Connect with us

News

SpaceX, NASA investigating parachute ‘lag’ during latest Dragon recovery

Crew-2's uninflated main chute is visible in the middle image. CRS-24 experienced similar chute behavior. (NASA)

Published

on

On February 2nd, NASA officials reported that a SpaceX Cargo Dragon spacecraft suffered a minor parachute anomaly during its most recent reentry, descent, and splashdown.

On January 23rd, SpaceX’s CRS-24 Cargo Dragon 2 vehicle departed the International Space Station for the second time in less than six months with about 2.2 tons (~5000 lb) of science experiments, equipment, and refuse in tow. On January 24th, the Dragon successfully deorbited, reentered Earth’s atmosphere, deployed parachutes, and splashed down off of Florida’s Gulf Coast, where a SpaceX team quickly recovered the spacecraft and loaded time-sensitive cargo onto a waiting helicopter. Oddly, in an attempt to save perhaps a quarter of a percent of the total cost of the mission, NASA offered zero live coverage and didn’t even publish photos or videos of the Dragon recovery taken after the fact.

That left little more than social media posts for taxpayers who paid for the mission to experience it live. Ultimately, while those posts simply stated that the CRS-24 Dragon recovery was a success, they weren’t entirely accurate.

Mirroring behavior seen on Crew Dragon’s Crew-2 recovery in November 2021, NASA and SpaceX waited more than a week after the fact to report that one of Cargo Dragon’s four main parachutes also failed to fully inflate exactly when expected. However, while NASA and SpaceX withholding information is unsavory at best, the issue was once again minor.

Advertisement
Crew-2’s partially uninflated main chute is visible in the middle photo. (NASA)

Just like Crew-2, the ‘lagging’ CRS-24 chute took about a minute longer than its siblings to fully inflate but did so well before splashdown. More importantly, CRS-24’s chute lag also failed to register in telemetry or recovered data, meaning that it had no significant impact on capsule descent rate or the force of impact upon splashdown. According to senior SpaceX flight reliability engineer Bill Gerstenmaier, “if you [only] look at the…data, you wouldn’t even detect the fact that the chutes [lagged on Crew-2 or CRS-24].”

In other words, the lagging chute inflation has been entirely harmless and completely inconsequential. Further, because Crew Dragon and Cargo Dragon 2 use four main chutes, they can safely return to Earth even if one of those chutes fails entirely. The fact that the actual telemetry shows nothing amiss with three – instead of – four chutes fully deployed effectively confirms as much, though SpaceX also completed more than a hundred different parachute drop tests verifying as much before Dragon 2’s first flight.

However, in human spaceflight, the saying “sometimes a cigar is just a cigar” could not be further from reality. Any deviation from expected behavior – no matter how harmless – must be carefully investigated because a lack of full understanding in one area may be a symptom of a larger organizational error or a sign of other unknown issues. Even if that’s rarely the case, NASA – where Gerstenmaier was an executive for 17 years – knows the cost of systemic complacency better than any other company or space agency on Earth. There is no room for it.

As such, even if the communication of the event was lacking, it’s abundantly clear that NASA and SpaceX are doing what needs to be done to remain vigilant and ensure the safety of Dragon and its parachutes.

Advertisement

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Tesla ships out update that brings massive change to two big features

“This change only updates the name of certain features and text in your vehicle,” the company wrote in Release Notes for the update, “and does not change the way your features behave.”

Published

on

Credit: Tesla

Tesla has shipped out an update for its vehicles that was caused specifically by a California lawsuit that threatened the company’s ability to sell cars because of how it named its driver assistance suite.

Tesla shipped out Software Update 2026.2.9 starting last week; we received it already, and it only brings a few minor changes, mostly related to how things are referenced.

“This change only updates the name of certain features and text in your vehicle,” the company wrote in Release Notes for the update, “and does not change the way your features behave.”

The following changes came to Tesla vehicles in the update:

  • Navigate on Autopilot has now been renamed to Navigate on Autosteer
  • FSD Computer has been renamed to AI Computer

Tesla faced a 30-day sales suspension in California after the state’s Department of Motor Vehicles stated the company had to come into compliance regarding the marketing of its automated driving features.

The agency confirmed on February 18 that it had taken a “corrective action” to resolve the issue. That corrective action was renaming certain parts of its ADAS.

Tesla discontinued its standalone Autopilot offering in January and ramped up the marketing of Full Self-Driving Supervised. Tesla had said on X that the issue with naming “was a ‘consumer protection’ order about the use of the term ‘Autopilot’ in a case where not one single customer came forward to say there’s a problem.”

It is now compliant with the wishes of the California DMV, and we’re all dealing with it now.

This was the first primary dispute over the terminology of Full Self-Driving, but it has undergone some scrutiny at the federal level, as some government officials have claimed the suite has “deceptive” names. Previous Transportation Secretary Pete Buttigieg was one of those federal-level employees who had an issue with the names “Autopilot” and “Full Self-Driving.”

Tesla sued the California DMV over the ruling last week.

Continue Reading

News

Tesla workers push back against Giga Berlin unionization

“IG Metall did not succeed in Giga Berlin‘s works council election earlier today. The union share was reduced from nearly 40% in 2024 to 31% in 2026! This is a clear message by the Giga Berlin team towards an independent co-determination! The list called Giga United, led by the current chairwoman, Michaela Schmitz, received the most votes with more than 40%! Good news for Giga Berlin!”

Published

on

Tesla workers pushed back against unionization efforts at Gigafactory Berlin, and over the past few years, there has been a dramatic decrease in interest to unionize at the German plant.

Gigafactory Berlin Plant Manager André Thierig announced on Wednesday that IG Metall, the European union group, saw its share reduce from 40 to 31 percent in 2026 as employees eligible to vote on the issue. Instead, the Giga Berlin team, known as Giga United, received the most votes with more than 40 percent.

Thierig gave specific details in a post on X:

“IG Metall did not succeed in Giga Berlin‘s works council election earlier today. The union share was reduced from nearly 40% in 2024 to 31% in 2026! This is a clear message by the Giga Berlin team towards an independent co-determination! The list called Giga United, led by the current chairwoman, Michaela Schmitz, received the most votes with more than 40%! Good news for Giga Berlin!”

There were over 10,700 total employees who were eligible to vote, with 87 percent of them turning out to cast what they wanted. There were three key outcomes: Giga United, IG Metall, and other notable groups, with the most popular being the Polish Initiative.

The 37-seat council remains dominated by non-unionized representatives, preserving Giga Berlin as Germany’s only major auto plant without a collective bargaining agreement.

Thierig and Tesla framed the outcome as employee support for an “independent, flexible, and unbureaucratic” future, enabling acceleration on projects like potential expansions or new models. IG Metall expressed disappointment, accusing management of intimidation tactics and an “unfair” campaign.

The first election of this nature happened back in 2022. In 2024, IG Metall emerged as the largest single faction with 39.4 percent, but non-union lists coalesced for a majority.

But this year was different. There was some extra tension at Giga Berlin this year, as just two weeks ago, an IG Metall rep was accused by Tesla of secretly recording a council meeting. The group countersued for defamation.

Tesla Giga Berlin plant manager faces defamation probe after IG Metall union complaint

This result from the 2026 vote reinforced Tesla’s model of direct employee-management alignment over traditional German union structures, amid ongoing debates about working conditions. IG Metall views it as a setback but continues advocacy. Tesla sees it as validation of its approach in a competitive EV market.

This outcome may influence future labor dynamics at Giga Berlin, including any revival of expansion plans or product lines, which Musk has talked about recently.

Continue Reading

News

SpaceX President Gwynne Shotwell details xAI power pledge at White House event

The commitment was announced during an event with United States President Donald Trump.

Published

on

xAI-supercomputer-memphis-environment-pushback
Credit: xAI

SpaceX President Gwynne Shotwell stated that xAI will develop 1.2 gigawatts of power at its Memphis-area AI supercomputer site as part of the White House’s new “Ratepayer Protection Pledge.” 

The commitment was announced during an event with United States President Donald Trump.

During the White House event, Shotwell stated that xAI’s AI data center near Memphis would include a major energy installation designed to support the facility’s power needs.

“As you know, xAI builds huge supercomputers and data centers and we build them fast. Currently, we’re building one on the Tennessee-Mississippi state line. As part of today’s commitment, we will take extensive additional steps to continue to reduce the costs of electricity for our neighbors… 

Advertisement

“xAI will therefore commit to develop 1.2 GW of power as our supercomputer’s primary power source. That will be for every additional data center as well. We will expand what is already the largest global Megapack power installation in the world,” Shotwell said.

She added that the system would provide significant backup power capacity.

“The installation will provide enough backup power to power the city of Memphis, and more than sufficient energy to power the town of Southaven, Mississippi where the data center resides. We will build new substations and invest in electrical infrastructure to provide stability to the area’s grid.”

Shotwell also noted that xAI will be supporting the area’s water supply as well. 

Advertisement

“We haven’t talked about it yet, but this is actually quite important. We will build state-of-the-art water recycling plants that will protect approximately 4.7 billion gallons of water from the Memphis aquifer each year. And we will employ thousands of American workers from around the city of Memphis on both sides of the TN-MS border,” she noted. 

The Ratepayer Protection Pledge was introduced as part of the federal government’s effort to address concerns about rising electricity costs tied to large AI data centers, as noted in an Insider report. Under the agreement, companies developing major AI infrastructure projects committed to covering their own power generation needs and avoiding additional costs for local ratepayers.

Continue Reading