Connect with us

News

Tesla limited edition Cyberhammer goes on sale for $700

Credit: Tesla

Published

on

The Tesla Cybertruck-inspired “Cyberhammer” sledgehammer is back. And this time, fans of the electric vehicle maker can actually purchase the limited edition item for a premium price. 

Tesla describes the Cyberhammer, which is based on the all-electric pickup truck, as follows in its official shop. 

“Ready of not, it’s hammer time. Now avalable to a wider audience, our limited-release Cyberhammer commemorates the Cybertruck unveiling when Franz used a sledgehammer to show the toughness of the vehicle’s stainless-steel exoskeleton. Designed by Tesla Design Studio and made of steel, Cyberhammer features a laser etching of Franz’s signature on the head that makes this piece a true collectible,” Tesla wrote.

The Cyberhammer is currently listed in the Tesla Shop with a price of $700. This is quite a departure from the company’s previous strategy with the item. When the Cybertruck-inspired sledgehammer was initially launched back in March, after all, it was not available for purchase at all. Instead, it was available as a referral award, with customers spending 35,000 referral credits to avail of the item. Tesla confirmed as much when it promoted the item on X, with the EV maker stating that the Cyberhammer was something that was “earned” and “not given.”

While the Cyberhammer is now available for purchase, the company still noted that only 800 pieces of the limited-edition premium item would be built. After all 800 are gone, it would not be surprising if the Cyberhammer becomes as rare as a Boring Company Not-a-Flamethrower, which was sold in January 2018, more than six years ago. Similar to the Not-a-Flamethrower, it would not be surprising if the Cyberhammer also ends up being priced as a premium collectible on sites like eBay. 

While the Cyberhammer is likely a durable item, Tesla does note that the sledgehammer is designed for display or gym use. It is a full-fledged sledgehammer, but Tesla still advises customers who opt to purchase the limited-edition item to not strike hard surfaces with the Cyberhammer. 

Advertisement
-

Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

Elon Musk

Tesla slims Cybertruck offerings to only its most expensive trim

Published

on

Credit: u/dregonzz/Reddit

Tesla has slimmed its Cybertruck offerings to offer only its most expensive trim: the Cyberbeast.

After announcing that the Cybertruck would no longer be produced and the company would wind down manufacturing sometime in the middle of 2027, Tesla started to eliminate some of the configurations offered to customers.

Now, only one remains: the $109,990 Cyberbeast. This is truly what seems like Tesla’s last effort to deter any remaining orders from coming in: eliminate the cheap trims and leave only the high-dollar vehicle within the lineup of Cybertruck options.

Those who want to take advantage of this last-ditch opportunity to own Tesla’s symbolic pickup have to pay to play.

Tesla says the reason for the wind down is truly because of Cybercab and its importance to the future.

Despite cries for Tesla to continue production of the pickup, Musk says it is too difficult to ramp a high-volume line instead of ending the truck altogether. He also says Cybercab is what will take passengers around for the “majority of all miles in any jurisdiction where it is not prohibited by law.”

Tesla is going all in on autonomy, and that’s never been a secret. But the commitment to a two-door, two-seat Cybercab truly limits people from having options for labor or hobbies. It also limits people from having their entire family in a single car.

Parents with even a single child will be required to take multiple vehicles if Cybercab is truly the only option Tesla plans to have.

Elon Musk keeps justifying Tesla Cybertruck’s cancelation, but it’s confusing

Tesla has stated the Robovan will also be in production eventually, but it still does not seem like the most ideal vehicle to own. It seems like it is geared more toward commercial uses, but Tesla might have something in the pipeline for families.

Continue Reading

News

Tesla exec hints at a wild fix for Robotaxi’s biggest weather problem

Tesla VP Lars Moravy says focused lasers could keep robotaxi cameras clear instead of wipers.

Published

on

By

Tesla Cybercab in a rainy Austin, Texas rendering

Tesla may one day use lasers instead of wiper blades to keep its robotaxi cameras clear. Lars Moravy, Tesla’s Vice President of Vehicle Engineering, floated the idea in a new episode of Jay Leno’s Garage released Monday, where he and design chief Franz von Holzhausen walked Leno through the Model Y L.

“If you fire them in a focused area, you can clean the sheet of water and create a barrier,” Moravy said. “When you think about autonomy, it might be a good solution to only clean the area where the camera is.” He added that clearing an entire windshield would take too many lasers to be practical.

The comment brings back one of Tesla’s stranger patents. The company filed for “Pulsed Laser Cleaning of Debris Accumulated on Glass Articles in Vehicles and Photovoltaic Assemblies” in May 2019, and the U.S. Patent Office granted it in September 2021. An updated divisional version was granted on March 31, 2026. The system detects debris on the glass, identifies what it is, and pulses the laser at a calibrated rate so the beam never penetrates deeper than the glass itself. The filing names windshields, side windows, camera lenses and solar panels as possible targets.

Lasers were once rumored for the Cybertruck, which appeared at its November 2019 unveiling with no wipers at all. Tesla eventually settled on a single oversized blade, and Elon Musk admitted the wiper was the part of the truck that troubled him the most. That production line is now scheduled to shut down around mid 2027 to make room for more Cybercab output.

Advertisement
-

What has changed since then is who is in the vehicle. A privately owned car has a driver who can notice a smeared windshield and do something about it. A Cybercab heading to its next pickup has nobody on board to check. Tesla has been chipping away at that problem with conventional hardware. Model Y Robotaxis in Austin were spotted with washers on their side repeater cameras in January, and a lens cleaning patent granted in May describes a fluid and wiper assembly for vehicle cameras and Optimus’ eyes. A laser would remove the fluid and the blades, both of which need regular replacement across a fleet.

The same episode gave Leno his first ride on Full Self-Driving (Supervised). The Model Y L pulled over on its own when an ambulance approached with its sirens on. “We got it on self-driving mode! I’m not touching anything,” Leno said. Moravy and von Holzhausen also explained that owners remain responsible while using FSD (Supervised), while Tesla takes responsibility for Robotaxi rides because it acts as the operator. Tesla launched the Model Y L in the U.S. in July at $61,990.

Moravy gave no timeline, and he described the laser setup as something Tesla is considering rather than a confirmed feature. The fleet it would serve keeps getting bigger, though. Tesla launched unsupervised Robotaxi service in San Antonio on Monday, its eighth city, and expanded its Austin service area to roughly 443 square miles on the same day. Several of those markets, including Houston, Miami and Tampa, see heavy seasonal rain.

Continue Reading

News

Tesla Robotaxi enters its newest city, reaching San Antonio

Published

on

Credit: @AdanGuajardo/X

Tesla launched unsupervised Robotaxi service in San Antonio, Texas, on November 9, 2026, with the first rides beginning at 5 a.m. local time.

The company’s official Robotaxi account on X posted the announcement just after midnight, sharing a map that outlines a large operational zone covering much of the city. The geofence is roughly 274 to 275 square miles, making it Tesla’s largest day-one Robotaxi service area to date.

The zone centers on downtown, covers nearly everything inside Loop 410, and extends north to Loop 1604 between Interstate 10 and U.S. 281, with further reach west past State Highway 151, east beyond I-35, and south toward I-37. This area encompasses about one million residents and hundreds of thousands of jobs.

San Antonio International Airport lies inside the geofence, though Tesla is not currently offering airport pickups or drop-offs. This hopefully will happen soon, as ride-sharing to and from the airport can be expensive.

The launch makes San Antonio Tesla’s eighth unsupervised Robotaxi city and its fifth in Texas, joining Austin, Houston, Dallas, and Fort Worth. Florida markets in Miami, Orlando, and Tampa are also live.

Service uses modified Model Y vehicles operating without a safety driver in the vehicle, consistent with recent unsupervised expansions. Cybercab two-seaters remain limited primarily to Austin for now. It’s worth noting that Dept. of Transportation officials in Texas have already ok’d the Cybercab’s operation in Austin, and one official called it “a tangible example of how quickly our transportation system is evolving.”

San Antonio was previously listed among near-term targets in Tesla’s October 2026 Robotaxi safety materials, alongside Las Vegas, Phoenix, and Jacksonville. The rapid Texas rollout follows Fort Worth’s unsupervised debut on November 2 and builds on Austin’s original launch in June 2025.

The 274-square-mile debut remains substantially larger than Waymo’s local footprint and marks continued progress in Tesla’s unsupervised autonomy efforts after starting the year with no such rides. The company has stated ambitions for broader 24/7 operations by the end of 2026 as vehicle counts and software reliability improve.

Continue Reading