Connect with us

News

Tesla’s simple Model 3 drivetrain design is key to its mass market future

[Credit: Ingineerix/YouTube]

Published

on

One can argue that the simplicity in design of the Tesla Model 3 drivetrain and subframe assembly is a key to Tesla’s future. Used in both the Model 3 and the Tesla Semi, while also serving as a platform for Tesla’s upcoming Model Y, the powerful and efficient drivetrains are designed with versatility in mind, as recently highlighted by auto enthusiast Ingineerix on YouTube.

In the short video clip, a Tesla drive unit retrieved from a totaled Model 3 aims to highlight the straightforward design of the all-electric drivetrain that lends itself to ease of manufacturing. Aside from a housing for the inverter and permanent magnet switch reluctance motor, only a handful of electrical connectors could be seen, including a high-voltage connector that leads to Model 3’s battery pack, and a data connector. The entire subframe is attached to the Model 3’s chassis by four bolts, which, when removed, allows the whole assembly to be detached cleanly from the vehicle.

The Long Range RWD Model 3’s drive unit is rated at 211 kW, powerful enough to propel the electric car from a dead stop to 60 mph in 5.1 seconds. The simplicity of the drivetrain’s design is further exemplified by the company’s usage of four Model 3 electric motors in Tesla’s tire-shredding electric Semi truck.

When Elon Musk unveiled the Model 3, he made it a point to emphasize that the vehicle is designed to be as simple as possible. Everything, from its chassis to its electric motor, was built with efficiency and simplicity in mind.

In an era of DIYers and their knack for resurrected Frankenstein projects, Tesla Model 3’s drive unit could very well prove to be popular with hobbyists and aftermarket companies looking to capitalize on electric vehicle conversions. This will especially hold true as electric vehicles start to command a significant market share and manufacturing of electric drivetrains, along with access to salvaged vehicles, become more prevalent.

Advertisement

The Model 3 is one of the final phases of Elon Musk’s first Master Plan, which he penned back in 2006. During that time, Musk envisioned the Model 3 to be a vehicle that brings EVs mainstream. Almost twelve years down the road, with Tesla seemingly hitting its pace to the deliver the Model 3 en masse to reservation holders, it appears that the electric car is doing just that.

Tesla’s drive units are quite durable, with a Tesla Model S recently passing the 400,000-mile mark on the road. Thus, it seems safe to assume that the Model 3’s drive unit would be just as durable, if not even better built, than Tesla’s first-generation electric motor. Tesla is aiming to produce around 500,000 Model 3 in a year. That’s half a million electric cars with drivetrains that could easily be detached and used for optimal EV conversions, even after the Model 3 is retired. With the Model 3, Tesla might have really created a car that can usher in a new era of automobiles.

Watch a quick walkthrough of a detached Model 3 drive unit in the video below.

Advertisement

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla launches Full Self-Driving in a new region

Today, Tesla launched Full Self-Driving in Australia for purchase by car buyers for $10,100, according to Aussie automotive blog Man of Many, which tried out the suite earlier this week.

Published

on

Credit: Tesla

Tesla has launched its Full Self-Driving suite in a new region, marking a significant step in the company’s progress to expand its driver assistance suite on a global scale.

It is also the first time Tesla has launched FSD in a right-hand-drive market.

Today, Tesla launched Full Self-Driving in Australia for purchase by car buyers for $10,100, according to Aussie automotive blog Man of Many, which tried out the suite earlier this week.

Previously, Basic and Enhanced Autopilot suites were available, but the FSD capability now adds Traffic Light and Stop Sign Control, along with all the features of the previous two Autopilot suites.

It is the first time Tesla has launched the suite by name in a region outside of North America. In China, Tesla has “City Autopilot,” as it was not permitted to use the Full Self-Driving label for regulatory reasons.

However, Tesla still lists Full Self-Driving (Supervised) as available in the U.S., Canada, China, Mexico, and Puerto Rico.

The company teased the launch of the suite in Australia earlier this week, and it appeared to have been released to select media members in the region earlier this week:

Advertisement

Tesla FSD upcoming Australia release seemingly teased bv media

The rollout of Full Self-Driving in the Australian market will occur in stages, as Model 3 and Model Y vehicles with Hardware 4 will receive the first batch of FSD rollouts in the region.

TechAU also reported that “the initial deployment of FSDs in Australia will roll out to a select number of people outside the company, these people are being invited into Tesla’s Early Access Program.”

Additionally, the company reportedly said it is “very close” to unlocking FSD in customer cars:

Each new Tesla sold will also come with a 30-day free trial of the suite.

Australia is the sixth country to officially have Full Self-Driving available to them, following the United States, Canada, China, Mexico, and Puerto Rico.

Here’s the first look at the suite operating in Australia:

Advertisement

Continue Reading

News

Tesla AI6 chips will start sample production at surprising Samsung site

AI6 is expected to be used in Tesla’s expanding lineup of high-volume products, such as the Cybercab and Optimus.

Published

on

Credit: Tesla/YouTube

It appears that the initial sample production of Tesla’s next-generation AI6 chip would not start in Samsung’s United States-based facilities. 

AI6 is expected to be used in Tesla’s expanding lineup of high-volume products, such as the Cybercab and Optimus.

Early AI6 production

As noted in a ZDNet Korea report, the production of initial samples of Tesla’s AI6 chip is expected to start at Samsung Electronics’ domestic foundry and packing facilities in South Korea. Mass production for AI6 chips will follow at the tech giant’s Texas-based foundry in Taylor, which is expected to start operations in 2025. Investment in mass production facilities for the Taylor plant are expected to start this year, the publication noted.

Samsung has reportedly finalized the process design kit for its second-generation 2nm technology. This node offers a 12% performance improvement, 25% lower power consumption, and an 8% reduction in chip area compared to its previous-generation counterparts. 

Tesla’s AI6 deal

As per previous reports, Tesla has signed a $16.5 billion contract with Samsung for the production of its AI6 chips. In a post on social media platform X, Musk clarified that $16.5 billion is actually just the bare minimum. Considering that the demand for AI6 chips will be substantial due to the ramp of products such as Optimus and the Cybercab, it would not be farfetched if the deal becomes notably larger in the future.

Advertisement

Musk has shared his excitement for Samsung’s production of AI6 chips, with the CEO stating on X that he would “walk the line personally” in the facility to “accelerate the pace of progress.” In a follow-up comment, the Tesla CEO stated that Samsung is fully aware of what a real partnership with Tesla will be like. “I had a video call with the chairman and senior leadership of Samsung to go over what a real partnership would be like. Use the strengths of both companies to achieve a great outcome,” Musk wrote in his post. 

Continue Reading

News

Elon Musk’s Boring Company begins Tesla FSD testing in Las Vegas tunnels

The update was shared by Las Vegas Convention and Visitors Authority (LVCVA) CEO Steve Hill.

Published

on

Credit: The Boring Company/X

The Boring Company has started testing Tesla’s Full Self-Driving (Supervised) system in its Las Vegas tunnels. 

The update was shared by Las Vegas Convention and Visitors Authority (LVCVA) CEO Steve Hill in a comment to Fortune.

Controlled FSD testing

In his comments, Hill noted that Tesla’s FSD tests in the Boring Company’s underground tunnels in Las Vegas have been going on for months. However, the full-self driving Teslas have reportedly not been carrying passengers during the tests. Interestingly enough, Hill noted that the FSD-driven vehicles have not had any incidents in the Boring Company tunnels yet, though safety drivers have been required to intervene “periodically.”

Hill further noted that the self-driving Teslas have found some spots that seem quite difficult in the underground tunnels system. The LVCVA CEO added that the rock walls of the Boring Company tunnels and their colorful lighting have created some “interesting but odd lighting” for FSD. That being said, Hill noted that the FSD tests are ongoing, though the LVCVA will likely be a consultant before the self-driving vehicles’ safety drivers are removed. 

The executive, however, noted that it will only be a matter of time before the Teslas in Las Vegas’ Boring Company tunnels are operating without a driver. “Sooner or later, this is going to be autonomous,” Hill said.

Advertisement

Vegas Loop updates

The Boring Company’s underground transit system has been operating beneath the Las Vegas Convention Center for about four years. While the network is slated for expansion across more of the city, it currently connects the convention grounds with a handful of nearby hotels. Updates from the Boring Company’s official social media account on X suggests that tunneling is underway across other stops in Las Vegas.

As per the Boring Company on its official website, the greater Vegas Loop, when completed, will have 104 stations across 68 miles of tunnels. This should allow the underground system to serve an estimated 90,000 passengers per hour. It will also be able to connect key locations across the city, such as Harry Reid International Airport, Allegiant Stadium, and downtown.

While the Vegas Loop is nowhere near complete, Hill noted that the system is already well appreciated by residents and visitors. As per the LVCVA CEO, the underground transport system is the “highest rated feature we have” at the Convention Center.  “People love it,” he said, adding that the only reason the tunnels are not coming faster is due to holdups with permits. “We’re holding them back. They’re not holding us back,” he stated.

Continue Reading

Trending