low-latency broadband internet to customers around the world, and that service will not just magically appear in the houses of interested consumers. Similar to satellite TV, customers will gain access to their Starlink internet service with an antenna that will have to be installed somewhere on or around the premises.
The challenge that SpaceX faces with the grounded side of Starlink is that – unlike the geostationary satellites that provide satellite TV – satellites in low Earth orbit (LEO) are visible from a specific point on the ground for just a handful of minutes each. Whereas satellite TV dishes simply need to be pointed at one unmoving spot in the sky, Starlink ground antennas will need to constantly change where they are pointed (or at least track constantly-moving and changing satellites) and do so seamlessly and with incredible reliability.
A step further and even more importantly, while SpaceX unequivocally needs to make its Starlink user terminals extremely capable, simple, and reliable, it will also need to find a way to mass-produce millions (ultimately tens to hundreds of millions) of units and keep the cost to consumers unprecedentedly low. At least before Musk’s January 7th, 2020 comment, it was believed that Starlink user terminals would have to rely almost entirely on high-performance phased-array antennas, referring to antennas that are steered electronically – i.e. without physically moving.
100% phased-array steering would likely result in the best possible user terminal from the standpoint of reliability and performance. However, full phased-array antennas – while making rapid progress – are still extremely expensive to manufacture compared to more basic alternatives, meaning that it could be an immense challenge – possibly much harder than building and launching Starlink satellites themselves – to mass-produce affordable user terminals under that paradigm. It’s possible that SpaceX has actually come to the same conclusion and is choosing to compromise with its first-generation user terminals, prioritizing time to market and cost per unit at the expense of peak performance and optimal reliability.
Competitor OneWeb may actually have a step up on SpaceX on that front, having reportedly already made great progress developing an exceptionally cheap flat-panel phased-array antenna capable of at least decent throughput (10-50 Mbps). On January 7th, Musk revealed that the current iteration of Starlink user terminals look like a “thin, flat, round UFO on a stick” and features “motors to self-adjust [and ensure it’s at the] optimal angle to view [the] sky.”
The latter tidbit came as a bit of a surprise, given that nearly all cutting-edge phased-array antennas in development feature flat-panel designs and mounting hardware and pointedly avoid mechanical steering – one of the great benefits of phased arrays. It’s ultimately unclear what purpose a mechanical pointing motor would serve on a Starlink user terminal. If the terminal is centered around a true phased-array antenna, mechanical steering would be an almost vestigial addition. However, it’s possible that SpaceX has found a way to hybridize electronic (phased-array) and mechanical steering to produce user terminals that are exceptionally cheap and high-performance at the cost of a reliability risk (moving parts).
Ultimately, it looks like we will find out much sooner than later how exactly SpaceX’s Starlink user terminals work, among other details. Musk says that Starlink will be able to start serving customers in Canada and the Northern US with as few as four additional Starlink launches, meaning that some form of beta test could begin after Starlink V1 L6.
As of now, SpaceX has 1-2 more Starlink missions scheduled to launch later this month. If SpaceX averages two launches per month, Starlink could be serving its first customers as early as March or April 2020.
Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.
Elon Musk
Delaware Supreme Court reinstates Elon Musk’s 2018 Tesla CEO pay package
The unanimous decision criticized the prior total rescission as “improper and inequitable,” arguing that it left Musk uncompensated for six years of transformative leadership at Tesla.
The Delaware Supreme Court has overturned a lower court ruling, reinstating Elon Musk’s 2018 compensation package originally valued at $56 billion but now worth approximately $139 billion due to Tesla’s soaring stock price.
The unanimous decision criticized the prior total rescission as “improper and inequitable,” arguing that it left Musk uncompensated for six years of transformative leadership at Tesla. Musk quickly celebrated the outcome on X, stating that he felt “vindicated.” He also shared his gratitude to TSLA shareholders.
Delaware Supreme Court makes a decision
In a 49-page ruling Friday, the Delaware Supreme Court reversed Chancellor Kathaleen McCormick’s 2024 decision that voided the 2018 package over alleged board conflicts and inadequate shareholder disclosures. The high court acknowledged varying views on liability but agreed rescission was excessive, stating it “leaves Musk uncompensated for his time and efforts over a period of six years.”
The 2018 plan granted Musk options on about 304 million shares upon hitting aggressive milestones, all of which were achieved ahead of time. Shareholders overwhelmingly approved it initially in 2018 and ratified it once again in 2024 after the Delaware lower court struck it down. The case against Musk’s 2018 pay package was filed by plaintiff Richard Tornetta, who held just nine shares when the compensation plan was approved.
A hard-fought victory
As noted in a Reuters report, Tesla’s win avoids a potential $26 billion earnings hit from replacing the award at current prices. Tesla, now Texas-incorporated, had hedged with interim plans, including a November 2025 shareholder-approved package potentially worth $878 billion tied to Robotaxi and Optimus goals and other extremely aggressive operational milestones.
The saga surrounding Elon Musk’s 2018 pay package ultimately damaged Delaware’s corporate appeal, prompting a number of high-profile firms, such as Dropbox, Roblox, Trade Desk, and Coinbase, to follow Tesla’s exodus out of the state. What added more fuel to the issue was the fact that Tornetta’s legal team, following the lower court’s 2024 decision, demanded a fee request of more than $5.1 billion worth of TSLA stock, which was equal to an hourly rate of over $200,000.
Delaware Supreme Court Elon Musk 2018 Pay Package by Simon Alvarez
News
Tesla Cybercab tests are going on overdrive with production-ready units
Tesla is ramping its real-world tests of the Cybercab, with multiple sightings of the vehicle being reported across social media this week.
Tesla is ramping its real-world tests of the Cybercab, with multiple sightings of the autonomous two-seater being reported across social media this week. Based on videos of the vehicle that have been shared online, it appears that Cybercab tests are underway across multiple states.
Recent Cybercab sightings
Reports of Cybercab tests have ramped this week, with a vehicle that looked like a production-ready prototype being spotted at Apple’s Visitor Center in California. The vehicle in this sighting was interesting as it was equipped with a steering wheel. The vehicle also featured some changes to the design of its brake lights.
The Cybercab was also filmed testing at the Fremont factory’s test track, which also seemed to involve a vehicle that looked production-ready. This also seemed to be the case for a Cybercab that was spotted in Austin, Texas, which happened to be undergoing real-world tests. Overall, these sightings suggest that Cybercab testing is fully underway, and the vehicle is really moving towards production.
Production design all but finalized?
Recently, a near-production-ready Cybercab was showcased at Tesla’s Santana Row showroom in San Jose. The vehicle was equipped with frameless windows, dual windshield wipers, powered butterfly door struts, an extended front splitter, an updated lightbar, new wheel covers, and a license plate bracket. Interior updates include redesigned dash/door panels, refined seats with center cupholders, updated carpet, and what appeared to be improved legroom.
There seems to be a pretty good chance that the Cybercab’s design has been all but finalized, at least considering Elon Musk’s comments at the 2025 Annual Shareholder Meeting. During the event, Musk confirmed that the vehicle will enter production around April 2026, and its production targets will be quite ambitious.
News
Tesla gets a win in Sweden as union withdraws potentially “illegal” blockade
As per recent reports, the Vision union’s planned anti-Tesla action might have been illegal.
Swedish union Vision has withdrawn its sympathy blockade against Tesla’s planned service center and showroom in Kalmar. As per recent reports, the Vision union’s planned anti-Tesla action might have been illegal.
Vision’s decision to pull the blockade
Vision announced the blockade in early December, stating that it was targeting the administrative handling of Tesla’s facility permits in Kalmar municipality. The sympathy measure was expected to start Monday, but was formally withdrawn via documents sent to the Mediation Institute and Kalmar Municipality last week.
As noted in a Daggers Arbete report, plans for the strike were ultimately pulled after employer group SKR highlighted potential illegality under the Public Employment Act. Vision stressed its continued backing for the Swedish labor model, though Deputy negotiation manager Oskar Pettersson explained that the Vision union and IF Metall made the decision to cancel the planned strike together.
“We will not continue to challenge the regulations,” Petterson said. “The objection was of a technical nature. We made the assessment together with IF Metall that we were not in a position to challenge the legal assessment of whether we could take this particular action against Tesla. Therefore, we chose to revoke the notice itself.”
The SKR’s warning
Petterson also stated that SKR’s technical objection to the Vision union’s planned anti-Tesla strike framed the protest as an unauthorized act. “It was a legal assessment of the situation. Both for us and for IF Metall, it is important to be clear that we stand for the Swedish model. But we should not continue to challenge the regulations and risk getting judgments that lead nowhere in the application of the regulations,” he said.
Vision ultimately canceled its planned blockade against Tesla on December 9. With Vision’s withdrawal, few obstacles remain for Tesla’s long-planned Kalmar site. A foreign electrical firm completed work this fall, and Tesla’s Careers page currently lists a full-time service manager position based there, signaling an imminent opening.
Delaware Supreme Court reinstates Elon Musk’s 2018 Tesla CEO pay package
Tesla Cybercab tests are going on overdrive with production-ready units
