Connect with us

News

SF Motors set sights on EV mass production with latest R&D testing facility

Published

on

Santa Clara based electric vehicle startup SF Motors is opening up a new full-scale R&D center in Silicon Valley. SF Motors was founded in January 2016 after a large investment from Sokon Motors, a large Chinese automotive company. The company’s new 130,000 sqft research and development facility will be located in Milpitas, CA, roughly 6 miles away from SF’s headquarters.

The new facility, which is expected to be completed in Q4 ’18, will be capable of “small batch” manufacturing and development of manufacturing processes. The company is focusing on battery, powertrain, and autonomous vehicle development at the facility.

“Adding to our existing R&D labs, this new facility will conduct extensive design validation testing and small-scale manufacturing necessary to ensure a smooth transition to mass production of our batteries and electric powertrains, which are key components of our vehicles,” said SF Motors CTO Yifan Tang.

Yifan Tang joined SF Motors in February 2017. He was previously the technical lead on Facebook’s high-altitude long-range aircraft aimed at beaming internet across the globe. Before Facebook, Tang was VP of Drivetrain Engineering at Lucid Motors for three years and Principal Motor Technologist at Tesla for five years. During his time at Tesla Tang designed the motors for the Roadster, Model S, Mercedes B-Class/Toyota Rav4, and the prototype Model X AWD. Tang has a Ph.D. in electrical engineering from The Ohio State University and 35 U.S. patents.

In October 2017 SF Motors acquired Tesla co-founder Martin Eberhard’s battery module startup evINIT for $33M. Eberhard is now Chief Strategy Officer at SF Motors and the former CEO of evINIT, Mike Miskovsky, is Chief Development Officer. Eberhard served as the CEO of Tesla in its early years until late 2007.

Advertisement

Closing the loop from R&D to Manufacturing

SF Motors’ CTO Yifan Tang tells Teslarati that the new facility will help “close the loop from R&D to manufacturing,” and help accelerate the company to mass production. Tang describes the new facility as a key part of SF Motors strategy as they push forward to mass production.

According to SF Motors, the company is already prepping manufacturing facilities in the U.S. and China. SF Motors purchased a 675,000 sqft plant in Indiana from AM General in November 2017. The company also has a massive factory in Chongqing, China, with nearly 8.4M sqft of manufacturing space that’s capable of producing 200,000 vehicles per year.

SF Motors’ new R&D Facility in Milpitas, California (Photo: Loopnet/McCarthy Creekside
Industrial Center)

SF’s Tang emphasized that the company’s abilities to produce small-batch trial production at their R&D facility will differentiate itself from other automotive manufacturers. The company plans to also produce battery cells at the facility and will test different cell configurations, modules, and battery pack sizes.

SF plans to produce a wide range of vehicles, and the ability to tweak cell chemistry along with module configurations will allow them to produce battery packs that are optimized for cost efficiency and performance.

The new R&D facility will house roughly 100 employees, but its proximity to the company’s headquarters allows the company to shift employees back and forth. “Drawing on our global business model and decades of manufacturing experience, locating this facility near our Silicon Valley headquarters will strategically ensure quality and efficiency as we prepare to bring our intelligent EVs to market,” Tang said in a press release.

SF Motors plans to start trial production of their vehicles at the end of this year.

Advertisement

Update at 10:35 am PT: An earlier version of this article incorrectly stated that SF Motors was a subsidiary of Sokon Motors. Sokon Motors was a large initial investor in SF Motors, but does not wholely own the company. 

Christian Prenzler is currently the VP of Business Development at Teslarati, leading strategic partnerships, content development, email newsletters, and subscription programs. Additionally, Christian thoroughly enjoys investigating pivotal moments in the emerging mobility sector and sharing these stories with Teslarati's readers. He has been closely following and writing on Tesla and disruptive technology for over seven years. You can contact Christian here: christian@teslarati.com

Advertisement
Comments

Elon Musk

Elon Musk is now a remote DOGE worker: White House Chief of Staff

The Tesla and SpaceX CEO Elon Musk is no longer working from the West Wing.

Published

on

Credit: Elon Musk/X

In a conversation with the New York Post, White House Chief of Staff Susie Wiles stated that Tesla and SpaceX CEO Elon Musk is no longer working from the West Wing.

As per the Chief of Staff, Musk is still working for DOGE—as a remote worker, at least.

Remote Musk

In her conversation with the publication, Wiles stated that she still talks with Musk. And while the CEO is now working remotely, his contributions still have the same net effect. 

“Instead of meeting with him in person, I’m talking to him on the phone, but it’s the same net effect,” Wiles stated, adding that “it really doesn’t matter much” that the CEO “hasn’t been here physically.” She also noted that Musk’s team will not be leaving.

“He’s not out of it altogether. He’s just not physically present as much as he was. The people that are doing this work are here doing good things and paying attention to the details. He’ll be stepping back a little, but he’s certainly not abandoning it. And his people are definitely not,” Wiles stated.

Advertisement

Back to Tesla

Musk has been a frequent presence in the White House during the Trump administration’s first 100 days in office. But during the Q1 2025 Tesla earnings call, Musk stated that he would be spending substantially less time with DOGE and substantially more time with Tesla. Musk did emphasize, however, that DOGE’s work is extremely valuable and critical.

“I think I’ll continue to spend a day or two per week on government matters for as long as the President would like me to do so and as long as it is useful. But starting next month, I’ll be allocating probably more of my time to Tesla and now that the major work of establishing the Department of Government Efficiency is done,” Musk stated.

Continue Reading

Elon Musk

Tariff reprieve might be ‘Tesla-friendly,’ but it’s also an encouragement to others

Tesla stands to benefit from the tariff reprieve, but it has some work cut out for it as well.

Published

on

tesla employee
(Photo: Tesla)

After Secretary of Commerce Howard Lutnick made adjustments to the automotive tariff program that was initially announced, many quickly pointed to the reprieve as “Tesla-friendly.”

While that may be the case right now, it was also a nudge of encouragement to other companies, Tesla included, to source parts from the U.S. in an effort to strengthen domestic manufacturing. Many companies are close, and it will only take a handful of improvements to save themselves from tariffs on their cars as well.

Yesterday, Sec. Lutnick confirmed that cars manufactured with at least 85 percent of domestic content will face zero tariffs. Additionally, U.S. automakers would receive credit up to 15 percent of the value of vehicles to offset the cost of imported parts.

Big Tesla win? Sec Lutnick says cars with 85% domestic content will face zero tariffs

“This is ‘finish your cars in America and you win’,” Lutnick said.

Many were quick to point out that only three vehicles currently qualify for this zero-tariff threshold: all three are Teslas.

However, according to Kelley Blue Book’s most recent study that revealed who makes the most American cars, there are a lot of vehicles that are extremely close to also qualifying for these tariff reductions.

Tesla has three vehicles that are within five percent, while Ford, Honda, Jeep, Chevrolet, GMC, and Volkswagen have many within just ten percent of the threshold.

Tesla completely dominates Kogod School’s 2024 Made in America Auto Index

It is within reach for many.

Right now, it is easy to see why some people might think this is a benefit for Tesla and Tesla only.

But it’s not, because Tesla has its Cybertruck, Model S, and Model X just a few percentage points outside of that 85 percent cutoff. They, too, will feel the effects of the broader strategy that the Trump administration is using to prioritize domestic manufacturing and employment. More building in America means more jobs for Americans.

Credit: Tesla

However, other companies that are very close to the 85 percent cutoff are only a few components away from also saving themselves the hassle of the tariffs.

Ford has the following vehicles within just five percent of the 85 percent threshold:

  • Ford Mustang GT automatic (80%)
  • Ford Mustang GT 5.0 (80%)
  • Ford Mustang GT Coupe Premium (80%)

Honda has several within ten percent:

  • Honda Passport All-Wheel-Drive (76.5%)
  • Honda Passport Trailsport (76.5)

Jeep has two cars:

  • Jeep Wrangler Rubicon (76%)
  • Jeep Wrangler Sahara (76%)

Volkswagen has one with the ID.4 AWD 82-kWh (75.5%). GMC has two at 75.5% with the Canyon AT4 Crew Cab 4WD and the Canyon Denali Crew Cab 4WD.

Chevrolet has several:

  • Chevrolet Colorado 2.7-liter (75.5%)
  • Chevrolet Colorado LT Crew Cab 2WD 2.7-liter (75.5%)
  • Chevrolet Colorado Z71 Crew Cab 4WD 2.7-liter (75.5%)

These companies are close to reaching the 85% threshold, but adjustments need to be made to work toward that number.

Anything from seats to fabric to glass can be swapped out for American-made products, making these cars more domestically sourced and thus qualifying them for the zero-tariff boundary.

Frank DuBois of American University said that manufacturers like to see stability in their relationships with suppliers and major trade partners. He said that Trump’s tariff plan could cause “a period of real instability,” but it will only be temporary.

Now is the time to push American manufacturing forward, solidifying a future with more U.S.-made vehicles and creating more domestic jobs. Tesla will also need to scramble to make adjustments to its vehicles that are below 85%.

Continue Reading

News

Tesla Cybertruck RWD production in full swing at Giga Texas

Videos of several freshly produced Cybertruck LR RWD units were shared on social media platform X.

Published

on

Credit: Joe Tegtmeyer/X

It appears that Tesla is indeed ramping the production of the Cybertruck Long Range Rear Wheel Drive (LR RWD), the most affordable variant of the brutalist all-electric pickup truck.

Videos of several freshly produced Cybertruck LR RWD units were shared on social media platform X.

Giga Texas Footage

As per longtime Tesla watcher Joe Tegtmeyer, Giga, Texas, was a hotbed of activity when he conducted his recent drone flyover. Apart from what seemed to be Cybercab castings being gathered in the complex, a good number of Cybertruck LR RWD units could also be seen in the facility’s staging area. The Cybertruck LR RWD units are quite easy to spot since they are not equipped with the motorized tonneau cover that is standard on the Cybertruck AWD and Cyberbeast.

The presence of the Cybertruck LR RWD units in Giga Texas’ staging area suggests that Tesla is ramping the production of the base all-electric pickup truck. This bodes well for the vehicle, which is still premium priced despite missing a good number of features that are standard in the Cybertruck AWD and Cyberbeast.

Cybertruck Long Range RWD Specs

The Cybertruck LR RWD is priced at $69,990 before incentives, making it $10,000 more affordable than the Cybertruck AWD. For its price, the Cybertruck Long Range RWD offers a range of 350 miles per charge if equipped with its 18” standard Wheels. It can also add up to 147 miles of range in 15 minutes using a Tesla Supercharger.

Advertisement

Much of the cost-cutting measures taken by Tesla are evident in the cabin of the Cybertruck LR RWD. This could be seen in its textile seats, standard console, seven-speaker audio system with no active noise cancellation, and lack of a 9.4” second-row display. It is also missing the motorized tonneau cover, the 2x 120V and 1x 240V power outlets on the bed, and the 2x 120V power outlets in the cabin. It is also equipped with an adaptive coil spring suspension instead of the adaptive air suspension in the Cybertruck AWD and Cyberbeast.

Continue Reading

Trending