Connect with us

News

T-Mobile sends first ever wireless emergency alert using Starlink

Credit: T-Mobile

Published

on

T-Mobile has announced that it was able to successfully send and receive a wireless emergency alert (WEA) via Starlink satellite. The technology is expected to enter a beta test period before it is launched commercially. 

T-Mobile noted that it conducted a test alert for a hypothetical evacuation notice. The alert was sent 217 miles into space, where it was received by one of Starlink’s 175 direct-to-smartphone satellites that are currently in orbit. The notification was then broadcast to a geographic area that was affected by the hypothetical evacuation notice and received by a T-Mobile smartphone. 

As noted by T-Mobile in a press release, the whole process was extremely quick. It took emergency operators just seconds to queue up an emergency message via Starlink and deliver the alert to users on the ground. T-Mobile CEO Mike Sievert noted that the test highlighted just how far communications technology has progressed. 

“This is one of those days, as the CEO of a wireless company, that makes me pause for a moment and reflect on how technology advancements and the work we’re doing is truly impacting life and death situations,” Sievert said. 

The importance of satellite-enabled wireless emergency alerts (WEA) are substantial. During the 2018 Camp Fire in California alone, thousands of people who were affected by the blaze found it very difficult to communicate with loved ones and emergency personnel because the fire destroyed cell towers. Had satellite-enabled wireless emergency alerts been used at the time, the blaze would likely have compromised fewer people. 

Advertisement

Starlink currently has over 175 direct-to-smartphone satellites currently in low-earth orbit, though more are expected to be launched in the coming months. Overall, T-Mobile noted that its successful test “opens up the 500,000 square miles of lightly populated, mountainous and/or uninhabitable land across the country to critical, life-saving emergency alerts.”

Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla Gigafactory Texas builds its half millionth vehicle

The milestone was shared via Twitter/X by the official @Gigafactories account.

Published

on

Credit: Tesla Manufacturing/X

Tesla’s Gigafactory Texas has officially rolled out its 500,000th vehicle, marking a significant achievement in the factory’s history and reinforcing its role as a central hub in Tesla’s vehicle manufacturing network. 

The milestone was shared via Twitter/X by the official @Gigafactories account. “Congratulations to the Giga Texas team for building 500k vehicles,” the company’s X post read.

As could be seen in Tesla Manufacturing’s post, the Gigafactory Texas team celebrated the milestone by posting for a photograph with the facility’s half millionth unit, a white Tesla Model Y. The team held balloons that spelled “500K” on its commemorative photo. 

Giga Texas, located near Austin, has ramped its operations since its launch, producing Tesla’s Cybertruck and Model Y. Crossing the half-million vehicle mark solidifies the facility’s importance to Tesla’s overall operations, especially considering the fact that the Model Y is the company’s best-selling vehicle.

While Giga Texas is just producing the Model Y and the Cybertruck for now, the facility is also poised to produce the Cybercab. The Cybercab is expected to be Tesla’s highest volume vehicle, with Elon Musk estimating that the company would be producing about 2 million units of the autonomous two-seater per year. 

Advertisement

The Cybercab is unlike any vehicle that is currently produced today, and its production would be quite extraordinary. As per Elon Musk’s previous comments, the Cybercab’s manufacturing line would not look like an automotive production line at all. Instead, Musk noted that the Cybercab’s line in Gigafactory Texas would resemble a high-speed consumer electronics line instead.

“We do want to scale up production to new heights obviously with the Cybercab. Cybercab is not just revolutionary car design. It’s also a revolutionary manufacturing process. So I guess we probably don’t talk about that enough, but if you’ve seen the design of the Cybercab line, it doesn’t look like a normal car manufacturing line. It looks like a really high-speed consumer electronics line,” Musk previously stated.

Continue Reading

News

Tesla reportedly places large order for robot parts, hinting that Optimus V3 design is all but finalized

Tesla has reportedly placed a large order of linear actuators for humanoid robots from a Chinese supplier.

Published

on

Credit: Tesla

Tesla might have all but finalized the design for its Optimus V3 humanoid robot, at least if rumors from China prove accurate. As per recent reports, Tesla has reportedly placed a large order of linear actuators for humanoid robots from a Chinese supplier, with deliveries expected sometime in the first quarter of 2026.

The volume of orders suggested by the reports from China suggests that the components will not just be used for Optimus prototypes.

The rumor

As noted in a report from Sina News, media outlets across China have recently reported that Tesla has placed a $685 million (5 billion RMB) order for linear actuators from Sanhua Intelligent Controls. The components will reportedly be used for the production of Optimus, which will likely be mass-produced in its V3 iteration. The reports claimed that the delivery of the actuators will likely start sometime in the first quarter of 2026. 

Industry watchers have estimated that such a volume would be enough for about 180,000 Optimus robots. This suggests that while Tesla might not be able to start the initial production of its humanoid robots this year, the electric vehicle maker might be able to hit the ground running with its Optimus production next year. And as hinted at by Elon Musk’s comments on X, Tesla seems to be preparing to produce Optimus V3 en masse.

https://twitter.com/tslaming/status/1978311791890645146

Company comments

The reports of Tesla’s alleged actuator orders have resulted in Sanhua Intelligent Controls’ stock rising. Interestingly enough, a Tesla China representative has stated that “no official information about this order that could be disseminated externally.” A representative from Sanhua, on the other hand, simply stated that the company’s robotics business is progressing smoothly, but they could not comment on market rumors. 

Advertisement

While these reports are rumors for now, there are some optimistic hints that Tesla might have all but finalized the design for Optimus V3, and the company might be looking to start the robot’s production. For one, Sanhua is already a Tesla supplier, providing components for the company’s electric cars. A report from The Information also alleged that Tesla is no longer looking to produce 5,000 Optimus robots in 2025. This was reportedly due to challenges in the robot’s hands.

If Tesla is really starting to order large volumes of components for Optimus’ production, it would suggest that the company might have overcome the challenges it was facing with the humanoid robot earlier this year. It would then not be farfetched if Tesla were able to start the initial production of Optimus V3 next year.

Continue Reading

News

Tesla eyes two new states for Robotaxi

Published

on

Credit: @TerrapinTerpene/X

Tesla has officially shown that it is eyeing two new states for Robotaxi operation in the U.S., as it hopes to add the new areas to its ever-growing list of places where the suite is either active or in the testing phase.

Tesla first launched its Robotaxi suite in Austin, Texas, in late June. It expanded the suite to the San Francisco Bay Area just a month later. Since then, it has not launched any public rides in any other states, but it has gained several approvals for early testing.

Tesla officially launches Robotaxi service with no driver

In preparation for operation in new states, Tesla routinely lists job postings on its Careers website, which helps align potential employees with opportunities ahead of regulatory approvals. This is a strategy that allows Tesla to start operations immediately upon licensing for testing.

Tesla started hiring Vehicle Operators for Autopilot in Arizona and Nevada months before the company gained any sort of approvals from state governments for Robotaxi. However, those approvals eventually came in the form of testing licenses, which allow the company to perform validation ahead of its public launch.

Tesla begins validating Robotaxi in a new area, hinting at expansion

Now, Tesla has posted job listings for Vehicle Operators for Autopilot in two new states: Colorado and Illinois. The Colorado job listing is located in Aurora, a suburb of Denver. Tesla is looking for Robotaxi operators in Chicago as well.

These postings hint toward Tesla’s continuing efforts to expand Robotaxi to new places. Earlier this year, CEO Elon Musk said the company would like to have Robotaxi available to at least half of the U.S. population.

It has expanded significantly since its initial launch in late June, but it is still a far way off from where Tesla would like it to be by year’s end.

So far, Tesla has job listings for Autopilot Vehicle Operators in Arizona, California, Texas, Florida, Colorado, Nevada, and Illinois.

Continue Reading

Trending