Connect with us

News

Tesla’s nearly 300k Model 3 VIN registrations hint at healthy US demand

Published

on

Tesla appears to be on track to break the 300k barrier in its Model 3 VIN registrations this quarter, filing more than 74,000 vehicles on January and more than 24,000 cars this month. While these numbers are undoubtedly impressive, the recent batch of VINs registered by the company also hints at something notable — a steady demand for the Model 3 in the United States.

Based on the data gathered by Model 3 VIN registration tracking group @Model3VINs, Tesla had registered more than 44,000 vehicles this quarter for North America, comprised of both AWD and RWD units. This past Saturday alone, Tesla registered a large batch of 13,225 Model 3 VINs, and more than 95% were RWD units designated for the region, where the car has been available since it entered production in mid-2017 (Canada is the first country outside the United States that received the electric sedan). With this in mind, this recent batch of VIN filings hints at more than 12,000 RWD vehicles intended for the US and Canada. 

Advertisement

Following the fourth quarter’s results, a TSLA bear thesis has emerged claiming that Tesla has exhausted the demand for the Model 3 in the United States. Nevertheless, the most recent registration for North American vehicles suggest that even Tesla’s most affordable Model 3 variant to date — the Mid Range RWD — continues to see some healthy demand in the region. It should also be noted that Tesla still has more than a month to register and produce more Model 3 units for the US. Overall, this all but highlights Elon Musk’s words during the Q4 2018 earnings call, when he stated that Tesla is not facing a demand problem.

“I feel very confident about Model 3 demand. The customer happiness level with the car is incredible, and I think probably the highest of any car in the world right now, I think. And so you can tell like; basically, nobody wants to sell (their) car,” Musk said.

Tesla’s Model 3 VIN registrations every quarter.(Credit: Model3VINs.com)

Granted, VIN filings do not directly correspond with Tesla’s actual production numbers, but the registrations themselves have been quite effective at estimating the company’s manufacturing trends every quarter, as seen in the increasing accuracy of Bloomberg‘s Model 3 VIN tracker.

Advertisement

While the Model 3 is already making waves in the United States (and seems poised to do the same for Europe and China), it should be noted that Tesla is not starting its attack on the lower end of the market yet. For Tesla to compete in this segment, the company would have to successfully produce the elusive base Model 3, which is priced at $35,000 before incentives and savings. So far, Tesla appears to be taking steps towards the production of the vehicle, with the Mid Range Model 3 RWD now priced at a reasonable $42,900. With this in mind, it could only be a matter of time before the company starts making its most disruptive Model 3 yet. 

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

Investor's Corner

SpaceX is launching a secret spacecraft that could change how things are made in space

SpaceX’s secret disk-shaped Starfall capsule is targeting a market no reentry vehicle has cracked.

Published

on

By

SpaceX is targeting Tuesday, June 23 for the first flight of Starfall, a reentry capsule the company has developed almost entirely in private. The Falcon 9 launch window opens at 6:43 a.m. ET from Space Launch Complex 40 at Cape Canaveral Space Force Station, with a backup window available the same time on June 24. SpaceX has made no public announcement about the vehicle, only providing launch details. Everything known about it has come through FAA and FCC regulatory filings.

What makes Starfall different starts with its shape. Rather than the traditional cone used by Dragon and every other cargo return capsule in operation, Starfall is a flat disk that measures roughly  10.2 feet (3.1 meters) wide and just 2.5 feet (0.75 meters) tall, and weighing 4,630 pounds (2,100 kg) and capable of returning up to 2,200 pounds (1,000 kilograms) of payload from orbit. The disk geometry maximizes structural efficiency and payload volume relative to mass, and the heat shield mechanically jettisons just before splashdown, allowing recovery teams to retrieve both the capsule and the shield separately from the Pacific Ocean.

The difference with Starfall from existing competitors, such as Varda Space Industries, which has largely built the orbital manufacturing market and returns heavy payloads per flight is that Starfall’s specification is roughly 30 times more per mission, and is designed to be mass-produced and launched on either Falcon 9 or Starship. That combination of volume and launch access is something no standalone startup can replicate, and it puts SpaceX in direct competition with the companies that currently pay it to reach orbit.

SpaceX to launch military missile tracking satellites through new Space Force contract

Advertisement

The intended market is orbital manufacturing: pharmaceuticals, protein crystals, semiconductors, and advanced optical fiber that physically cannot be produced in the presence of gravity. FAA documents describe Starfall’s long-term purpose as building a “self-sustaining commercial in-space manufacturing market” and as a potential successor to the industrial capabilities of the International Space Station, which is set to retire in the late 2020s. Military rapid global cargo delivery is a parallel application under active discussion with the Pentagon.

The reason some industries seek manufacturing in space comes down to gravity. On Earth, gravity causes materials to settle, separate, and deform during production. In microgravity, those constraints disappear.

SpaceX’s already controls launch access, which means it currently functions as the landlord for every competitor in the orbital manufacturing return space. Starfall converts that landlord position into vertical ownership, and it would no longer just carry other companies’ capsules to orbit, but rather operate the capsule, own the return logistics, and capture the service revenue directly. Viewed alongside Starlink, Colossus, and the xAI merger, Starfall fits a consistent pattern: SpaceX identifying infrastructure layers that others depend on and moving to own them outright. Orbital manufacturing return is the next layer on that list.

If Tuesday’s reentry, parachute sequence, and recovery demonstration goes as planned, the second FAA-approved test flight follows. A successful pair of demos would position SpaceX to begin offering Starfall as a commercial service, likely first to pharmaceutical and materials science customers before scaling toward the military and broader manufacturing segments.

Advertisement
Continue Reading

News

Tesla Semi spotted with ground truth validation equipment as launch looms

Published

on

Credit: Tesla

The Tesla Semi was spotted mounted with ground truth validation equipment as the company nears its looming launch. The Semi is Tesla’s Class 8 all-electric truck, and has been utilized in its earlier stages by many companies like PepsiCo. and Frito-Lay, who have been using it in a pilot program.

The Semi was spotted in Sunnyvale, California, and sports a typical ground truth validation unit that Tesla routinely uses on its vehicles. Ground truth validation is essentially the process of training supervised algorithms to ensure they can perform reliably. Tesla typically performs this on vehicles that are being released soon:

The Semi being spotted with this type of validation rig is important because it means the company is working on solidifying a Full Self-Driving model for its commercial vehicle offering. This would be a massive development for not only Tesla but also the logistics industry as a whole.

There are strict regulations on driving hours for commercial truck drivers, and autonomy is a way to potentially combat these issues. FSD is already a widely effective way that owners of typical passenger vehicles take stress out of travel. Even launching a semi-autonomous platform for truck drivers to use to increase safety, reduce fatigue, and increase productivity would be a huge development.

Tesla Semi gets strange-but-understandable comparison from Jay Leno

Advertisement

The Semi has already proven to be an ideal solution for companies that use commercial logistics. It has increased efficiency and reduced operating costs for many companies that have been able to use it in pilot programs.

There are expected to be some bumps along the way. Tesla saw some challenges with FSD on the Cybertruck, as it had never had a vehicle with cameras at that height, so some of the features with FSD were not immediately available. Just a week ago, Tesla launched Actually Smart Summon (ASS) for Cybertruck, nearly three years after the vehicle was first delivered to customers.

Continue Reading

Elon Musk

President Trump touts new Air Force One with Musk technology

Published

on

Credit: Air Force

President Donald Trump unveiled an upgraded Boeing 747-8 at Joint Base Andrews on June 19, 2026, describing the Qatar-gifted aircraft as an interim Air Force One equipped with advanced communications systems, including Starlink, Elon Musk’s SpaceX satellite internet service.

The plane, valued at around $400 million and modified for presidential use, serves as a bridge until the delayed VC-25B replacements arrive. Trump highlighted its luxury features and new technology during remarks to service members.

Trump stated:

“We have communication equipment up there that nobody’s ever seen before. It’s the highest level and, uh, including Starlink. My friend Elon is going to be very happy, but, uh, Starlink and we have, uh, four or five different sets of double and triple communications like people haven’t seen.”

Advertisement

He added:

“And it represents what can happen with hard work, innovation, and aggressive timelines because we did this quickly and yet there’s never been communication like is on this plane.”

The aircraft features a redesigned red, white, and blue livery and has been outfitted with Starlink satellite connectivity alongside other secure systems.

Trump praised the plane’s uniqueness, calling it among the world’s most luxurious. The gift from Qatar and subsequent modifications have drawn attention, with the jet positioned as a solution for presidential travel. It is expected to support operations, including potential ceremonial roles such as Fourth of July flyovers.

The event marked the formal introduction of the converted jet, which will help maintain capabilities while the primary Air Force One fleet undergoes modernization. Defense observers note the inclusion of commercial satellite technology like Starlink as part of efforts to ensure resilient communications, crucial to keep the country running as the President is in the sky.

Advertisement

President Trump’s comments underscored appreciation for rapid upgrades and innovation in equipping the aircraft. The plane remains a U.S. government asset and is slated for eventual transfer related to presidential library purposes after its service.

Continue Reading