News
SpaceX’s claw-boat ready to recover rocket fairing with a giant net
Teslarati’s West coast photographer Pauline Acalin has captured some amazing photos of one of SpaceX’s most immediately recognizable fairing recovery vessels berthed in the Port of San Pedro. For the first time ever, the vessel (officially named Mr. Steven) has had its iconic claw rigged with a massive net intended to gently capture Falcon 9 payload fairings.
SpaceX has been trying in earnest to recover its rockets’ fairings for approximately one year, but has yet to recover a fairing intact. While the company appeared to have recovered at least one large fragment on the East coast, success has proven elusive, and CEO Elon Musk noted in press conferences before and after Falcon Heavy’s inaugural launch that the task had proven more difficult than was anticipated. Despite the difficulties, SpaceX has no intention of surrendering their valuable fairings (a $5 million pallet of cash, as Musk once joked) to the sea.
-
- Imagine this building-sized fairing traveling approximately TWO MILES PER SECOND. (USAF)
-
- Mr Steven’s big ‘ole net and iconic claws hunger for Falcon fairings. (Pauline Acalin/Teslarati)
Along with the imminent introduction of SpaceX’s upgraded “Fairing 2.0” on the upcoming Wednesday launch of PAZ, chances of a successful fairing recovery are almost certainly higher than ever before. While SpaceX and CEO Musk has only revealed that the upgraded fairing is somewhat larger than its predecessor, it can also be more or less guaranteed that its aforementioned upgrades go well beyond larger dimensions, likely extending into improved reusability hardware, greater ease of manufacture, and much more. This should come as no surprise – SpaceX has a long and storied history of making constant, iterative improvements to all aspects of itself, be it hardware, software, design, or manufacturing.
Mr. Steven’s fancy new net captured in the golden hour before sunset at L.A.’s Port of San Pedro. (Pauline Acalin/Teslarati)
Enter Mr. Steven’s fancy new netting. While no bouncy castle, a highly maneuverable vessel with an effortlessly reusable net is arguably far superior to a dead-in-the-water piece of inflatable plastic. As the fairing (theoretically) floats gently down to the surface of the ocean under its guided parachute, Mr. Steven’s coxswain will be tasked with skillfully maneuvering the boat to account for any the sea state and any winds in order to maintain its position at the fairing’s destination. If all goes well, at least half of Falcon 9’s payload fairing will gently drop into Mr. Steven’s net, marking SpaceX’s first successful recovery. If things don’t go exactly as planned, a 1000kg hunk of metal and composite could theoretically smash into poor Mr. Steven at an unhealthy velocity. However, things are looking considerably more positive this time around.
SpaceX’s fairing grabber, Mr. Steven, a couple days ago preparing to ship out for Wednesday’s launch at Vandenberg. @Teslarati #paz #Starlink pic.twitter.com/lfWjUGy56k
— Pauline Acalin (@w00ki33) February 19, 2018
By all appearances, SpaceX has retained the same general strategy of fairing recovery mentioned in the past by Musk and other executives. To oversimplify, after launch, the payload fairing separates (mechanically) from the second stage once Falcon 9 or Heavy has left behind the majority of Earth’s atmosphere. After separation, each fairing half orients itself for a gentler reentry into the atmosphere with cold nitrogen gas thrusters, likely the exact same thrusters used in part to achieve Falcon 9’s accurate and reliable landings. Due to their massive surface area and comparatively tiny weight, fairing halves effectively become exceptionally finicky and awkward sails falling through the atmosphere at insane velocities, with the goal generally being to orient each half like a boat’s hull to provide some stability. Once they are low enough, assuming they’ve survived the journey from TEN TIMES THE SPEED OF SOUND and 62 MILES above Earth’s surface to a more reasonable ~Mach 0.5 and maybe 5 miles of altitude, the fun parts begin. At this point, each fairing half deploys a GPS-connected parachute system (a parasail, to be exact) capable of directing the massive hunks of carbon fiber and aluminum to a very specific point on the surface of the ocean.
Successful fairing recovery would quite literally entail an immediate cost reduction of as much as 10% of a Falcon 9’s entire advertised launch price, ~$6 million. For recovery of a single half, that figure is of course…halved, but $3 million is still an impressive instantaneous cost reduction. It’s unclear how SpaceX eventually intends to recover both halves of the fairing – a Mr. Steven sibling, perhaps? – but that is a problem for future SpaceX!
Mr. Steven and his net are likely to get their first taste of action in just two days – PAZ and two of SpaceX’s very own prototype internet satellites are set to launch at 6:17 am PST on Wednesday, February 21. Stay tuned for a link to SpaceX’s official webcast and follow us on social media for down-to-the-minute updates.
Teslarati – Instagram – Twitter
Tom Cross – Twitter
Pauline Acalin – Twitter
Eric Ralph – Twitter
https://twitter.com/_TomCross_/status/965394574578540545
The Tesla Semi is entering a new Pilot Program with Paper Transport, LLC (PTI), a Wisconsin-based transportation provider. The company will test the Semi’s Long Range configuration through “dedicated operations within the Chicago market.”
Chicago presents an interesting challenge for the Semi, as it will be a colder-weather climate that will test the Semi’s ability to operate in lower temperatures and in potentially large accumulations of snow. This is something Tesla has been testing with the Semi in Alaska and even in Northern California during the colder months, but Chicago will present a truly tough midwestern winter.
Tesla Semi spotted on journey home after winter performance testing
PTI says it is using the Semi to evaluate its strategy of reducing transportation emissions while maintaining performance, reliability, and cost efficiency. These are major arguments for the Semi being introduced into new fleets.
CEO of PTI Tyler Ellison said:
“PTI has been a leader in sustainable transportation solutions for over 15 years. We take a consultative approach to helping customers identify and implement the right transportation solution for their network. Our partnership with Tesla expands our portfolio alongside renewable natural gas and intermodal, giving customers more ways to reduce Scope 3 emissions without compromising service or economics.”
PTI is far from the first company to adopt the Semi within a fleet, as Tesla entered strategic agreements with PepsiCo. and its subsidiary Frito-Lay for a Pilot Program that extended throughout the California region.
Tesla has let companies like those utilize the Semi to determine whether it would be suitable for their operations. Additionally, Tesla gets valuable information regarding the Semi’s performance, knowing what to improve and what is ideal for companies that will utilize the all-electric truck for regional and nationwide logistics.
PTI plans to utilize the Long Range configuration, which is priced at $290,000 and features a range of approximately 500 miles, a three-motor powertrain, up to 800 kW of drive power, and consumption of just 1.7 kWh per mile.
Tesla Semi pricing revealed after company uncovers trim levels
VP of Maintenance at PTI, Bryan Ellen, added:
“We are excited to partner with Tesla, leveraging their ever-evolving technology. We are bullish in our estimation of the parallels available between our dedicated model and the efficiency of their fully electric Class 8 tractor. We anticipate a growing synergy between our businesses as we work to facilitate this sustainable solution for our customers.”
PTI has logged more than 87 million miles using sources like compressed and renewable gas, but now is looking to take it a step further with fully electric operations.
Tesla revealed on Monday that it is building a new autonomous vehicle at Gigafactory Texas, its plant just outside of the City of Austin. This particular vehicle will be geared toward those who are in need of a wheelchair-accessible car that would require no human driver for operation.
According to a new report from Wired, Tesla’s Senior Policy Advisor, India Herdman, told members of the Washington D.C. City Council on Monday:
“We are in development for a purpose-built, wheelchair-accessible autonomous vehicle. We know that paratransit can be very difficult, and people who are confined to wheelchairs permanently should still be able to move around freely, so that is an active product being built by Tesla in Texas.”
This builds upon what CEO Elon Musk said last year on X, which confirmed the company was working on accessible rides within its Robotaxi platform, which currently is confined to the Model Y.
Absolutely
— Elon Musk (@elonmusk) September 19, 2025
Tesla is also developing the Cybercab, which started employee rides last week. However, this vehicle is not necessarily geared toward wheelchair accessibility.
That leaves a major gap in the autonomous ride-sharing program that Tesla is attempting to build; the company has been pretty clear that it does not want to complicate its manufacturing lines by bringing in a wide array of body styles.
However, it seems necessary to have something larger that could help transport people to appointments when they cannot drive. For wheelchair accessibility, the Robovan, which was unveiled at the “We, Robot” event in October 2024, seems to be the most ideal solution:
Herdman did not indicate whether she was referring to the Robovan or if Tesla is building yet another body style that is geared toward full autonomy but also caters to the handicapped.
Tesla might need to develop something specifically for the handicapped in order to align with the Americans with Disabilities Act, which prevents discrimination against people with disabilities in transportation services. Uber was hit with a lawsuit late last year for “refusing to reasonably modify its policies, practices, or procedures where necessary to avoid discriminating against riders with disabilities.”
Tesla would obviously like to avoid this.
It will be interesting to see what Tesla will do with this project, and whether it will introduce something new to the market or just continue with the Robovan.
Tesla weirdly confirmed that its steering wheel-less and pedal-less Cybercab vehicle is now in the process of giving employees rides, a huge milestone for the vehicle program.
But the entire thing was super strange. On Friday, Tesla released a video stating that there was “Cool news from Giga Texas” and that employees were now taking rides in Cybercabs that have no manual controls. The units seen on public roads are engineering vehicles that have manual controls inside, a necessity as Tesla moved through the testing phase.
However, Tesla removed the video and reposted it shortly after with a more vague title. It seems like the employee rides are still going, but the video was adjusted slightly. The initial upload showed employees doing things like watching movies and adjusting the climate, but these snippets were removed in the second upload.
Cool news from Giga Texas pic.twitter.com/gvbG456Tzw
— Tesla Robotaxi (@robotaxi) July 11, 2026
Both images below were uploaded with the first video, but were removed after Tesla re-uploaded the announcement. These are not available in the second upload
Credit: Tesla
Credit: Tesla
Nevertheless, the announcement from Tesla is that the Cybercab is operating with employees inside who can control the vehicle’s audio, video, climate, and destination settings through their smartphone app.
Tesla has already been testing Cybercab engineering units, but last month, it was able to self-certify for SAE Level 4, which would enable unsupervised self-driving in Texas. The company is moving toward that, and the plans have always been to launch Cybercab rides this year.
The Cybercab is potentially looked at as the next generation of Tesla’s mobility leg. For the past 15 years, the company has been known as somewhat of an automaker, among many other things. However, these passenger vehicles that Tesla has manufactured are now moving into a new realm, as they will eventually drive themselves with no supervision thanks to the Full Self-Driving suite.
The Cybercab is just the next step of that: a true vehicle developed for the sole purpose of ride-hailing. It has no human controls, it has only two seats, and it will get passengers from Point A to Point B with no awkward driver, no need for manual inputs, and with no stress.
Tesla is moving forward with other developments related to the Cybercab project as well. However, the big announcement will come when Tesla finally announces that it is launching Cybercab rides to the general public, something that it plans to launch either late this year or early 2027.
Tesla Semi enters new Pilot Program with interesting challenge
Tesla is building a wheelchair-accessible Robotaxi
