Connect with us

News

Tesla Gigafactory Shanghai’s progress bodes well for Model Y production by end of 2020

(Credit: Jason Yang/YouTube)

Published

on

Recent flyovers of the Gigafactory Shanghai complex indicate that work on the Model Y factory is progressing at an incredibly quick manner. Built with a speed that seems to rival even that of the site’s Model 3 factory last year, the Model Y facility has evolved from a simple field with a few posts to a framework of a massive building in just a couple of months.

As could be seen in recent drone footage from Tesla enthusiast Jason Yang, Gigafactory Shanghai’s Phase 2A area, which has been confirmed as the Model Y factory in Tesla’s Q1 2020 Update Letter, is coming to form. Roof trusses have been laid on most of the building, and its metal framework seems pretty much completed. Considering the speed of the buildout so far, it would not be surprising if Tesla China starts paving the roof and floors of the facility within the coming month.

If one were to look at the current state of the Gigafactory Shanghai complex, one would see that it matches the progress of the Phase 1 building in late April 2019. Gigafactory Shanghai’s Model 3 facility was built in record time, and following a groundbreaking ceremony in January 2019, the building’s metal framework and roof trusses were nearly done by late April.

Following this, roof and floor paving were started, and by the end of May, the Model 3 facility’s factory shell was practically completed. Based on the current progress of the Model Y factory, it appears that Tesla China and its construction partners are progressing just as fast, if not faster, than the buildout of the Model 3 facility. This could bode very well for the production of the Made-in-China Model Y and its eventual release to the local market.

After the completion of Phase 1’s factory shell in late May 2019, it only took less than four months before trial assembly of the Model 3 began in the Phase 1 building. The first images of Made-in-China Model 3 trial units being assembled in Gigafactory Shanghai emerged in September 2019, and by October, photos of first production vehicles were being shared online. By the end of 2019, first deliveries of the locally-made Model 3 to Tesla China employees was conducted.

Advertisement

If the construction in the Phase 2A area matches the speed of the Model 3 factory, it would not be surprising if the Model Y facility starts rolling out trial units by the start of the fourth quarter. If Tesla China could accelerate its pace even further, then the idea of initial Model Y deliveries happening before the end of the year actually becomes quite feasible. The Model Y shares 75% of the Model 3’s parts, after all, and it is designed to be built with automation in mind. As it turns out, Tesla’s China team happens to excel in projects that are quick and efficient.

Watch a recent drone flyover of the Gigafactory Shanghai site in the video below.

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla might be doing away with a long-included feature with its vehicles

It appears Tesla is mulling the possibility of not including key cards with its vehicles any longer.

Published

on

Credit: Tesla

Tesla might be doing away with a long-included feature with its vehicles, as it could be looking to phase out something that very few owners utilize.

Tesla Key Cards are included when you purchase your vehicle, and they assist in the initial setup process. However, after that, they are not super useful or relevant to the owner, as many rely on their Phone Key through the Tesla App to access their cars.

As such, it appears Tesla is mulling the possibility of not including key cards with its vehicles any longer. According to some language that has been removed from vehicle Owner’s Manuals that talks about the inclusion of key cards with the car upon delivery:

“Tesla provides you with two Model 3/Y key cards, designed to fit in your wallet.”

That sentence was removed from Owner’s Manuals, according to Not a Tesla App, which first spotted the change.

Tesla Model 3 owner implants RFID key card chip into her arm as ultimate hack to unlock door

Interestingly, the timing of the phrase being removed from Owner’s Manuals comes just after Tesla launched its “affordable” Standard Models, and could be a small money-saving measure for the company.

Key Cards have been utilized by Tesla for its cars since 2017, as they became an included accessory with the vehicle. They still have their place and are useful for other applications, such as Valet service and even to be used by car owners if their phone is dead or if someone else needs to get into the car.

They can also be purchased in the Tesla Shop for $40.

It seems as if Tesla is planning to have owners be completely reliant on the Phone Key, which is more useful and convenient than carrying around the Key Cards.

Although it is minor, it is yet another strategy Tesla is using to trim any sort of costs that can be eliminated and could save money in the long run.

Continue Reading

News

Elon Musk confirms Tesla FSD V14.2 will see widespread rollout

Musk shared the news in a post on social media platform X.

Published

on

Credit: Whole Mars Catalog/X

Elon Musk has confirmed that Tesla will be implementing a wide rollout of Full Self-Driving (FSD) V14 with the system’s V14.2 update. Musk shared the news in a post on social media platform X. 

FSD V14.1.2 earns strong praise from testers

Musk’s comment came as a response to Tesla owner and longtime FSD tester AI DRIVR, who noted that it might be time to release Full Self-Driving to the fleet because V14.1.2 has already become very refined.

“95% of the indecisive lane changes and braking have been fixed in FSD 14.1.2. I haven’t touched my steering wheel in two days. I think it’s time, Tesla AI,” the longtime FSD tester wrote

AI DRIVR’s comment received quite a bit of support from fellow Tesla drivers, some of whom noted that the improvements that were implemented in V14.1.2 are substantial. Others also agreed that it’s time for FSD to see a wide release.

In his reply to the FSD tester, CEO Elon Musk noted that FSD V14’s wide release would happen with V14.2. “14.2 for widespread use,” Musk wrote in his reply

Advertisement

Mad Max mode makes headlines

One of the key features that was introduced with FSD’s current iteration is Mad Max mode, which allows for higher speeds and more frequent lane changes than the previous “Hurry” mode. Videos and social media posts from FSD testers have shown the system deftly handling complex traffic, merging seamlessly, and maintaining an assertive but safe driving behavior with Mad Max mode engaged.

Tesla AI head Ashok Elluswamy recently noted in a post on X that Mad Max mode was built to handle congested daytime traffic, making it extremely useful for drivers who tend to find themselves in heavy roads during their daily commutes. With Musk now hinting that FSD V14.2 will go on wide release, it might only be a matter of time before the larger Tesla fleet gets to experience the notable improvements of FSD’s V14 update.

Continue Reading

News

Multiple Tesla Cybercab units spotted at Giga Texas crash test facility

The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size.

Published

on

Credit: @JoeTegtmeyer/X

It appears that Tesla is ramping up its activities surrounding the development and likely initial production of the Cybercab at Giga Texas. This was, at least, hinted at in a recent drone flyover of the massive electric vehicle production facility in Austin. 

Cybercab sightings fuel speculations

As observed by longtime Giga Texas drone operator Joe Tegtmeyer, Tesla had several covered Cybercab units outside the facility’s crash testing facility at the time of his recent flyover. The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size. Tegtmeyer also observed during his flyover that production of the Model Y Standard seems to be hitting its pace.

The drone operator noted that the seven covered Cybercabs might be older prototypes being decommissioned or new units awaiting crash tests. Either scenario points to a ramp-up in Cybercab activity at Giga Texas, however. “In either case, this is another datapoint indicating production is getting closer to happening,” Tegtmeyer wrote on X, highlighting that the autonomous two-seaters were quite exciting to see.

Cybercab production targets

This latest sighting follows reports of renewed Cybercab appearances at both the Fremont Factory and Giga Texas. A test unit was recently spotted driving on Giga Texas’ South River Road. Another Cybercab, seen at Tesla’s Fremont Factory, appeared to be manually driven, suggesting that the vehicle’s current prototypes may still be produced with temporary steering controls.

The Tesla Cybercab is designed to be the company’s highest-volume vehicle, with CEO Elon Musk estimating that the autonomous two-seater should see an annual production rate of about 2 million units per year. To accomplish this, Tesla will be building the Cybercab using its “Unboxed” process, which should help the vehicle’s production line achieve outputs that are more akin to consumer electronics production lines.

Advertisement
Continue Reading

Trending