News
SpaceX’s second flight-proven Starship makes way for next ‘test tank’
Four days after the rocket’s hop debut, SpaceX has safely returned its second flight-proven Starship prototype to an assembly building for refurbishment, making way for a new ‘test tank’ at the launch pad.
Known as Starship serial number six (SN6), the ~30m (~100 ft) tall prototype became the second full-scale Starship to take flight on September 3rd, following in SN5’s footsteps to reach a similar ~150m (~500 ft) apogee before gently landing. More or less identical to SN5’s own August 4th hop debut, it marked the second hop of an entirely separate Starship prototype in 30 days – a feat almost certainly unprecedented in the history of large-scale rocket development.
Significant work remains to speed up the post-hop process, which appears to currently amount to some ~48 hours of gradual, uncontrolled detanking and depressurization. Regardless, a bit least than four days after a successful launch and landing, Starship SN6 was rolled back to SpaceX’s Boca Chica, Texas production facilities around 9am CDT, September 7th. Just five hours after that, Starship test tank SN7.1 – the second in a planned series of two – was loaded onto the same transporter and shipped down the road to the launch pad.
Since its first hop, over the last 30 days, SpaceX has inspected and refurbished Starship SN5 to help support what CEO Elon Musk has described as “several short hops to smooth out [the] launch process.” SN6’s success (and the intact launch infrastructure it thus left behind) now means that SN5 will almost certainly be reused in the near future. It’s unclear how many hops will be needed for Starship launch operations to be optimized into a smooth process but 4+ (2 x SN5, 2 x SN6) seems to be a safe bet.
However, SN5’s second hop will have to wait. Up next on SpaceX’s South Texas manifest is the fifth in a series of intentionally destructive tank tests, used to qualify (or disqualify) new Starship designs, manufacturing techniques, and materials. Known as Starship SN7.1, this particular test tank is the second in a series of two meant to determine the capabilities of a new steel alloy.
The first tank, SN7, was (successfully) tested to destruction on June 23rd and is believed to have reached record pressures before it failed. Perhaps more importantly, an unintentional leak during one of SN7’s first pressure test attempts proved that the new 304L (-ish) steel alloy it was built out of would make certain failure modes far less catastrophic (i.e. a leak instead of a violent rupture).
SN7 was a single basic test tank: an upper dome, lower dome, and three steel rings. SN7.1 is significantly more complex, adding a skirt section with hold-down clamps at the base and replacing the aft tank dome with a thrust dome and thrust puck (Raptor engine attachment points). SN7 was simply loaded with cryogenic liquid nitrogen and pressurized. SN7.1 – thanks to the addition of a thrust puck and skirt section – will perform similar cryo pressure tests but will also be subject to the simulated thrust of three Raptor engines with a series of hydraulic rams.
As of now, SpaceX has road closures scheduled today and tomorrow (Sept 8th) from 8am to 8pm CDT – tomorrow likely being the earliest opportunity for SN7.1 testing to begin.
Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.
News
Tesla Semi gets new product launch as mass manufacturing hits Plaid Mode
While the 1.2 MW Megacharger handles quick 30-minute en-route boosts, the Basecharger serves as a reliable overnight solution for longer dwell times at warehouses, distribution centers, fleet yards, and even, potentially, homes.
The Tesla Semi is getting a new production launch as mass manufacturing on the all-electric truck is gearing up to hit Plaid Mode.
Tesla has introduced a game-changing addition to its commercial charging lineup with the new 125 kW Basecharger for Semi. Launched this week as part of the new “Semi Charging for Business” program, this compact unit is purpose-built for depot and overnight charging of Tesla Semi trucks.
While the 1.2 MW Megacharger handles quick 30-minute en-route boosts, the Basecharger serves as a reliable overnight solution for longer dwell times at warehouses, distribution centers, fleet yards, and even, potentially, homes.
Our new 125 kW Basecharger is designed for longer dwell times and overnight charging of Semis. It’s the “home charging” for heavy-duty fleets.
It features a fully integrated design that eliminates the need for a separate AC-to-DC cabinet, simplifying installation. The 6 meter… https://t.co/ovy1C4PsRW pic.twitter.com/vBUCNMzs57
— Tesla Charging (@TeslaCharging) May 1, 2026
Delivering up to 60 percent of the Semi’s range in roughly four hours, perfect for overnight top-ups during mandated driver rest periods or while trucks are loaded or unloaded. Its fully integrated design eliminates the need for bulky separate AC-to-DC cabinets.
Tesla engineers tucked one of the power modules from a V4 Supercharger Cabinet directly inside the sleek post, resulting in a compact footprint. It also features a six-meter cable for layout flexibility. This is one thing that must have been learned through the V4 Supercharger rollout.
Installation and operating costs drop dramatically thanks to daisy-chaining. Up to three Basechargers can share a single 125 kVA breaker, slashing electrical infrastructure requirements. The unit outputs 150 amps continuous across an 180–1,000 VDC range, matching the Semi’s high-voltage architecture while supporting the MCS 3.2 standard.
Tesla Semi sends clear message to Diesel rivals with latest move
Priced from $40,000 for a minimum order of two units, the Basecharger is far more affordable than the $188,000 Megacharger setup for two posts. Deliveries begin in early 2027. Buyers also receive Tesla’s full network-level software, remote monitoring, maintenance, and a guaranteed 97 percent or higher uptime—critical for fleet reliability.
This launch arrives as Tesla accelerates high-volume Semi production at its Nevada factory, targeting 50,000 units annually. By pairing affordable depot charging with ultra-fast highway options, Tesla removes one of the biggest obstacles to electrifying Class 8 trucking: infrastructure cost and complexity.
Fleet operators stand to gain lower electricity rates during off-peak hours, dramatically reduced maintenance compared to diesel, and quieter yards at night. The Basecharger isn’t just another charger—it’s the practical bridge that makes large-scale electric semi adoption economically viable.
With the Basecharger handling “home” duties and Megachargers powering the road, Tesla is delivering a complete ecosystem that could finally tip the scales toward zero-emission freight. For trucking companies ready to go electric, the future just got a whole lot more charger-friendly.
News
Tesla revises new Intervention Reporting system with Full Self-Driving
It is the second revision to the program as Tesla is trying to make it easier to decipher driver and owner complaints, but also to make it easier to report issues within the suite for them.
Tesla has revised its new Intervention Reporting system within the Full Self-Driving suite that now categorizes reasons that drivers take over when the semi-autonomous driving functionality is active.
It is the second revision to the program as Tesla is trying to make it easier to decipher driver and owner complaints, but also to make it easier to report issues within the suite for them.
With the initial rollout of Full Self-Driving v14.3.2, Tesla included a new reporting menu that gave four options for an intervention: Preference, Comfort, Critical, and Other. A slightly revised version of Full Self-Driving with the same ID number then came out a few days later, changing the “Other” option to “Navigation” after numerous complaints from owners.
It appears Tesla has listened to those owners once again and has not only made it smaller and more compact, but also easier to report the issues than previously.
The new menu is now embedded within the request for a Voice Memo from Tesla, and does not block the entire screen, as the second rollout of the menu was:
Thank you Tesla! The new intervention screen is much better! @Tesla_AI pic.twitter.com/1lea9G27N1
— Dirty Tesla (@DirtyTesLa) May 1, 2026
There will likely be one additional revision to the Interventions Menu, as we have coined it here at Teslarati.
Unfortunately, at times, there are no reasons for an intervention at all, but the menu does not give an option to simply disregard the reporting and forces the driver to choose one of the options. We, as well as other notable Tesla influencers, indicated that there is not always a reason for an intervention.
For example, I choose to back into my parking spot in my neighborhood at least some of the time for the reason of charging. I usually hit “Preference” for this, but it sends a false positive to Tesla that there was a reason I took over that I was unhappy with.
Tesla begins probing owners on FSD’s navigation errors with small but mighty change
Instead, I’m simply performing a maneuver that is not yet available to us. When Tesla allows drivers to choose the orientation at which their car enters a parking spot, I and many others won’t have to deal with this menu.
Others are still skeptical that it will help resolve any issues whatsoever and prefer to disregard the menu altogether. It does seem as if Tesla will issue another revision in the coming days to allow this to happen.
Lifestyle
California hits Tesla Cybercab and Robotaxi driverless cars with new law
California just gave police power to ticket driverless cars, including Tesla’s Cybercab fleet.
California DMV formally adopted new rules on April 29, 2026 that allow law enforcement to issue “notices of noncompliance”, or in other words ticket autonomous vehicle companies when their cars commit moving violations. The rules take effect July 1, 2026 and officially closes a regulatory gap that previously let driverless cars operate on public roads with nearly no traffic enforcement consequences.
Until now, state traffic laws only applied to human “drivers,” which meant that when no person was behind the wheel, police had no mechanism to issue a ticket. Officers were limited to citing driverless vehicles for parking violations only. A well-known example came in September 2025, when a San Bruno officer watched a Waymo robotaxi execute an illegal U-turn and could do nothing but notify the company.
Under the new framework, when an officer observes a violation, the autonomous vehicle company is effectively treated as the driver. Companies must report each incident to the DMV within 72 hours, or 24 hours if a collision is involved. Repeated violations can result in fleet size restrictions, operational suspensions, or full permit revocation. Local officials also gained new authority to geofence driverless vehicles out of active emergency zones within two minutes and require a live emergency response line answered within 30 seconds.
Tesla Cybercab ramps Robotaxi public street testing as vehicle enters mass production queue
California’s new enforcement rules arrive at a pivotal moment for Tesla. The company is ramping Cybercab production at Giga Texas toward hundreds of units per week, targeting at least 2 million units annually at full capacity, while simultaneously pushing to expand its Robotaxi service to dozens of U.S. cities by end of 2026. Unsupervised FSD for consumer vehicles is currently targeted for Q4 2026, and when it arrives, Tesla’s fleet may not have a human to absorb legal accountability, under the July 1 rules.
Tesla has confirmed plans to expand its Robotaxi service to seven new cities in the first half of 2026, including Dallas, Houston, Phoenix, Miami, Orlando, Tampa, and Las Vegas, with the service already running without safety drivers in Austin. Musk has said he expects robotaxis to cover between a quarter and half of the United States by end of year.
Tesla Semi gets new product launch as mass manufacturing hits Plaid Mode
Tesla revises new Intervention Reporting system with Full Self-Driving
