Connect with us

News

Tesla Gigafactory Shanghai’s lots fills with Model 3 as Q3 production ramp commences

(Credit: Wuwa Vision/YouTube)

Published

on

The second phase of Tesla’s Gigafactory Shanghai may have caught most of the EV community’s attention recently due to its rapid completion, but the activities in the Phase 1 facility, which produces the Model 3, are nothing to scoff at, either. As could be seen in a recent flyover of the China-based factory, Tesla appears to be ramping the production of the Model 3 sedan to a significant degree, resulting in large numbers of vehicles being spotted on the site. 

Aerial footage from Tesla enthusiast and drone operator Wuwa Vision suggests that Gigafactory Shanghai is currently ramping its output. A flyover on September 10, for example, showed large numbers of Model 3 filling up the facility’s parking areas. Car carriers in the complex were also abounding, picking up and transporting Model 3 from Giga Shanghai to Tesla’s local delivery centers. 

https://twitter.com/bentv_sh/status/1304099579017658368?s=20

What is rather interesting is that the Model 3 factory in Gigafactory Shanghai does not seem to be fully ramped yet. Tesla’s Q2 2020 Update Letter noted that the China-based plant had a run-rate of 200,000 Model 3 per year, and that was with the facility reportedly operating with only two working shifts. Once the Model 3 factory in Giga Shanghai fully ramps up, the facility output would likely reach even more impressive numbers. 

The following months would likely be pivotal for Tesla’s push into China, especially considering that the electric car maker has all but completed its Model Y factory this quarter. With this milestone achieved, it would not be surprising if the following months would see trial production runs of the all-electric crossover. Giga Shanghai witnessed a similar ramp last year, when images of working production lines for the Model 3 started making their rounds online during the third quarter. 

Despite the Model 3 still competing in China’s premium segment, the all-electric sedan has managed to find a lot of footing in the country’s auto market. The Tesla Model 3 currently stands as one of China’s best-selling all-electric cars, performing very well despite being higher-priced than many of its competitors. Part of this is due to the Model 3’s bang-for-your-buck nature, as exhibited by its tech, features, safety, and performance. 

Gigafactory Shanghai will likely be one of Tesla’s key facilities this year, especially considering the electric car maker’s target of delivering 500,000 vehicles this year. Such a target is incredibly challenging due to the pandemic, which shut down the Fremont Factory for several weeks in the second quarter. But with the Fremont plant undergoing its Model Y ramp this third quarter and Giga Shanghai seemingly increasing its Model 3 output, Tesla may have a pretty good chance of pleasantly surprising the EV community this year. 

Watch a recent drone flyover of Gigafactory Shanghai in the video below. 

Advertisement
-
-
https://youtu.be/0OMhQIH7KG0

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla Summer Update begins rolling out: a look at the new features

Published

on

Credit: Tesla

Tesla has started to deploy the 2026 Summer Update to owners across its fleet, and among the biggest changes are improvements to Navigation, a new startup animation for the Model 3 and Model Y, Caraoke scoring, and new capabilities for Grok.

As the update has started making its way to some cars, we can now see a few of the features operating in real-time. We will show you what some of the new features look like in this article, along with some additional details on what changed.

Not all of the new features in the 2026 Summer Update have quite made an appearance, but some of them have, so we’ll show those here:

New Animation Screen for 3/Y

Tesla is rolling out a new startup animation for Tesla Model 3 and Model Y owners. This is present in Launch Edition and Performance Model 3 and Model Y, but other trim levels do not have anything like this.

Owners can adjust the color associated with the startup animation to suit their preferences. It is a surprise that more automakers do not focus on this animation for their vehicles; it can be a great first impression piece and make the car immediately feel more luxurious.

Tesla has included this on more premium trims, but it is nice to see it on the Model 3 and Model Y.

Grok Improvements

Grok can now adjust more things in the car outside of the Navigation system. Now, drivers can adjust anything from climate to driving settings by simply speaking to the AI assistant in the car:

You don’t even have to push a button, either. Instead, you can just say “Hey, Grok,” if you have it enabled. That feature rolled out with the 2026 Spring Update just a few months back.

This is a great feature, especially pertinent for the Robotaxi platform, as there will be no buttons inside the Cybercab when it eventually starts giving rides to the public. It also broadens Grok’s capabilities, which were relatively limited in terms of vehicle setting adjustments beforehand.

Continue Reading

News

Tesla briefly offered this Robotaxi part for your personal car

Published

on

Credit: @tpgoebel | X

Tesla briefly offered one Robotaxi part in its Parts Catalog for your personal car, only to remove it just a short time after it was first noticed.

Tesla’s Robotaxi camera washer apparatus was briefly available for purchase on the company’s Online Parts Catalog. The camera washer was first noticed on Model Y Robotaxi vehicles about six months ago in Austin.

First noticed by Not a Tesla App, the Camera Washer entries appeared for the new “Juniper” Model Y under a category called “Halo,” which has also now disappeared. Interestingly, Halo probably is related to Tesla’s internal “Project Halo,” which was a project that aimed to retrofit customer-owned Model Ys into functional Robotaxis.

This hardware addition would likely be required for the vehicle to operate as a Robotaxi, as the Camera Washer seems to be a non-negotiable part of the vision-based system Tesla utilizes for self-driving efforts.

However, this part has since been removed and is no longer visible on the EPC.

Now the true question lingers: Why would Tesla add this Camera Washer to the Model Y parts catalog? Is it planning to make it available for owners to utilize on their own cars for personal use, or will it become a prerequisite for Robotaxi operation in customer-owned cars?

While discussing the upgrade options for Hardware 3 vehicles during the Q1 Earnings Call, Tesla CEO Elon Musk had said that the company could establish small, satellite shops that would upgrade cameras and self-driving computers. Perhaps this same strategy could be utilized for vehicles that want to be included in Robotaxi but do not have the correct hardware.

AI4 is currently represented as capable of unsupervised self-driving, and the same was said about HW3 at one point, only for Tesla to admit last quarter that it would, unfortunately, not be possible. Perhaps AI4 vehicles might need this camera washer as a prerequisite, just as HW3 cars will need that camera and computer upgrade.

This could be the first hint of that’s where we are headed.

Continue Reading

News

Tesla Robotaxi gets sweeping but polarizing change

Published

on

Credit: Tesla

Tesla has started rolling out a broader change to the ride experience for its Robotaxi fleet by silencing turn signals, but the change is certainly polarizing.

Tesla has generally made it clear that its purpose-built ride-hailing platform, Robotaxi, will cater to the rider in nearly every way possible. This includes having climate preferences, music, and other personal settings loaded up in the car as the rider enters.

But Tesla is taking it a step further by muting turn signal chimes altogether, a change that appears to be a way to make the ride more peaceful:

However, there are a handful of people who are not thrilled about this change. Turn signals are a conditioned part of the human mind for those who ride in a car regularly.

Taking a turn without one feels strange and odd, and not hearing it click while activated could set off some alarms for riders, who might use the noise as confirmation that other drivers know of their intention to turn.

Turn signal noises are still audible in customer cars, so if you use FSD in your personal vehicle, you will still hear the turn signal.

The move is certainly one that is unique, but not one that separates it from other ride-sharing services. In a normal car, the clicking sound confirms to the driver that the blinker is active. In a fully driverless Robotaxi, that feedback serves no purpose for passengers, other than peace of mind.

Continue Reading