News
Tesla Giga Shanghai’s Model 3 production run-rate already hitting 91% of ambitious 2021 targets
Tesla Giga Shanghai produced 22,292 Model 3 vehicles in the month of October, according to vehicle production data from the Chinese Passenger Car Association (CPCA). Tesla’s production numbers came in second in the country after SAIC-GM-Wuling (SGMW), which manufactured 29,843 units of its Mini EV micro electric car. BYD’s production numbers came in third with 22,268 units.
Tesla industry watcher @TroyTeslike noted that Gigafactory Shanghai produced 22,929 Model 3s in October. He calculated that the electric car maker achieved an annual run-rate of 275,148 vehicles per year at its current production pace. However, Tesla’s lightning-fast Shanghai factory is not known for maintaining the status quo. Not long ago Wall Street estimated that Tesla’s Shanghai plant would only produce 35,000 to 40,000 in its first year of operations.
Considering that Model 3 production is already at a run-rate of 275,000 vehicles per year in Giga Shanghai, it would appear that Tesla China is already at ~91% of its ambitious 2021 manufacturing target. Tesla China aims to manufacture 550,000 vehicles next year, 300,000 of which will be Model 3s. To reach its 2021 Model 3 production goals, Giga Shanghai would need to produce around 25,000 units of the all-electric sedan per month. That’s just a bit over 2,000 compared to Tesla’s October 2020 production figures.
Based on October’s numbers, Tesla China could reach its target 2021 Model 3 run rate by the end of the year, provided that it continues to steadily increase its production capabilities in the coming weeks. This may happen since the company is currently looking to deliver over 180,000 vehicles in the fourth quarter.
Once Giga Shanghai has reached its Model 3 production goals for next year, it can concentrate on its targets for the Model Y. Tesla China wants to hit the ground running by making 250,000 Model Y units in 2021. The Made-in-China Model Y was registered with the Chinese Ministry of Industry & Information Technology recently. Giga Shanghai just needs to wait for a permit to produce Tesla’s crossover. Sightings of the Made-in-China Tesla Model Y have been reported in China in recent weeks as well.
Just recently, the Chinese Passenger Car Association (CPCA) revealed that Tesla sold 12,143 Made-in-China Model 3s in October, translating to a 7.18% month-over-month growth compared to the previous month. In September, the EV automaker had sold 11,238 Model 3s in China. This may seem like a conservative improvement, but it should be noted that Tesla also exported 7,000 Model 3s to Europe in October.
The CPCA expects Giga Shanghai’s Model 3 sales to significantly increase in November and December, as mentioned by Tesla owner-investor @Ray4Tesla. Shanghai’s new regulations, which limits out-of-city vehicles within its major roads, could increase demand for the locally-made sedan. Giga Shanghai is also poised to export more Model 3s to Europe in the coming weeks, which could result in higher sales numbers from Tesla China in Q4.
News
Tesla Cybercab spotted with interesting charging solution, stimulating discussion
The port is located in the rear of the vehicle and features a manual door and latch for plug-in, and the video shows an employee connecting to a Tesla Supercharger.
Tesla Cybercab units are being tested publicly on roads throughout various areas of the United States, and a recent sighting of the vehicle’s charging port has certainly stimulated some discussions throughout the community.
The Cybercab is geared toward being a fully-autonomous vehicle, void of a steering wheel or pedals, only operating with the use of the Full Self-Driving suite. Everything from the driving itself to the charging to the cleaning is intended to be operated autonomously.
But a recent sighting of the vehicle has incited some speculation as to whether the vehicle might have some manual features, which would make sense, but let’s take a look:
🚨 Tesla Cybercab charging port is in the rear of the vehicle!
Here’s a great look at plugging it in!!
— TESLARATI (@Teslarati) January 29, 2026
The port is located in the rear of the vehicle and features a manual door and latch for plug-in, and the video shows an employee connecting to a Tesla Supercharger.
Now, it is important to remember these are prototype vehicles, and not the final product. Additionally, Tesla has said it plans to introduce wireless induction charging in the future, but it is not currently available, so these units need to have some ability to charge.
However, there are some arguments for a charging system like this, especially as the operation of the Cybercab begins after production starts, which is scheduled for April.
Wireless for Operation, Wired for Downtime
It seems ideal to use induction charging when the Cybercab is in operation. As it is for most Tesla owners taking roadtrips, Supercharging stops are only a few minutes long for the most part.
The Cybercab would benefit from more frequent Supercharging stops in between rides while it is operating a ride-sharing program.
Tesla wireless charging patent revealed ahead of Robotaxi unveiling event
However, when the vehicle rolls back to its hub for cleaning and maintenance, standard charging, where it is plugged into a charger of some kind, seems more ideal.
In the 45-minutes that the car is being cleaned and is having maintenance, it could be fully charged and ready for another full shift of rides, grabbing a few miles of range with induction charging when it’s out and about.
Induction Charging Challenges
Induction charging is still something that presents many challenges for companies that use it for anything, including things as trivial as charging cell phones.
While it is convenient, a lot of the charge is lost during heat transfer, which is something that is common with wireless charging solutions. Even in Teslas, the wireless charging mat present in its vehicles has been a common complaint among owners, so much so that the company recently included a feature to turn them off.
Production Timing and Potential Challenges
With Tesla planning to begin Cybercab production in April, the real challenge with the induction charging is whether the company can develop an effective wireless apparatus in that short time frame.
It has been in development for several years, but solving the issue with heat and energy loss is something that is not an easy task.
In the short-term, Tesla could utilize this port for normal Supercharging operation on the Cybercab. Eventually, it could be phased out as induction charging proves to be a more effective and convenient option.
News
Tesla confirms that it finally solved its 4680 battery’s dry cathode process
The suggests the company has finally resolved one of the most challenging aspects of its next-generation battery cells.
Tesla has confirmed that it is now producing both the anode and cathode of its 4680 battery cells using a dry-electrode process, marking a key breakthrough in a technology the company has been working to industrialize for years.
The update, disclosed in Tesla’s Q4 and FY 2025 update letter, suggests the company has finally resolved one of the most challenging aspects of its next-generation battery cells.
Dry cathode 4680 cells
In its Q4 and FY 2025 update letter, Tesla stated that it is now producing 4680 cells whose anode and cathode were produced during the dry electrode process. The confirmation addresses long-standing questions around whether Tesla could bring its dry cathode process into sustained production.
The disclosure was highlighted on X by Bonne Eggleston, Tesla’s Vice President of 4680 batteries, who wrote that “both electrodes use our dry process.”
Tesla first introduced the dry-electrode concept during its Battery Day presentation in 2020, pitching it as a way to simplify production, reduce factory footprint, lower costs, and improve energy density. While Tesla has been producing 4680 cells for some time, the company had previously relied on more conventional approaches for parts of the process, leading to questions about whether a full dry-electrode process could even be achieved.
4680 packs for Model Y
Tesla also revealed in its Q4 and FY 2025 Update Letter that it has begun producing battery packs for certain Model Y vehicles using its in-house 4680 cells. As per Tesla:
“We have begun to produce battery packs for certain Model Ys with our 4680 cells, unlocking an additional vector of supply to help navigate increasingly complex supply chain challenges caused by trade barriers and tariff risks.”
The timing is notable. With Tesla preparing to wind down Model S and Model X production, the Model Y and Model 3 are expected to account for an even larger share of the company’s vehicle output. Ensuring that the Model Y can be equipped with domestically produced 4680 battery packs gives Tesla greater flexibility to maintain production volumes in the United States, even as global battery supply chains face increasing complexity.
Elon Musk
Tesla Giga Texas to feature massive Optimus V4 production line
This suggests that while the first Optimus line will be set up in the Fremont Factory, the real ramp of Optimus’ production will happen in Giga Texas.
Tesla will build Optimus 4 in Giga Texas, and its production line will be massive. This was, at least, as per recent comments by CEO Elon Musk on social media platform X.
Optimus 4 production
In response to a post on X which expressed surprise that Optimus will be produced in California, Musk stated that “Optimus 4 will be built in Texas at much higher volume.” This suggests that while the first Optimus line will be set up in the Fremont Factory, and while the line itself will be capable of producing 1 million humanoid robots per year, the real ramp of Optimus’ production will happen in Giga Texas.
This was not the first time that Elon Musk shared his plans for Optimus’ production at Gigafactory Texas. During the 2025 Annual Shareholder Meeting, he stated that Giga Texas’ Optimus line will produce 10 million units of the humanoid robot per year. He did not, however, state at the time that Giga Texas would produce Optimus V4.
“So we’re going to launch on the fastest production ramp of any product of any large complex manufactured product ever, starting with building a one-million-unit production line in Fremont. And that’s Line one. And then a ten million unit per year production line here,” Musk stated.
How big Optimus could become
During Tesla’s Q4 and FY 2025 earnings call, Musk offered additional context on the potential of Optimus. While he stated that the ramp of Optimus’ production will be deliberate at first, the humanoid robot itself will have the potential to change the world.
“Optimus really will be a general-purpose robot that can learn by observing human behavior. You can demonstrate a task or verbally describe a task or show it a task. Even show it a video, it will be able to do that task. It’s going to be a very capable robot. I think long-term Optimus will have a very significant impact on the US GDP.
“It will actually move the needle on US GDP significantly. In conclusion, there are still many who doubt our ambitions for creating amazing abundance. We are confident it can be done, and we are making the right moves technologically to ensure that it does. Tesla, Inc. has never been a company to shy away from solving the hardest problems,” Musk stated.
Tesla Cybercab spotted with interesting charging solution, stimulating discussion
Tesla confirms that it finally solved its 4680 battery’s dry cathode process
