Connect with us

News

SpaceX Crew Dragon, four astronauts set for brief flight around the space station

Four astronauts are about to take Crew Dragon for a brief joyride around the ISS in order to switch docking ports. (NASA)

Published

5 years ago

on

To set the stage for another Dragon launch just a few weeks from now, NASA astronauts are preparing to board a SpaceX Crew Dragon for a brief flight around the International Space Station (ISS).

Orbiting roughly 400 km (250 mi) above the Earth’s surface, the ISS and its crew of seven international astronauts have just two docking ports available to manage a growing influx of SpaceX Crew and Cargo Dragon 2 spacecraft, as well as Boeing’s chronically delayed Starliner. While Starliner hasn’t flown since a near-catastrophic orbital debut in December 2019 and isn’t likely to reattempt that uncrewed flight test until the second half of 2021, SpaceX is in the exact opposite position as it prepares to sustain an unprecedented Dragon launch cadence.

One challenge of that cadence ramp – space station port logistics and availability – is now becoming clear as SpaceX nears its next Crew Dragon NASA astronaut launch.

Crew Dragon capsule C207 and its expendable trunk have been in orbit for almost five months (140 days), crushing the previous non-Dragon US record of 84 days. (NASA)

All launched on SpaceX Cargo Dragons, including a third destroyed during Falcon 9’s CRS-7 launch failure, the International Space Station has just two perpendicular International Docking Adapter (IDA) ports – one facing space and the other facing Earth. Regardless of CRS-7’s lost port, that IDA duo was always NASA’s plan.

The ISS requires the use of a huge, robotic arm (Canadarm2) to unload unpressurized cargo from spacecraft and that arm doesn’t have the mobility to access vehicles docked to the Earth-facing IDA port, meaning that cargo spacecraft with IDA ports can really only dock on the space-facing port. Cargo Dragon 2’s use of IDA docking and the Cygnus spacecraft’s use of berthing thankfully mean that neither NASA Commercial Resupply Services 2 (CRS2) vehicle is at risk of a traffic jam.

Advertisement
Starliner is unlikely to launch on its second Orbital Flight Test attempt before July 2021. Crew Dragon completed a similar (successful) orbital debut in March 2019. (Boeing)
Delayed from a planned 2021 launch debut, Dream Chaser is now scheduled to launch on ULA’s next-gen Vulcan rocket no earlier than (NET) early 2022. (SNC)

Sierra Nevada Corporation (SNC) is set to debut the cargo variant of its Dream Chaser spaceplane as early as 2022 for annual launches and will need to share that same lone IDA port with Cargo Dragon for its (approximately) annual resupply missions. More importantly, though, Crew Dragon and Boeing’s Starliner both require the use of one of those two IDA ports to deliver astronauts to and from the ISS. Both spacecraft are also expected to leave with the same crew that launched on them, meaning that both will spend a fully six or so months in orbit on each crew rotation mission.

In general, NASA also plans to overlap all Commercial Crew Program (CCP) astronaut launches, meaning that Crew Dragon will wait for Starliner to arrive (and vice versa) before departing the ISS with its four-astronaut crew. Those use-cases and safety requirements combine to create strict, complex scheduling challenges that mean a Cargo Dragon or Dream Chaser can never be docked to the ISS during a crew handover, while also adding significant constraints to any planned private astronaut (tourist) missions to the station – of which SpaceX already has at least one.

As Cargo Dragon 2 approached the ISS, SpaceX’s Crew-1 Crew Dragon (bottom center) was easily visible for almost the entire docking. That successful arrival marked the first time two Dragons were simultaneously in orbit and docked to the ISS – a feat SpaceX is on track to repeat (albeit with two Crew Dragons) just four months later. (SpaceX)
Two Dragons, one station. (NASA)

In the meantime, though Boeing’s Starliner is now at least 18 months behind SpaceX’s Crew Dragon on the path to launching NASA astronauts to and from the ISS, SpaceX is picking up the slack to the extent that station ‘traffic’ conditions are practically unaffected. Whereas NASA’s nominal plan was to alternate between its two redundant Commercial Crew providers before Boeing ran into huge delays, SpaceX is on track to launch Crew Dragon’s Crew-2 astronaut ferry mission as early as April 22nd.

The flight-proven Demo-2 Dragon will then rendezvous with the ISS while Crew-1’s Dragon and four astronauts are still aboard the station. Crew-1 and Crew-2 will spend about a week together before the former group boards their Dragon and heads for home. As few as six or so weeks later, SpaceX could launch its second Cargo Dragon 2 resupply mission, known as CRS-22. – This morning’s “port relocation,” which will see the Crew-1 Dragon will ‘relocate’ from the station’s Earth-facing IDA to its space-facing port, is thus necessary to free up that port for Cargo Dragon’s arrival when Crew-1 departs.

Barring major delays, SpaceX is currently on track to complete another two Crew and Cargo Dragon launches in 2-3 months, marking four Dragon missions in seven months if all goes to plan. Another three Dragon missions are firmly scheduled in 2021, potentially making for seven Dragon launches in 11-12 months if schedules hold. SpaceX’s current record – technically achieved twice in 2018 and 2019 – is five orbital Dragon missions in 12 months.

Tune in below around 6am EDT (UTC-4) to catch Crew Dragon C207’s brief 46-minute jaunt around the International Space Station (ISS) – a first for an American crewed spacecraft of any kind.

Advertisement
Related Topics:

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Tesla Cybercab gets crazy change as mass production begins

Tesla has officially kicked off mass production of its groundbreaking Cybercab robotaxi at Giga Texas, and the first units rolling off the line feature a striking transformation that’s turning heads across the EV community.

Published

3 hours ago

on

April 25, 2026

By

Credit: TechOperator | X

Tesla Cybercab has evidently received a pretty crazy change from an aesthetic standpoint, as the company has made the decision to offer an additional finish on the vehicle as mass production is starting.

Tesla has officially kicked off mass production of its groundbreaking Cybercab robotaxi at Giga Texas, and the first units rolling off the line feature a striking transformation that’s turning heads across the EV community.

VIN Zero—the very first production Cybercab—showcases a vibrant champagne gold exterior with a high-gloss finish, a dramatic departure from the flat, matte-wrapped prototypes that debuted at the 2024 “We, Robot” event.

This glossy sheen is a pretty big pivot from what was initially shown by Tesla. The company has maintained a pretty flat tone in terms of anything related to custom colors or finishes.

A specialized clear coat or process delivers the deep, reflective gloss without conventional painting. The result is a premium, mirror-like shine, and it looks pretty good, and gives the compact two-seater a more luxurious and futuristic presence than the subdued matte prototypes.

Photos shared by Tesla community members reveal VIN Zero in a showroom-like setting at Giga Texas, highlighting refined panel gaps, large aero wheel covers, and the signature no-steering-wheel, no-pedals interior optimized for full autonomy.

The open frunk in some images offers a glimpse of practical storage, while the overall build quality appears more polished than that of test mules.

This glossy evolution aligns with Tesla’s broader production ramp. After the first unit in February 2026, the company has shifted to volume manufacturing, with dozens of units already spotted in outbound lots. CEO Elon Musk and the team aim for hundreds per week, paving the way for unsupervised FSD robotaxi networks that could slash ride costs to pennies per mile.

The Cybercab holds Tesla’s grand ambitions of operating a full-service ride-hailing service without any drivers in its grasp. Tesla has yet to solve autonomy, but is well on its way, and although its timelines are usually a bit off, improvements often come through the Over-the-Air updates to the Full Self-Driving suite.

Continue Reading

News

Tesla confirms Cybercab with no steering wheel enters production

Published

6 hours ago

on

April 25, 2026

By

Tesla has confirmed today that its steering wheel-less and pedal-less Cybercab, the vehicle geared toward launching the company’s autonomous ride-hailing hopes, has officially entered production at its Giga Texas production facility outside of Austin.

The Cybercab is a sleek two-door, two-passenger coupe engineered from the ground up as an electric self-driving vehicle. It features no steering wheel or pedals, relying instead on Tesla’s advanced vision-only Full Self-Driving system powered by multiple cameras and artificial intelligence.

The minimalist cabin centers on a large display screen that serves as the primary interface for passengers, creating an open, futuristic space optimized for comfort during unsupervised rides. A compact 35-kilowatt-hour battery pack delivers exceptional efficiency at 5.5 miles per kilowatt-hour, providing an estimated 200-mile range.

Additional innovations include inductive charging compatibility and a lightweight design that enhances aerodynamics and performance.

Production at Giga Texas builds on earlier prototypes and initial units completed earlier in 2026. The facility, already a hub for Model Y and Cybertruck assembly, now ramps up dedicated lines for the Cybercab.

This shift to volume manufacturing reflects Tesla’s strategy to scale affordable autonomous vehicles rapidly.

By focusing on a dedicated platform rather than adapting existing models, the company aims to keep costs low while prioritizing safety and reliability through continuous AI improvements.

The Cybercab’s debut in production carries broad implications for urban mobility. As the cornerstone of Tesla’s Robotaxi network, it promises on-demand, driverless rides that could slash transportation expenses, reduce traffic accidents caused by human error, and lower emissions through its all-electric powertrain.

Accessibility features, such as space for service animals or assistive devices, further broaden its appeal. Regulators and cities worldwide will soon evaluate its deployment, but the vehicle’s design already addresses key hurdles in scaling unsupervised autonomy.

Challenges persist, including full regulatory clearance and building charging infrastructure. Yet this production launch signals momentum. With Cybercabs poised to roll out in increasing numbers, Tesla edges closer to a future where personal ownership meets shared fleets of intelligent vehicles.

The start of Cybercab production is more than just a new vehicle entering mass manufacturing for Tesla, as it’s a signal autonomy is near. Being developed without manual controls is such a massive sign by Tesla that it trusts its progress on Full Self-Driving.

While the development of that suite continues, Tesla is making a clear cut statement that it is prepared to get its fully autonomous vehicle out in public roads as it prepares to revolutionize passenger travel once and for all.

Continue Reading

News

Tesla Summon got insanely good in FSD v14.3.2 — Navigation? Not so much

There were two new lines of improvements in the release notes: one addressing Actually Smart Summon (ASS), and another that now allows drivers to choose a reason for an intervention via a small menu during disengagement.

Published

1 day ago

on

April 24, 2026

By

(Photo: Hector Perez/YouTube)

Tesla Full Self-Driving v14.3.2 began rolling out to some owners earlier this week, and there are some notable improvements that came with this update.

There were two new lines of improvements in the release notes: one addressing Actually Smart Summon (ASS), and another that now allows drivers to choose a reason for an intervention via a small menu during disengagement.

Overall operation saw a handful of slight improvements, especially with parking performance, which has been the most notable difference with the arrival of FSD v14.3. However, there are still some very notable shortcomings, most notably with region-specific signage and navigation.

Tesla Assisted Smart Summon (ASS) improvements

There are noticeable improvements to ASS operation, which has definitely been inconsistent in terms of performance. Tesla wrote in the release notes for v14.3.2:

“Unified the model between Actually Smart Summon, FSD, and Robotaxi for more capable and reliable behavior.”
As recently as this month, I used Summon with no success. It had pulled around the parking lot I was in incorrectly, leaving the range at which Summon can be operated and losing a signal while moving in the middle of the lot.

This caused me to sprint across the lot to retrieve the vehicle:

Unfortunately, Summon was not dependable or accurate enough to use regularly. It appears Tesla might have bridged the gap needed to make it an effective feature, as two tests in parking lots proved that Summon was more responsive and faster to navigate to the location chosen.

It also did so without hesitation, confidently, and at a comfortable speed. I was able to test it twice at different distances:

I plan to test this more thoroughly and regularly through the next few weeks, and I avoided using it in a congested parking lot initially because I have not had overwhelming success with Summon in the past. I wanted to set a low baseline for it to see if it could simply pull up to the place I pinned in the Tesla app.

It was two for two, which is a big improvement because I don’t think I ever had successful Summon attempts back-to-back. It just seems more confident than ever before.

New Disengagement Categories

This is a really good idea from Tesla, but there are some issues with it. The categories you can select are Critical, Comfort, Preference, and Other.

I think the reasons why people choose to take over would be a better way to prompt drivers, like, “Traveling Too Fast,” “Incorrect Maneuver,” “Navigation Error,” would be more beneficial.

I say this because it seems that how we each categorize things might be different. For example, I shared a video of an intervention because the car had navigated to an exit to a parking lot and put its left blinker on, despite left turns not being allowed there.

I disengaged and chose Critical as the reason; it’s not a comfort issue, it’s not a preference, it’s quite literally an illegal turn, and it’s also dangerous because it cuts across several lanes of traffic and is 180 degrees.

Some said I should not have labeled this as Critical, but that’s the description I best characterized the disengagement as.

Categorizing interventions is a good thing, but it’s kind of hard to determine how to label them correctly.

Inconsistency with Regional Traffic Patterns

Tesla Full Self-Driving is pretty inconsistent with how it handles regional or local traffic patterns and road rules. The most frequent example I like to use is that of the “Except Right Turn” stop sign, which has become a notorious sighting on our social media platforms.

In the initial rollout of v14.3, my Model Y successfully navigated through one of these stop signs with no issues. However, testing at two of these stop signs yesterday proved it is still not sure how to read signs and navigate through them properly.

Off camera, I approached another one of these signs and felt the car coming to a stop, so I nudged it forward with the accelerator pedal pressed.

This helped the car go through the sign without stopping, but I could feel the bucking of the vehicle as the car really wanted to stop.

Musk said on the earnings call earlier this week that unsupervised FSD would probably be available in some regions before others, including a state-to-state basis in the U.S.

“It’s difficult to release this like to everyone everywhere all at once because we do want to make sure that they’re not unique situations in a city that particularly complex intersection or — actually, they tend to be places where people get into accidents a lot because they’re just — perhaps there’s — and like I said, an unsafe intersection or bad road markings or a lot of weather challenges. So I think we would release unsupervised gradually to the customer fleet as we feel like a particular geography is confirmed to be safe.”
This could be one of those examples that Tesla just has to figure out.

Highway Operation

Full Self-Driving is already pretty good at routine roadway navigation, so I don’t have too much to report here.

However, I was happy with FSD’s decision-making at several points, including its choice not to pass a slightly slower car and remain in the right lane as we approached the off-ramp:

Better Maneuvering at Stop Signs

Many FSD users report some strange operations at stop signs, especially four-way intersections where there is a stop sign and a line on the road, and they’re not even with one another.

I experienced this quite frequently and found that FSD would actually double stop: once at the stop sign and again at the line.

This created some interesting scenarios for me and I had many cars honk at me when the second stop would happen. Other vehicles that had waved me on to proceed through the intersection would become frustrated at the second stop.

FSD seems to have worked through this particular maneuver:

FSD should know to go to the more appropriate location (whichever provides better visibility), and proceed when it is the car’s turn to move. The double stop really ruined the flow of traffic at times and generally caused some frustration from other drivers.

Continue Reading