Connect with us

News

SpaceX Falcon 9 rocket ties turnaround record, nears 1000 Starlink satellites launched

SpaceX has successfully launched its 895th Starlink satellite while simultaneously tying Falcon 9's booster turnaround record. (SpaceX)

Published

on

SpaceX has successfully completed its 14th Starlink v1.0 launch less than a year after operational flights began and simultaneously tied its own world record for orbital-class rocket turnaround.

On the heels of an unusual 48-hour delay SpaceX says it used to double check that a minor Falcon 9 second stage camera issue was not indicative of deeper flaws, the rocket ultimately lifted off at 11:31 am EDT (15:31 UTC) from SpaceX’s Cape Canaveral Air Force Station (CCAFS) LC-40 pad. As usual, 60 Starlink v1.0 satellites – weighing some 16 metric tons (~35,000 lb) – were loaded inside the payload fairing installed atop Falcon 9’s expendable second stage.

Two and a half minutes after liftoff, Falcon 9 booster B1060 shut down its nine Merlin 1D engines and detached from the second stage, immediately flipping itself around to face those engines towards its landing target. The second stage ignited its Merlin Vacuum (MVac) engine seconds later, burning towards an initial low Earth parking orbit for a six minutes. Thirty seconds prior to second engine cutoff (SECO-1), booster B1060 ignited its center Merlin 1D engine and slowed itself to a bullseye landing aboard drone ship Just Read The Instructions – tying the SpaceX-held world-record for orbital-class rocket turnaround.

Falcon 9 booster B1060 streaks through vacuum towards drone ship JRTI as the rocket’s payload fairing jettisons to expose 60 new Starlink satellites, followed by MVac’s burn towards orbit. (SpaceX)

For reusable rockets, that turnaround record refers to the time between two orbital-class launches with the same vehicle – in this case, Falcon 9 booster B1060. The SpaceX rocket managed to launch two separate Starlink missions – Starlink-11 and Starlink-14 – just 51 days, 2 hours, and 45 minutes, narrowly missing Falcon 9 booster B1058’s record by a measly 37 minutes.

Had SpaceX managed to avoid three days of delays, Starlink-14 would have seen B1060 break B1058’s record by three days. Ultimately, the competition is almost entirely symbolic, given that SpaceX effectively has a monopoly over reusable orbital-class launch capabilities and will almost inevitably continue to beat its own records as it grows to become the world’s foremost expert in reusable rocketry.

Advertisement
B1058 set the current world record when it launched ANASIS II just 51.08 days after sending Crew Dragon and two NASA astronauts on their way to orbit. (Richard Angle)

B1060’s Starlink-14 launch and landing represents the 63rd time SpaceX has successfully landed a Falcon booster, as well as the 55th orbital launch to include a successful booster landing and 43rd mission to use a flight-proven rocket. Including Falcon 1 and Falcon Heavy, Starlink-14 also marked SpaceX’s 100th successful launch since the company’s first success in September 2008.

As of October 24th, SpaceX has now launched an incredible 895 Starlink satellites in 17 months. (SpaceX)

If all 60 Starlink-14 satellites manage to boost up to their final orbits, SpaceX will soon have a constellation of more than 800 operational communications satellites – perhaps just three launches away from crossing the 1000-satellite mark. Typically averaging a boost of 6 km (3.7 mi) in orbital altitude every day, each batch of Starlink satellites takes approximately 30-60 days to reach their operational orbits and join the rest of the fleet. SpaceX has already indicated that the first public Starlink beta tests will begin to rollout once Starlink-13 satellites are operational – a milestone they will likely cross in November.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Tesla expands ridesharing service in California to new hotspot

Published

on

Credit: Tesla

Tesla has extended its Bay Area ride-hailing service to include pickups and drop-offs at San Francisco International Airport (SFO). The update, shared via the company’s official channels on July 21, allows users in the region to request rides directly to and from one of California’s busiest airports.

The expansion builds on Tesla’s secured limousine permit for SFO operations. Public records show the permit became effective March 20, 2026, and remains active through January 31, 2027. Tesla vehicles operating the service now display authorized limousine permits issued by the City and County of San Francisco.

Tesla’s ride-hailing program in California relies on Model Y vehicles equipped with Full Self-Driving (Supervised) technology. Human safety drivers remain present in compliance with state regulations, distinguishing the service from fully driverless operations.

The Bay Area geofence covers a broad area spanning north of San Francisco to south of San Jose, offering extensive connectivity across the region.

UPDATE: Elon Musk reveals why Tesla didn’t say ‘Robotaxi’ upon California launch

This SFO addition follows earlier progress at other Bay Area airports. Tesla previously expanded service to San Jose Mineta International Airport (SJC) in late 2025. The company had engaged with SFO, SJC, and Oakland International Airport officials as early as September 2025 to secure necessary approvals for passenger transport.

The service provides a new option for travelers seeking electric, app-based transportation integrated with Tesla’s ecosystem. Rides are booked through Tesla’s dedicated ride-hailing application, which handles matching, routing, and payments. Pricing follows standard ride-hailing models, with potential adjustments based on distance, time, and demand.

Tesla’s California ride-hailing program launched in July 2025 with an initial invite-only rollout in the Bay Area. It started alongside operations in Austin, Texas, marking the company’s second major U.S. market.

The Bay Area remains a primary focus in California, with service centered on high-demand corridors connecting residential, commercial, and now major transportation hubs. This latest airport integration represents a practical step in Tesla’s broader mobility ambitions within the state.

Continue Reading

News

Tesla reveals 2026 Summer Update with crazy fixes to Nav and more

Published

on

Credit: Tesla

Tesla has officially revealed its 2026 Summer Update, which comes with a variety of crazy new features, including Navigation fixes that owners have been wanting for months.

Tesla routinely releases a larger update with the Spring, Summer, Fall, and Winter updates, where it ships a variety of new features, bug fixes, and other additions to customer cars.

The 2026 Spring Update featured things like “Hey Grok” voice assistance, a redesigned self-driving app, Unreal Engine visual upgrades, and more.

Tesla’s Summer Release has about ten new features; we’ll show you each and detail them below:

New Grok Voice Commands

“Grok can now make phone calls, search and play music, adjust climate, open the glovebox, and answer questions about your Tesla.”

Self-Driving Stats in Mobile App

“View and share self-driving stats from the mobile app.”

Caraoke With Scoring

“Caraoke now scores your singing while in Park. High scores are saved to your Tesla profile.”

Automatic Navigation

“Automatic Navigation now adapts to your routine.

Advertisement



In addition to Home, Work, and upcoming calendar events, your vehicle can now suggest and route to places you visit regularly – like a school drop-off on the way to work, or the gym on the way home.”

Preferred Routes

“For a more personalized experience, navigation now prioritizes routes that you’ve taken before”

Set Arrival Energy from Mobile App

“Set your desired Arrival Energy from your phone.”

Send Custom Wraps from Mobile App

“Skip the USB drive and upload a custom wrap of your car from the mobile app. Instructions for creating a custom wrap here: https://github.com/teslamotors/custom-wraps.”

Rear Display Lock

“Kids can watch content on the rear screen, but only the front row can control it through the rear screen app.”

Advertisement



Other Improvements

  • Find Superchargers by name when searching for a destination
  • Add Apple Music songs to queue from search and artist page
  • Set your preferred zoom level for the Self-Driving visualization
  • Intro animations for new Model 3 and Y
Continue Reading

News

Tesla’s reason for Starlink integration on Cybercab might surprise you

Published

on

Credit: Tesla

Tesla’s reason for Starlink integration on Cybercab might surprise you, as the company’s Head of AI, Ashok Elluswamy, finally shed some light on the reason they are putting a satellite internet terminal on its ride-hailing-geared vehicle.

On Monday, Tesla officially confirmed that it would integrate Starlink V5 terminals into Cybercab vehicles, something many Tesla fans had figured the company would do, as the vehicle is primarily geared toward giving rides without any passenger intervention.

The ability to access the internet would allow riders to work or play in the car with their devices. It seemed like a more-than-reasonable feature to add to the Cybercab, which made its way off the production lines for the first time earlier this year.

Tesla reveals first vehicle model to receive Starlink integration

However, the move is not for the rider, as Elluswamy confirmed on Monday night. Instead, it’s actually for Tesla to be able to have a constant connection to the cars in the Robotaxi fleet so it can troubleshoot issues, contact riders, or resolve other issues.

Elluswamy said:

“It is still not required for safe operation of the vehicle. Connectivity is primarily meant for navigation, customer service and, in general, fleet management.”

Many initially assumed the option of constant connectivity would be enabled on the Cybercab for passenger entertainment or work. With the Cybercab, passengers won’t be doing anything but enjoying the ride, so it seemed more than logical that they would be hanging out with Starlink internet access as an amenity.

However, Tesla’s primary concern with Robotaxi is safety, and nailing these first unsupervised rides is a crucial step to setting a good narrative on how effective driverless transportation can be.

Being able to get in touch with passengers or a vehicle if something is wrong is a crucial part of the overall experience, and preventative measures are being taken by Tesla to ensure a smooth process, even in the worst-case.

Continue Reading