Connect with us

News

SpaceX has a California launch date for the first time in 16 months

The Sentinel 6A spacecraft has officially been completed and will soon ship to California for what will be SpaceX's first West Coast launch in more than 16 months. (D. Stamos/Twitter)

Published

on

Just over a week after a Falcon 9 booster was spotted heading west, NASA has confirmed the date for SpaceX’s first California launch in more than 16 months.

Spotted in Texas on August 20th, Arizona on August 23rd, and at the entrance to Vandenberg Air Force Base (VAFB) on August 24th, the SpaceX rocket is almost certainly Falcon 9 booster B1063 or B1064. Regardless, it – alongside an expendable upper stage and (likely also expendable) payload fairing – will be flying for the first time on a fairly unique mission cosponsored by NASA.

Known as Sentinel-6A or Sentinel-6 Michael Freilich, after the late scientist and NASA director responsible for bringing several major Earth science missions to fruition, the 1500 kg (3300 lb) Airbus-built satellite is designed to measure ocean height and analyze the Earth’s atmosphere almost anywhere on Earth.

Built by Airbus, the Sentinel 6A spacecraft has been officially completed and will be ready to head to California in September or October. (Airbus)

As previously discussed on Teslarati, the SpaceX booster spotted heading west late last month was almost certainly meant for Sentinel-6A.

NASA awarded SpaceX the $97 million launch contract in 2017, all but guaranteeing that Sentinel 6A will fly on a brand new Falcon 9 booster. The fact that the booster spotted in transport over the last week was never seen East of Texas strongly implies that it’s a new Falcon 9 SpaceX tested in McGregor before shipping back to California, in which case Sentinel 6A is almost certainly SpaceX’s next VAFB launch.

In the likely event that the booster that arrived at VAFB on August 24th is unflown, it’s probably Falcon 9 B1063. Germany’s SARah-1 radar imaging satellite is possibly the only other West Coast launch on SpaceX’s manifest that could warrant sending a new booster to California, but recent signs point towards that ~2200 kg (4850 lb) spacecraft launching in Q1 2021 (a delay from Q4 2020) as part of a dedicated SpaceX rideshare mission.

Less likely, SARah-1 could have been manifested on SpaceX’s first dedicated rideshare mission, scheduled to launch in December 2020. Either way, as fairly complex and expensive one-off science spacecraft, both SARah-1 and Sentinel 6A are liable to slip right from their current launch targets, meaning that Falcon 9 B1063 will likely spend at least 2-3 months in storage between now and the start of its first launch flow.


Teslarati.com — August 25th, 2020

Now, just three days after SpaceX successfully completed the first East Coast polar launch in half a century, NASA has already unexpectedly revealed that SpaceX’s first dedicated rideshare mission – mentioned above and now deemed Transporter-1 – is still on track to launch in December 2020. However, SpaceX has moved the launch from California to Florida, killing the possibility that the new booster now at SpaceX’s Vandenberg launch facilities was meant for SARah-1.

Advertisement
B1063 (presumed) bakes in the 110°F+ desert heat in Scottsdale, Arizona. (D. Stamos – Twitter)

The very next day, NASA’s Launch Services Program (LSP) office revealed that Sentinel-6A is officially targeting an 11:45am PDT (UTC-7), November 10th, 2020 launch on Falcon 9. Aside from giving SpaceX its first firm Vandenberg Air Force Base (VAFB) launch date since June 2019, the NASA update also revealed that the mission hasn’t slipped a single day after more than two months of reviews.

B1063 (presumed) likely completed its McGregor, Texas acceptance testing sometime in late-July before shipping back to California a few weeks later.

Due to the fact both of SpaceX’s operational drone ships are currently stationed in Florida, Sentinel-6A will include a guaranteed Falcon 9 booster landing back at Landing Zone-4, situated just a thousand feet or so away from the SLC-4E launch pad.

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Elon Musk confirms Tesla FSD V14.2 will see widespread rollout

Musk shared the news in a post on social media platform X.

Published

on

Credit: Whole Mars Catalog/X

Elon Musk has confirmed that Tesla will be implementing a wide rollout of Full Self-Driving (FSD) V14 with the system’s V14.2 update. Musk shared the news in a post on social media platform X. 

FSD V14.1.2 earns strong praise from testers

Musk’s comment came as a response to Tesla owner and longtime FSD tester AI DRIVR, who noted that it might be time to release Full Self-Driving to the fleet because V14.1.2 has already become very refined.

“95% of the indecisive lane changes and braking have been fixed in FSD 14.1.2. I haven’t touched my steering wheel in two days. I think it’s time, Tesla AI,” the longtime FSD tester wrote

AI DRIVR’s comment received quite a bit of support from fellow Tesla drivers, some of whom noted that the improvements that were implemented in V14.1.2 are substantial. Others also agreed that it’s time for FSD to see a wide release.

In his reply to the FSD tester, CEO Elon Musk noted that FSD V14’s wide release would happen with V14.2. “14.2 for widespread use,” Musk wrote in his reply

Advertisement

Mad Max mode makes headlines

One of the key features that was introduced with FSD’s current iteration is Mad Max mode, which allows for higher speeds and more frequent lane changes than the previous “Hurry” mode. Videos and social media posts from FSD testers have shown the system deftly handling complex traffic, merging seamlessly, and maintaining an assertive but safe driving behavior with Mad Max mode engaged.

Tesla AI head Ashok Elluswamy recently noted in a post on X that Mad Max mode was built to handle congested daytime traffic, making it extremely useful for drivers who tend to find themselves in heavy roads during their daily commutes. With Musk now hinting that FSD V14.2 will go on wide release, it might only be a matter of time before the larger Tesla fleet gets to experience the notable improvements of FSD’s V14 update.

Continue Reading

News

Multiple Tesla Cybercab units spotted at Giga Texas crash test facility

The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size.

Published

on

Credit: @JoeTegtmeyer/X

It appears that Tesla is ramping up its activities surrounding the development and likely initial production of the Cybercab at Giga Texas. This was, at least, hinted at in a recent drone flyover of the massive electric vehicle production facility in Austin. 

Cybercab sightings fuel speculations

As observed by longtime Giga Texas drone operator Joe Tegtmeyer, Tesla had several covered Cybercab units outside the facility’s crash testing facility at the time of his recent flyover. The vehicles were covered, but one could easily recognize the Cybercab’s sleek lines and compact size. Tegtmeyer also observed during his flyover that production of the Model Y Standard seems to be hitting its pace.

The drone operator noted that the seven covered Cybercabs might be older prototypes being decommissioned or new units awaiting crash tests. Either scenario points to a ramp-up in Cybercab activity at Giga Texas, however. “In either case, this is another datapoint indicating production is getting closer to happening,” Tegtmeyer wrote on X, highlighting that the autonomous two-seaters were quite exciting to see.

Cybercab production targets

This latest sighting follows reports of renewed Cybercab appearances at both the Fremont Factory and Giga Texas. A test unit was recently spotted driving on Giga Texas’ South River Road. Another Cybercab, seen at Tesla’s Fremont Factory, appeared to be manually driven, suggesting that the vehicle’s current prototypes may still be produced with temporary steering controls.

The Tesla Cybercab is designed to be the company’s highest-volume vehicle, with CEO Elon Musk estimating that the autonomous two-seater should see an annual production rate of about 2 million units per year. To accomplish this, Tesla will be building the Cybercab using its “Unboxed” process, which should help the vehicle’s production line achieve outputs that are more akin to consumer electronics production lines.

Advertisement
Continue Reading

Elon Musk

Teslas in the Boring Co. Vegas Loop are about to get a big change

Elon Musk has a big update for Teslas that operate within the Boring Company’s Vegas Loop.

Published

on

the boring company's vegas loop entrance
(Credit: Sam Morris, LVCVA/Las Vegas News Bureau)

Tesla vehicles operating in the Boring Company’s Vegas Loop are about to get a big change, CEO Elon Musk said.

In Las Vegas, the Boring Company operates the Vegas Loop, an underground tunnel system that uses Teslas to drop people off at various hotspots on the strip. It’s been active for a few years now and is expanding to other resorts, hotels, and destinations.

Currently, there are stops at three resorts: Westgate, the Encore, and Resorts World. However, there will eventually be “over 100 stations and span over 68 miles of tunnel,” the Vegas Loop website says.

The Loop utilizes Tesla Model 3 and Model Y vehicles to send passengers to their desired destinations. They are currently driven using the Full Self-Driving suite, but they also have safety drivers in each vehicle to ensure safety.

Tesla Cybertruck rides are crucial for Vegas Loop expansion to airport

Tesla and the Boring Company have been working to remove drivers from the vehicles used in the Loop, but now, it appears there is a set timeline to have them out, according to CEO Elon Musk:

Musk says the Boring Co. will no longer rely on safety drivers within the Teslas for operation. Instead, Tesla will look to remove the safety drivers from the cars within the next month or two, a similar timeline for what Musk believes the Robotaxi platform will look like in Austin.

In Texas, as Robotaxi continues to operate as it has since June, there are still safety monitors within the car who sit in the passenger’s seat. They are there to ensure a safe experience for riders.

When the route takes the vehicle on the highway, safety monitors move into the driver’s seat.

However, Tesla wants to be able to remove safety monitors from its vehicles in Austin by the end of the year, Musk has said recently.

In early September, Musk said that the safety monitors are “just there for the first few months to be extra safe.” He then added that there “should be no safety driver by end of year.”

Continue Reading

Trending