News
Tesla Giga Berlin installs reptile fences to protect endangered sand lizards
Tesla installed reptile fences in the Grunheide industrial property to protect lizards from migration to the Giga Berlin construction site.
As of Thursday, a double fence has been erected on the south side of the Tesla forest to protect reptiles and other animals that might cross from the nearby woods. Aside from protecting the lizards from being accidentally harmed at the construction site, sand lizards are also protected by European and construction sites must hire experts to catch each animal by snaring them and then resettling them to another location. The relocation of each sand lizard may cost up to 4,000 euros or roughly $4,500. Railway officials in Germany recently spent 15 million euros to relocate sand lizards from a transport hub in Stuttgart.
Tesla enthusiast Tobias Lindh shared on Twitter images of the completed barrier.
- Giga Berlin Reptile Fence (Source: Tobias Lindh | Twitter)
- Giga Berlin Reptile Fence (Source: Tobias Lindh | Twitter)
- Giga Berlin Reptile Fence (Source: Tobias Lindh | Twitter)
- Giga Berlin Reptile Fence (Source: Tobias Lindh | Twitter)
They really make sure that no lizard enters #GigaBerlin pic.twitter.com/cvhykRjLit
— Tobias Lindh (@tobilindh) March 12, 2020
GF4Tesla who has also been closely following the developments at the site of Tesla’s first Gigafactory in Europe, also shared on Twitter recent images taken at the site that show the enclosure that separates the build site from another portion of the forest.
#Speciesprotection 🤲
The reptile fence will be built on the south side of the site to prevent lizards🦎 and vipers🐍 from migrating to the GF4 site from the opposite woods.🌲🌲🌲 pic.twitter.com/1Js4kbqPyz— Gigafactory Berlin News (@Gf4Tesla) March 11, 2020
Earlier this week, the State Environment Agency in Brandenburg gave Tesla the green light to continue with the preparation works at the Giga Berlin construction site while the complete environmental permits are still pending. The approval means Tesla can now remove the topsoil and level the 92 hectares that have been cleared for the first phase of its construction.
The construction of the reptile fences is consistent with the environmental protection plan presented by Tesla to the Brandenburg government, concerned environmental groups, and local residents. During the construction of Giga Berlin, Tesla will resettle reptiles and other animals found in the site following the recommendations of experts in the country.
In addition to the protective fences to keep reptiles away, Tesla have also clearly marked areas where wood ant nests are located. The wood ants are also tagged as endangered species. The ant colonies should be first resettled before leveling those specific portions of the cleared Giga Berlin property.
Tesla can level the area now. The State Office for the Environment has issued the appropriate permit.
Bat trees must remain standing until the animals have left their winter quarters.
Even areas with wood ants' nests can only be levelled after the nests have been resettled. pic.twitter.com/gSRwA6xU9F— Gigafactory Berlin News (@Gf4Tesla) March 10, 2020
Trees with bats were also not uprooted to allow the animals to complete their winter hibernation. Experts assured concerned citizens that the engine noise, loud trucks, and noise created by chainsaws in the construction site will not be harmful to the bats. The endangered bats in the Grunheide forest started their hibernation in February and will likely last until the end of March as their mating season begins.
“You don’t have to worry about the animals. Bats are slowly waking up and leaving their winter accommodations,” said Peter Busse from the Working Group on Bats in Saxony-Anhalt who has been volunteering for the protection of animals for 40 years.
In January, Tesla CEO Elon Musk assured the public that Tesla will be built with sustainability and the environment in mind.
Giga Berlin / GF4 will absolutely be designed with sustainability and the environment in mind
— Elon Musk (@elonmusk) January 25, 2020
News
Tesla rolls out new Supercharging safety feature in the U.S.
Tesla has rolled out a new Supercharging safety feature in the United States, one that will answer concerns that some owners may have if they need to leave in a pinch.
It is also a suitable alternative for non-Tesla chargers, like third-party options that feature J1772 or CCS to NACS adapters.
The feature has been available in Europe for some time, but it is now rolling out to Model 3 and Model Y owners in the U.S.
With Software Update 2026.2.3, Tesla is launching the Unlatching Charge Cable function, which will now utilize the left rear door handle to release the charging cable from the port. The release notes state:
“Charging can now be stopped and the charge cable released by pulling and holding the rear left door handle for three seconds, provided the vehicle is unlocked, and a recognized key is nearby. This is especially useful when the charge cable doesn’t have an unlatch button. You can still release the cable using the vehicle touchscreen or the Tesla app.”
The feature was first spotted by Not a Tesla App.
This is an especially nice feature for those who commonly charge at third-party locations that utilize plugs that are not NACS, which is the Tesla standard.
For example, after plugging into a J1772 charger, you will still be required to unlock the port through the touchscreen, which is a minor inconvenience, but an inconvenience nonetheless.
Additionally, it could be viewed as a safety feature, especially if you’re in need of unlocking the charger from your car in a pinch. Simply holding open the handle on the rear driver’s door will now unhatch the port from the car, allowing you to pull it out and place it back in its housing.
This feature is currently only available on the Model 3 and Model Y, so Model S, Model X, and Cybertruck owners will have to wait for a different solution to this particular feature.
News
LG Energy Solution pursuing battery deal for Tesla Optimus, other humanoid robots: report
Optimus is expected to be one of Tesla’s most ambitious projects, with Elon Musk estimating that the humanoid robot could be the company’s most important product.
A recent report has suggested that LG Energy Solution is in discussions to supply batteries for Tesla’s Optimus humanoid robot.
Optimus is expected to be one of Tesla’s most ambitious projects, with Elon Musk estimating that the humanoid robot could be the company’s most important product.
Humanoid robot battery deals
LG Energy Solution shares jumped more than 11% on the 28th after a report from the Korea Economic Daily claimed that the company is pursuing battery supply and joint development agreements with several humanoid robot makers. These reportedly include Tesla, which is developing Optimus, as well as multiple Chinese robotics companies.
China is already home to several leading battery manufacturers, such as CATL and BYD, making the robot makers’ reported interest in LG Energy Solution quite interesting. Market participants interpreted the reported outreach as a signal that performance requirements for humanoid robots may favor battery chemistries developed by companies like LG.
LF Energy Solution vs rivals
According to the report, energy density is believed to be the primary reason humanoid robot developers are evaluating LG Energy Solution’s batteries. Unlike electric vehicles, humanoid robots have significantly less space available for battery packs while requiring substantial power to operate dozens of joint motors and onboard artificial intelligence processors.
LG Energy Solution’s ternary lithium batteries offer higher energy density compared with rivals’ lithium iron phosphate (LFP) batteries, which are widely used by Chinese EV manufacturers. That advantage could prove critical for humanoid robots, where runtime, weight, and compact packaging are key design constraints.
News
Tesla receives approval for FSD Supervised tests in Sweden
Tesla confirmed that it has been granted permission to test FSD Supervised vehicles across Sweden in a press release.
Tesla has received regulatory approval to begin tests of its Full Self-Driving Supervised system on public roads in Sweden, a notable step in the company’s efforts to secure FSD approval for the wider European market.
FSD Supervised testing in Sweden
Tesla confirmed that it has been granted permission to test FSD Supervised vehicles across Sweden following cooperation with national authorities and local municipalities. The approval covers the Swedish Transport Administration’s entire road network, as well as urban and highways in the Municipality of Nacka.
Tesla shared some insights into its recent FSD approvals in a press release. “The approval shows that cooperation between authorities, municipalities and businesses enables technological leaps and Nacka Municipality is the first to become part of the transport system of the future. The fact that the driving of the future is also being tested on Swedish roads is an important step in the development towards autonomy in real everyday traffic,” the company noted.
With approval secured for FSD tests, Tesla can now evaluate the system’s performance in diverse environments, including dense urban areas and high-speed roadways across Sweden, as noted in a report from Allt Om Elbil. Tesla highlighted that the continued development of advanced driver assistance systems is expected to pave the way for improved traffic safety, increased accessibility, and lower emissions, particularly in populated city centers.
Tesla FSD Supervised Europe rollout
FSD Supervised is already available to drivers in several global markets, including Australia, Canada, China, Mexico, New Zealand, and the United States. The system is capable of handling city and highway driving tasks such as steering, acceleration, braking, and lane changes, though it still requires drivers to supervise the vehicle’s operations.
Tesla has stated that FSD Supervised has accumulated extensive driving data from its existing markets. In Europe, however, deployment remains subject to regulatory approval, with Tesla currently awaiting clearance from relevant authorities.
The company reiterated that it expects to start rolling out FSD Supervised to European customers in early 2026, pending approvals. It would then be unsurprising if the company secures approvals for FSD tests in other European territories in the coming months.



