Connect with us

News

SpaceX CEO Elon Musk's latest Starship photos reveal surprise landing legs [confirmed]

First spotted by a local resident and photographer, photos from Elon Musk later confirmed that Starship SN3 already has six stubby landing legs installed. (NASASpaceflight - bocachicagal)

Published

on

Update: In a Twitter response to Teslarati’s report, Musk confirmed that SpaceX has already installed six telescoping landing legs on the Starship SN3 prototype.

CEO Elon Musk published new photos of a Starship prototype shortly after it was moved to SpaceX’s South Texas launch pad, revealing the surprise inclusion of already-installed landing legs and hinting at the growing maturity of the rocket’s design.

Published on March 30th and likely taken late on March 29th, Musk’s latest Starship photos offer the best look yet at the massive vehicle’s engine section, where Raptor engines may soon be installed for historic static fire and hop test attempts. First captured in photos taken by local photographer and resident Mary (bocachicagal) on March 28th, speculation about what appeared to be six odd legs immediately kicked off on spaceflight forums. Due to limited publicly-available perspectives and the appendages’ locations inside Starship’s cavernous engine section, there was some limited ambiguity as to whether the steel pieces were truly legs or something closer to general structural support.

Thankfully, Musk’s new photos all but confirmed the former theory, revealing a sextet of hinged legs with a curious stubby appearance and what appears to be a rather simple and elegant design. Most importantly, the unexpected presence of landing legs – while likely cheap to implement – suggests that SpaceX is growing increasingly confident in each subsequent Starship prototype, an encouraging sign for imminent static fire and hop test plans.

Shortly after technicians transported Starship SN3 to the launch pad, SpaceX CEO Elon Musk revealed that landing legs – barely visible here – were already installed on the rocket. (NASASpaceflight – bocachicagal)

In fact, SpaceX filed a Notice to Airmen (NOTAM) with the Federal Aviation Administration (FAA) on March 30th — the biggest confirmation yet that the company is seriously working to prepare Starship SN3 for a Raptor engine static fire test as early as April 1st. Backup dates on the 2nd, 3rd, and 4th are included, leaving a decent amount of breathing room for SpaceX’s Texas team to (hopefully) successfully complete the rocket’s proof test in the next few days.

Possibly preceded by a water pressure test to check for leaks and verify general structural integrity, Starship SN3’s proof test will see the rocket’s methane and oxygen tanks fully filled with cryogenic liquid nitrogen. The tank pressure would then be increased to around 6-8 bar (90-115 psi) to ensure that Starship can handle the thermal and pressure stresses it will experience during launches. Given SpaceX’s recent history, including a partially unintentional Starship Mk1 tank failure in November 2019, the intentional destruction of two Starship test tanks in January 2020, and Starship SN1’s unintentional February 2020 failure, success is still far from guaranteed for Starship SN3.

Advertisement
-->
Starship SN3’s legs and engine section are pictured on March 28th as technicians lift it onto SpaceX’s Boca Chica, Texas launch mount. (NASASpaceflight – bocachicagal)
SpaceX CEO Elon Musk’s March 30th photos captured four of Starship SN3’s six surprise landing legs, visible as the shiny, squarish appendages in the right-hand image. (Elon Musk/SpaceX)

Nevertheless, SpaceX seems more confident in Starship SN3 than it was in Starships Mk1 and SN1 – the only other full-scale prototypes to have reached the testing phase. It’s possible that including leg prototypes were cheap and easy enough to be worth installing regardless of SpaceX’s broader confidence in Starship SN3 as a whole. However, it would still be a clear waste of time and resources to install all six landing legs if the internal consensus was to expect a failure in the early phases of SN3 testing.

SpaceX, in other words, seems to believe that Starship SN3 will pass its imminent tank proof test without any major issues. Additionally, the company must be confident in the outcome of the Starship SN3 Raptor static fire(s) expected to immediately follow any successful proof test. SpaceX has successfully demonstrated Raptor several times on flight hardware with the help of the Starhopper development vehicle, but a full-scale Starship is arguably a different animal.

SpaceX is just a day or so away from Starship SN3’s critical tank proof test. (NASASpaceflight – bocachicagal)

Regardless, it’s now clearer than ever that SpaceX is confident enough to put a few eggs in the Starship SN3 basket. With landing legs installed, the massive rocket prototype could be ready for a Starhopper-style 150m (500 ft) hop test just a week or so from now. For now, though, Starship SN3 needs to pass a tank proof test, perform a wet dress rehearsal (WDR) with real propellant, and complete one or several Raptor static fires before a flight test will be in its cards. Stay tuned!

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

Elon Musk

Tesla CEO Elon Musk shades Waymo: ‘Never really had a chance’

Published

on

Credit: Tesla

Tesla CEO Elon Musk shaded Waymo in a post on X on Wednesday, stating the company “never really had a chance” and that it “will be obvious in hindsight.”

Tesla and Waymo are the two primary contributors to the self-driving efforts in the United States, with both operating driverless ride-hailing services in the country. Tesla does have a Safety Monitor present in its vehicles in Austin, Texas, and someone in the driver’s seat in its Bay Area operation.

Musk says the Austin operation will be completely void of any Safety Monitors by the end of the year.

With the two companies being the main members of the driverless movement in the U.S., there is certainly a rivalry. The two have sparred back and forth with their geofences, or service areas, in both Austin and the Bay Area.

While that is a metric for comparison now, ultimately, it will not matter in the coming years, as the two companies will likely operate in a similar fashion.

Waymo has geared its business toward larger cities, and Tesla has said that its self-driving efforts will expand to every single one of its vehicles in any location globally. This is where the true difference between the two lies, along with the fact that Tesla uses its own vehicles, while Waymo has several models in its lineup from different manufacturers.

The two also have different ideas on how to solve self-driving, as Tesla uses a vision-only approach. Waymo relies on several things, including LiDAR, which Musk once called “a fool’s errand.”

This is where Tesla sets itself apart from the competition, and Musk highlighted the company’s position against Waymo.

Jeff Dean, the Chief Scientist for Google DeepMind, said on X:

“I don’t think Tesla has anywhere near the volume of rider-only autonomous miles that Waymo has (96M for Waymo, as of today). The safety data is quite compelling for Waymo, as well.”

Musk replied:

“Waymo never really had a chance against Tesla. This will be obvious in hindsight.”

Tesla stands to have a much larger fleet of vehicles in the coming years if it chooses to activate Robotaxi services with all passenger vehicles. A simple Over-the-Air update will activate this capability, while Waymo would likely be confined to the vehicles it commissions as Robotaxis.

Continue Reading

News

Tesla supplier Samsung preps for AI5 production with latest move

According to a new report from Sedaily, Samsung is accelerating its preparation for U.S. production of the AI5 chips by hiring veteran engineers for its Customer Engineering team.

Published

on

Credit: Tesla

Tesla supplier Samsung is preparing to manufacture the AI5 chip, which will launch the company’s self-driving efforts even further, with its latest move.

According to a new report from Sedaily, Samsung is accelerating its preparation for U.S. production of the AI5 chips by hiring veteran engineers for its Customer Engineering team, which will help resolve complex foundry challenges, stabilize production and yields, and ensure manufacturing goes smoothly for the new project.

The hiring push signals that Tesla’s AI5 project is moving forward quickly at Samsung, which was one of two suppliers to win a contract order from the world’s leading EV maker.

TSMC is the other. TSMC is using its 3nm process, reportedly, while Samsung will do a 2nm as a litmus test for the process.

The different versions are due to the fact that “they translate designs to physical form differently,” CEO Elon Musk said recently. The goal is for the two to operate identically, obviously, which is a challenge.

Some might remember Apple’s A9 “Chipgate” saga, which found that the chips differed in performance because of different manufacturers.

The AI5 chip is Tesla’s next-generation hardware chip for its self-driving program, but it will also contribute to the Optimus program and other AI-driven features in both vehicles and other projects. Currently, Tesla utilizes AI4, formerly known as HW4 or Hardware 4, in its vehicles.

Tesla teases new AI5 chip that will revolutionize self-driving

AI5 is specialized for use by Tesla as it will work in conjunction with the company’s Neural Networks, focusing on real-time inference to make safe and logical decisions during operation.

Musk said it was an “amazing design” and an “immense jump” from Tesla’s current AI4 chip. It will be roughly 40 times faster, and have 8 times the raw compute, with 9 times the memory capacity. It is also expected to be three times as efficient per watt as AI4.

AI5 will make its way into “maybe a small number of units” next year, Musk confirmed. However, it will not make its way to high-volume production until 2027. AI5 is not the last step, either, as Musk has already confirmed AI6 would likely enter production in mid-2028.

Continue Reading

News

Tesla discloses interesting collaboration partner for Supercharging

This BOXABL collaboration would be a great way to add a rest stop to a rural Supercharging location, and could lead to more of these chargers across the U.S. 

Published

on

Credit: Grok

Tesla disclosed an interesting collaboration partner in an SEC filing, which looks like an indication of a potential project at Supercharger sites.

Tesla said on Tuesday in the filing that it was entering an agreement with BOXABL to design and build a Micromenity structure. Simply put, this is a modular building, usually a few hundred square feet in size, and it has been seen at Superchargers in Europe.

In Magnant, France, Tesla opened a small building at a Supercharger that is available to all EV owners. There are snacks and drinks inside, including ice cream, coffee, a gaming console, and restrooms. It gives people an opportunity to get up and out of their cars while charging.

This building was not built by BOXABL, but instead by bk World Lounges. It is likely the final Supercharging stop before people get to Paris, as it is located 250 kilometers, or 155 miles, from the City of Light.

 

Voir cette publication sur Instagram

 

Une publication partagée par Gerold Wolfarth (@gerold_wolfarth)

Magnant has 56 stalls, so it is a large Supercharging stop compared to most. The building could be a sign of things to come, especially as Tesla has opened up larger Supercharger stations along major roadways.

It is for just a single building, as the Scope of Work within the filing states “a comprehensive package for one Micromenity building.”

Superchargers are commonly located at gas stations, shopping centers, and other major points of interest. However, there are some stops that are isolated from retail or entertainment.

This BOXABL collaboration would be a great way to add a rest stop to a rural Supercharging location, and could lead to more of these chargers across the U.S.

Tesla has done a lot of really great things for Supercharging this year.

Along with widespread expansion, the company launched the “Charging Passport” this week, opened the largest Supercharger in the world in Lost Hills, California, with 168 chargers, opened the Tesla Diner, a drive-in movie restaurant in Los Angeles, and initiated access to the infrastructure to even more automakers.

Continue Reading