Connect with us
aptera gamma aptera gamma

News

Aptera receives new $21 million grant as it nears production readiness

Credit: Aptera

Published

on

Aptera has received a new $21 million grant from the California Energy Commission to help it achieve production readiness.

As is the challenge for most EV startups, Aptera has been on a non-stop quest to secure capital to start production of its launch edition vehicle. The company’s co-founder, Chris Anthony, recently went to Switzerland to secure funding for the automaker. Now, Aptera has received money from a grant issued by the State of California.

The grant for $21 million was granted to Aptera to allow the fledgling automaker to achieve production at its California facilities. Furthermore, Aptera states that it will be moving more of its component manufacturing to the State in the coming years following initial production.

Co-CEO Chris Anthony states, “Working with the CEC enables us to produce grid-free, carbon-neutral solar mobility while creating new jobs for all Californians (targeting 10% in underserved communities). Our over-arching goal is to meet the demand for our solar electric vehicles to have real impact on climate change, sharing in CEC’s ultimate mission.”

This is not the only source of funding that Aptera hopes will get it across the finish line. Besides the aforementioned trip to the Swiss Alps, Aptera has launched its “Accelerator” program, the most significant push for public investment since its establishment. It encourages current reservation holders to put up $10,000 (or more) to secure one of the select launch edition vehicles produced in its first manufacturing round.

Advertisement

Besides this tireless financial work, Aptera engineers have also put in the hours behind the scenes. Just last week, Aptera revealed its “Zonal Architecture,” which helps limit the size and complexity of the vehicle’s wiring harness. Prior to that introduction, Aptera revealed its latest generation of the vehicle’s chassis and suspension. But most importantly, Aptera announced earlier this year that it had finally begun production tooling, which will make production possible.

The solar EV startup is not out of the woods yet and will need to continue to push for capital in the coming months. But if this recent grant is any indication of the faith people have in the project, there is no doubt that the company has the hopes of thousands of patient reservation holders behind them.

What do you think of the article? Do you have any comments, questions, or concerns? Shoot me an email at william@teslarati.com. You can also reach me on Twitter @WilliamWritin. If you have news tips, email us at tips@teslarati.com!

Will is an auto enthusiast, a gear head, and an EV enthusiast above all. From racing, to industry data, to the most advanced EV tech on earth, he now covers it at Teslarati.

Advertisement
Comments

Investor's Corner

Cantor Fitzgerald raises Tesla PT To $510, citing Cybercab, Semi, and AI momentum

The firm cited upcoming production milestones for the Cybercab, Semi, and Optimus as key drivers behind its revised valuation.

Published

on

Credit: Tesla Asia/X

Cantor Fitzgerald has boosted its Tesla (NASDAQ:TSLA) price target from $355 to $510 per share, maintaining an “Overweight” rating over its continued confidence in the company’s long-term growth. 

Analyst Andres Sheppard cited upcoming production milestones for the Cybercab, Semi, and Optimus as key drivers behind Cantor Fitzgerald’s revised valuation, as well as expanding opportunities in Tesla’s Energy and Full Self-Driving initiatives.

Major growth from multiple Tesla programs

According to Sheppard, Tesla disclosed that volume production for the Cybercab, Semi, and Megapack 3 is on track for fiscal year 2026, with Optimus production lines also targeted to launch next year. The analyst highlighted these updates as “significant,” noting that Tesla’s diverse roadmap continues to reinforce its position as a vertically integrated energy and AI company.

Cantor Fitzgerald now expects Tesla’s capital expenditures at approximately $9.2 billion for FY2025 and around $12 billion for FY 2026, a substantial increase tied to the company’s efforts to further scale its operations. The analyst noted that these investments align with Tesla’s push into robotics, autonomous driving, and energy storage.

Confidence in AI-driven expansion

Tesla shares closed at $433.72 last Friday, giving Cantor Fitzgerald’s $510 price target an implied upside of roughly 17.6%. The revised forecast reflects the firm’s expectation that Tesla’s long-term value extends far beyond vehicle sales, with strong upside from the company’s FSD, Robotaxi/Cybercab, Semi, and Optimus initiatives, as noted in a StreetInsider report.

Advertisement

“Overall, we remain bullish on TSLA over the medium to long term,” Sheppard wrote. “We continue to see meaningful future upside from Energy Storage & Deployment, FSD, Robotaxis/Cybercab, Semis, and Optimus Bots.”

Tesla highlighted these key initiatives in its Q3 2025 Update Letter. “We continue to evolve and augment our product lineup with a focus on cost, scale and future monetization opportunities via services powered by our AI software. Cybercab, Tesla Semi and Megapack 3 are on schedule for volume production starting in 2026,” the company wrote.

Continue Reading

News

Tesla is ramping its hiring for Cybercab vehicle manufacturing roles

A check of the company’s Careers website shows 30 open positions tied to the Cybercab project, with 25 focused directly on vehicle manufacturing.

Published

on

Credit: Tesla/YouTube

Tesla is accelerating preparations for its upcoming Cybercab by rapidly expanding its hiring efforts in Austin, Texas. 

A check of the company’s Careers website shows 30 open positions tied to the Cybercab project, with 25 focused directly on vehicle manufacturing. The spike in listings suggests that Tesla may be gearing up for a production ramp of its fully autonomous two-seater at Giga Texas.

New Cybercab job listings

Tesla’s Careers page now features several new roles that appear crucial to the Cybercab’s buildout. Among the most recent additions are openings for Engineering Technicians for the Cybercab’s drive units, battery pack, and general assembly, as well as positions for Equipment Technicians for the vehicle’s production lines.

Earlier this month, Tesla only had three openings related to the autonomous two-seater’s manufacturing. Even then, it was already exciting as the Cybercab would be produced using Tesla’s “Unboxed” manufacturing process. This process is designed to make the Cybercab easier and quicker to produce. 

Similar to previous Cybercab-related job listings, all of the openings are currently based in Austin, Texas. This suggests that for now, at least, the production of the Cybercab will really be focused on Giga Texas to start.

Advertisement

Ultra-fast Cybercab production targets

Tesla CEO Elon Musk has described the Cybercab as the company’s highest-volume vehicle yet, targeting an annual production rate of around 2 million units. He added that the Cybercab line will operate more like a “high-speed consumer electronics” assembly process than a conventional car factory.

“If you’ve seen the design of the Cybercab line, it doesn’t look like a normal car manufacturing line,” Musk said earlier this year. “It looks like a really high-speed consumer electronics line. In fact, the line will move so fast that actually people can’t even get close to it.”

Continue Reading

Elon Musk

Memphis to use xAI taxes for neighborhood improvements: “Truly a blessing”

City officials confirmed that the funds will be reinvested in local neighborhoods near xAI’s Colossus supercomputer.

Published

on

Credit: xAI/X

The City of Memphis has collected all taxes owed by Elon Musk’s xAI before the payment deadline, creating a $3.2 million special revenue fund to support communities affected by the company’s operations. 

City officials confirmed that the funds will be reinvested in local neighborhoods near xAI’s Colossus supercomputer.

Directing xAI funds toward community projects

Mayor Paul Young’s administration recently outlined how the funds will be allocated. The initiative was focused on improving infrastructure and quality of life in neighborhoods impacted by xAI’s construction and operations. 

Councilwoman Yolanda Cooper-Sutton emphasized that the process will include public input, with surveys already distributed to residents to guide spending priorities, according to ABC24.

“With that ordinance, we are in the near future getting ready to set up the committee because this is the people’s money,” Cooper-Sutton said. “We wanna make sure that it is used for the people.”

Advertisement

Officials noted that they are planning to present a final proposal to the entire council after reviewing community feedback. Cooper-Sutton added that the program represents a step toward ensuring businesses operating in Memphis treat residents “fairly and with equality.”

“It is truly, truly a blessing. What we are doing here at this body and this council, we wanna make sure that whatever business that comes here, that the people are treated fairly and with equality,” she stated. 

xAI partnership fuels local job opportunities

Beyond tax revenue, xAI’s growing presence is expected to bolster Memphis’ workforce development goals. Earlier this month, the artificial intelligence startup co-hosted a job fair at Crosstown Concourse with the American Job Center to connect residents with new employment pathways.

“We know that jobs are coming. We know that talent is here,” Melody Freemon, executive director of the Greater Memphis Workforce Development Board, stated. “We wanna make sure we’re not just putting people in any ole jobs. We wanna put people on a pathway to self-sustainability. We wanna put people on a pathway to self-sustainability and something they can rely on in the future.”

Freemon also noted that the Greater Memphis Workforce Development Board was able to make a favorable offer to xAI. “We promised that we can provide a pipeline. This is the central hub for connection. This is where job seekers are, so let us take the headache off of your hiring needs. Come here, let us source the people and make sure that we meet the demand,” Freeman stated.

Advertisement
Continue Reading

Trending