Connect with us

News

Tesla China to fix Model X brake safety recall with OTA software update

(Credit: Tesla)

Published

on

Tesla is recalling over 4,700 Model X in China due to an issue that could affect braking performance. Similar to most Tesla recalls, the issue would be addressed through an over-the-air software update. 

The recall affects a total of 4,787 Model X vehicles that were produced between October 13, 2021 and September 28, 2023. As per an announcement on the website of China’s State Administration for Market Regulation (SAMR), affected Model X vehicles may fail to alert drivers when their brake fluid level is low. 

As per the SAMR announcement, the issue could lead to decreased braking performance on affected Model X vehicles. In extreme cases, affected vehicles could see an increased crash risk.

To address the issue, Tesla will roll out software version 2023.32.9 or later to affected vehicles, which should correct the issue. This way, the affected Model X vehicles would be able to send out proper alerts when their brake fluid levels are low, as noted in a CNEV Post report. 

In the rare case that an affected Model X is unable to receive version 2023.32.9 over-the-air, Tesla has stated that it will contact vehicle owners to schedule a service appointment. This would be done free of charge. 

Advertisement

The majority of Tesla’s recalls are software updates to its fleet of vehicles. This makes them relatively easy to address, but it also results in vast numbers of vehicles being affected in each “recall.” In May alone, Tesla “recalled” over 1.1 million vehicles in China over a regenerative braking issue. That recall was also addressed through an OTA update.  

Tesla has a factory in Shanghai that produces the Model 3 and Model Y, but the Model S and Model X remain imported to China from the Fremont Factory. The Shanghai factory is Tesla’s largest in the world, with an annual production capacity of over 950,000 vehicles, as per Tesla’s Q3 2023 Update Letter. 

Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Mazda adopts Tesla’s North American Charging Standard (NACS) in Japan

Mazda’s decision to adopt Tesla’s standard is intended to provide more convenience to customers.

Published

on

Tesla-nacs-north-american-standard
(Credit: Tesla)

Japanese automaker Mazda Motor Corporation has announced that it has reached an agreement with American electric car maker Tesla to adopt the North American Charging Standard (NACS) for its EVs. 

The update was shared by Mazda in a press release.

Mazda’s NACS Commitment

As per Mazda in its press release, NACS will be adopted for battery electric vehicles that will be launched in Japan from 2027 onward. This is quite interesting as Tesla’s NACS system will be used by Mazda within Japan. As per the automaker, its decision to adopt Tesla’s standard is intended to provide more convenience to customers. 

“Mazda adopted NACS to provide customers with greater convenience by a broader range of charging options. This will provide Mazda BEV customers with access to Tesla Superchargers across Japan. Mazda BEVs will be compatible with other charging standards besides NACS with the use of adapters,” Mazda wrote in its press release.

Not the Only Japanese NACS Adopter

Interestingly enough, Mazda is not the first Japanese automaker to adopt NACS to take advantage of Tesla’s Supercharger Network in Japan. In September last year, Sony Honda Mobility announced that it was adopting NACS for its AFEELA electric vehicles. While AFEELA’s EVs are expected to be initially available in the United States in 2025, the vehicles will also be coming to Japan later on.

Advertisement

Mazda’s adoption of Tesla’s charging standard was praised by Tesla Director of Charging Max de Zegher, who noted that it is only a matter of time before NACS becomes the standard in Japan and other countries. NACS has so far been adopted widely by electric car makers in the United States.

“NACS becoming the standard in Japan (and South Korea) seems like only a matter of time now. It’s also great to see other fast-charging networks starting to install NACS in Japan. Tesla Charging is accelerating the transition to NACS, for the industry to get clarity faster. Vehicle manufacturers also don’t want to build market-specific variants— like CHAdeMO just for Japan or CCS1 just for South Korea,” the Tesla executive wrote in a post on X.

Continue Reading

Elon Musk

Tesla proves once more that its factories are its best product

Tesla’s factories are the company’s biggest products–literally.

Published

on

Credit: Tesla China

Tesla’s factories are not just the company’s biggest assets. They are also its best product. This is, at least, as per Tesla China’s recent post on social media platform Weibo.

Tesla China’s Weibo post was shared to celebrate Giga Shanghai’s changeover to the new Model Y, which is currently being delivered to consumers globally.

Tesla’s Best Product

In its post, Tesla China noted that Gigafactory Shanghai was able to complete its new Model Y production ramp up in just six weeks. This is a new record for Tesla, and it speaks to the company’s intense focus on efficiency. Tesla also highlighted the Cybercab’s production line in its Weibo post, stating that the upcoming vehicle will see “ultra-high levels of automation” when it gets produced.

“The factory is Tesla’s best product—Tesla Shanghai Super Factory completed the new Model Y production capacity ramp-up within 6 weeks, setting a record for the company’s fastest model production speed. In the future, the North American factory is expected to roll out a Tesla self-driving electric Cybercab every 5 seconds to subvert the vehicle production and manufacturing model. Adhering to the first principle of car manufacturing is Tesla’s core advantage that is difficult to copy,” Tesla China wrote in its post.

Tesla’s Factories

Tesla’s factories are among the best in the world. Tesla only operates four vehicle factories for its entire vehicle lineup today, which is quite impressive for a company that has so far sold up to 1.8 million vehicles per year. Tesla is expected to improve its factories’ output with its future vehicles as well, with Elon Musk stating during the company’s Q1 2025 All-Hands Meeting that the Cybercab’s factory will look more like a high-speed consumer electronics line than a car production line. These innovations, Musk noted, should allow Tesla to ramp the Cybercab’s production to 2 million units per year. 

Musk highlighted the importance of Tesla’s factories in the first quarter earnings call as well. While discussing the Cybercab’s line, Musk noted that with Tesla, the factory is as much a product as its cars. “The factory is the product as much as the car is the product. So, this really is the first principles approach to manufacturing that will ultimately allow us, I think, to… achieve a cycle time, meaning a unit every five seconds or less, off a single line,” Musk stated.

Advertisement
Continue Reading

News

Starlink to launch on United Airlines planes by May 15

Select United Airlines passengers will get free Starlink internet, with 200+ Mbps speeds. Early testers streamed MLB & live news with ease.

Published

on

Starlink-united-airlines-free-wi-fi
(Credit: United Airlines)

Starlink will launch on United Airlines planes by May 15, 2025, providing select passengers with free internet inflight.

Recently, Sean Cudahy from The Points Guy tried out United Airlines’ free Starlink Wi-Fi. The airline invited a few media to try out Starlink Aviation Wi-Fi before its official launch.

According to Cudahy, connecting to Starlink was easy. All he had to do was take out his phone and connect to the Unitedwifi.com network, which took him to a landing page. Once he clicked “get started” on the landing page, it opened the United mobile app on his phone.

The United app verified Cudahy’s status as a MileagePlus member. After that, all he had to do was click on “connect,” and he was all set. Starlink’s speed was reliable and just what passengers would need on a long flight.

Advertisement

“I ran a speed test, and it clocked the Wi-Fi at 217 Mbps of download speed, and 26.8 Mbps of upload speed,” noted Cudahy.

Cudahy added that connection to Starlink Wi-Fi on his other devices, like his tablet, was easier. All he had to do was scan a QR code on his phone from his tablet.

“United certainly isn’t exaggerating on the speed of the service: I was able to simultaneously watch a live news feed about the selection of a new Pope on one device, and stream a live Major League Baseball game on another,” The Points Guy noted in his review of Starlink Aviation.

United Airlines is offering Starlink services for free to MileagePlus members. Based on Cudahy’s experience, it’s best to download the United mobile app before your flight.

United Airlines expects to equip all 300 of its Embraer 175 planes with Starlink by the end of the year. It plans to install 40 regional jets with Starlink equipment every month.

Last month, the Federal Aviation Administration (FAA) approved United Airlines’ Starlink-equipped planes. United plans to roll out Starlink Wi-Fi across all its flights. It is currently working to receive FAA approval to install Starlink equipment on over 16 aircraft models.

Advertisement
Continue Reading

Trending