News
SpaceX CEO Elon Musk shows off Starship’s 3 Raptor engines in best photos yet
SpaceX CEO Elon Musk has taken to Twitter to publish yet more photos of the company’s Starship Mk1 rocket prototype, this time posting what are – by far – the best official photos of Raptor engines yet taken.
This marks the first time that a SpaceX prototype of any kind has had more than one Raptor engine installed, a fairly symbolic but still significant milestone that follows in the footsteps of Starhopper’s successful single-engine flight test campaign. With Starhopper now heading into retirement, Starship Mk1 is preparing to support the program’s next major steps: full-scale, high-altitude flight tests powered by three Raptor engines.
The sight of three Raptor engines installed on the first true Starship prototype is undeniably hard to downplay. In barely seven months, SpaceX has gone from the very first static fire of a full-scale Raptor engine – serial number 01 – to flight-testing Raptor SN06 and producing enough engines to bestow Starship Mk1 with its own set of three engines. According to the latest comments from Elon Musk, Starship is meant to be powered by three ‘sea level’ Raptors and three vacuum-optimized Raptors – RVacs. RVac may or may not be ready to support the flight tests of early prototypes like Mk1 and Mk2, meaning that their three SL engines will likely be the sole propulsion for the time being.
Together, three SL Raptors operating at full thrust should be capable of producing up to 600 tons (1.3M lbf) of thrust. Per Musk’s note that Starship Mk1 likely weighs around 200 tons (~450,000 lb) empty, this means that a triple-engined Starship will be able to lift off with up to 400 tons (900,000 lb) of propellant, likely translating into roughly 200-300 seconds of untethered triple-engine operation.
“NOT FOR FLIGHT”
However, the engine installation milestone and subsequent photos are undeniably spectacular, but signs suggest that some level of pragmatism is in order. Visible in two of the three photos published by Musk, all three Raptors still have their transport rings installed just below each engine’s throat. Hardware at the base of one photo indicates that they were likely taken yesterday, on the evening of September 25th. Musk revealed that the three Raptors were installed late on September 22nd, up to three days prior.
Combined, the presence of the transport rings – “NOT FOR FLIGHT”, as their labels note – is a strong indicator that their installation is only temporary, likely in support of Elon Musk’s imminent September 28th Starship presentation. Without more information, it’s impossible to read much further into the temporary installation of Raptors. What it does confirm is that – for any number of reasons – flight-ready Raptors are not quite ready to support the Starship Mk1/Mk2. SpaceX has proven that Raptor is capable of supporting Starhopper for almost a full minute of powered flight, but behaviors observed near the end of that flight suggest that even that may have been pushing the engine’s limits.
All things considered, SpaceX is making progress at an almost unfathomable pace. Just seven months into full-scale Raptor test fires, it’s easy to believe that a lot of development work and refinement remains before the new engine family will be ready to reliably support multi-minute flight tests, let alone orbital launch attempts. Most orbital-class engine development programs aim for tens or even hundreds of thousands of seconds of test fires before attempting their first flights, but SpaceX is not most companies and is sticking closely to its preferred “test as you fly” methods and agile development strategies.
Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.
-->
News
Tesla Model 3 named New Zealand’s best passenger car of 2025
Tesla flipped the switch on Full Self-Driving (Supervised) in September, turning every Model 3 and Model Y into New Zealand’s most advanced production car overnight.
The refreshed Tesla Model 3 has won the DRIVEN Car Guide AA Insurance NZ Car of the Year 2025 award in the Passenger Car category, beating all traditional and electric rivals.
Judges praised the all-electric sedan’s driving dynamics, value-packed EV tech, and the game-changing addition of Full Self-Driving (Supervised) that went live in New Zealand this September.
Why the Model 3 clinched the crown
DRIVEN admitted they were late to the “Highland” party because the updated sedan arrived in New Zealand as a 2024 model, just before the new Model Y stole the headlines. Yet two things forced a re-evaluation this year.
First, experiencing the new Model Y reminded testers how many big upgrades originated in the Model 3, such as the smoother ride, quieter cabin, ventilated seats, rear touchscreen, and stalk-less minimalist interior. Second, and far more importantly, Tesla flipped the switch on Full Self-Driving (Supervised) in September, turning every Model 3 and Model Y into New Zealand’s most advanced production car overnight.
FSD changes everything for Kiwi buyers
The publication called the entry-level rear-wheel-drive version “good to drive and represents a lot of EV technology for the money,” but highlighted that FSD elevates it into another league. “Make no mistake, despite the ‘Supervised’ bit in the name that requires you to remain ready to take control, it’s autonomous and very capable in some surprisingly tricky scenarios,” the review stated.
-->At NZ$11,400, FSD is far from cheap, but Tesla also offers FSD (Supervised) on a $159 monthly subscription, making the tech accessible without the full upfront investment. That’s a game-changer, as it allows users to access the company’s most advanced system without forking over a huge amount of money.
News
Tesla starts rolling out FSD V14.2.1 to AI4 vehicles including Cybertruck
FSD V14.2.1 was released just about a week after the initial FSD V14.2 update was rolled out.
It appears that the Tesla AI team burned the midnight oil, allowing them to release FSD V14.2.1 on Thanksgiving. The update has been reported by Tesla owners with AI4 vehicles, as well as Cybertruck owners.
For the Tesla AI team, at least, it appears that work really does not stop.
FSD V14.2.1
Initial posts about FSD V14.2.1 were shared by Tesla owners on social media platform X. As per the Tesla owners, V14.2.1 appears to be a point update that’s designed to polish the features and capacities that have been available in FSD V14. A look at the release notes for FSD V14.2.1, however, shows that an extra line has been added.
“Camera visibility can lead to increased attention monitoring sensitivity.”
Whether this could lead to more drivers being alerted to pay attention to the roads more remains to be seen. This would likely become evident as soon as the first batch of videos from Tesla owners who received V14.21 start sharing their first drive impressions of the update. Despite the update being released on Thanksgiving, it would not be surprising if first impressions videos of FSD V14.2.1 are shared today, just the same.
-->Rapid FSD releases
What is rather interesting and impressive is the fact that FSD V14.2.1 was released just about a week after the initial FSD V14.2 update was rolled out. This bodes well for Tesla’s FSD users, especially since CEO Elon Musk has stated in the past that the V14.2 series will be for “widespread use.”
FSD V14 has so far received numerous positive reviews from Tesla owners, with numerous drivers noting that the system now drives better than most human drivers because it is cautious, confident, and considerate at the same time. The only question now, really, is if the V14.2 series does make it to the company’s wide FSD fleet, which is still populated by numerous HW3 vehicles.
News
Waymo rider data hints that Tesla’s Cybercab strategy might be the smartest, after all
These observations all but validate Tesla’s controversial two-seat Cybercab strategy, which has caught a lot of criticism since it was unveiled last year.
Toyota Connected Europe designer Karim Dia Toubajie has highlighted a particular trend that became evident in Waymo’s Q3 2025 occupancy stats. As it turned out, 90% of the trips taken by the driverless taxis carried two or fewer passengers.
These observations all but validate Tesla’s controversial two-seat Cybercab strategy, which has caught a lot of criticism since it was unveiled last year.
Toyota designer observes a trend
Karim Dia Toubajie, Lead Product Designer (Sustainable Mobility) at Toyota Connected Europe, analyzed Waymo’s latest California Public Utilities Commission filings and posted the results on LinkedIn this week.
“90% of robotaxi trips have 2 or less passengers, so why are we using 5-seater vehicles?” Toubajie asked. He continued: “90% of trips have 2 or less people, 75% of trips have 1 or less people.” He accompanied his comments with a graphic showing Waymo’s occupancy rates, which showed 71% of trips having one passenger, 15% of trips having two passengers, 6% of trips having three passengers, 5% of trips having zero passengers, and only 3% of trips having four passengers.
The data excludes operational trips like depot runs or charging, though Toubajie pointed out that most of the time, Waymo’s massive self-driving taxis are really just transporting 1 or 2 people, at times even no passengers at all. “This means that most of the time, the vehicle being used significantly outweighs the needs of the trip,” the Toyota designer wrote in his post.
-->Cybercab suddenly looks perfectly sized
Toubajie gave a nod to Tesla’s approach. “The Tesla Cybercab announced in 2024, is a 2-seater robotaxi with a 50kWh battery but I still believe this is on the larger side of what’s required for most trips,” he wrote.
With Waymo’s own numbers now proving 90% of demand fits two seats or fewer, the wheel-less, lidar-free Cybercab now looks like the smartest play in the room. The Cybercab is designed to be easy to produce, with CEO Elon Musk commenting that its product line would resemble a consumer electronics factory more than an automotive plant. This means that the Cybercab could saturate the roads quickly once it is deployed.
While the Cybercab will likely take the lion’s share of Tesla’s ride-hailing passengers, the Model 3 sedan and Model Y crossover would be perfect for the remaining 9% of riders who require larger vehicles. This should be easy to implement for Tesla, as the Model Y and Model 3 are both mass-market vehicles.
Tesla Model 3 named New Zealand’s best passenger car of 2025
Tesla starts rolling out FSD V14.2.1 to AI4 vehicles including Cybertruck
