News
SpaceX teases more Starship flight tests “in the days ahead”
A SpaceX engineer hosting the company’s recent record-breaking Starlink launch told viewers to “stay tuned for additional [Starship] test flights in the days ahead.”
Spoken during a segue focused on Starship’s first fully successful landing days prior, the senior SpaceX employee’s choice of words could scarcely have been more intriguing and wide-open to interpretation. Ever since Starship SN15 stuck the landing on May 5th, the ~50-meter (~165 ft) tall steel rocket has taken a small but noteworthy departure from partial prototypes SN5 and SN6 – both of which survived short hop tests last year.
Unlike Starship SN5 and SN6, which both took two full days to safe, SpaceX recovery teams were able to approach full-size prototype SN15 less than four hours after touchdown and an adjacent highway was opened to the public just half a day after that. More importantly, as of May 11th, Starship SN15 has effectively been ready for transport for five days.
Unlike any prior Starship test, Starship SN15 was the first vehicle to test out a new custom-built transporter that also serves a purpose similar to the Octagrabber robots SpaceX uses to secure landed Falcon boosters at sea. It’s unclear how exactly the jig works but it appears to separate into two pieces – both attached to a pair of self-propelled modular transporters (SPMTs) – that can then encircle a landed Starship and be bolted together.
In that sense, just like Octagrabber allows SpaceX to secure Falcon boosters without a crane, SpaceX’s new Boca Chica recovery jig allows it to secure landed Starships without having to attach a crane and lift a rocket with unknown structural integrity. Technically, once that recovery jig is in place around Starship and the rocket is firmly secured to it, there’s nothing preventing SpaceX from immediately transporting it elsewhere. SN5 and SN6 went back to SpaceX’s Starship factory almost immediately after they were craned onto transporters.
That process also required landing leg removal, which involved a crane lifting SN5 and SN6 and workers carefully balancing the rocket on jack stands to gain access. With SN15, that new jig meant that SpaceX could lift the Starship with the transporters’ own hydraulic leveling systems, removing the need for a crane. Thanks to that improvement, the rocket’s legs were removed less than two days after landing.
However, beyond moving Starship SN15 from the edge of the landing zone to its center, SpaceX has yet to actually transport it anywhere more than four days after it was ready to roll. According to CEO Elon Musk, SpaceX “might try to refly SN15 soon” and the fact that the company still hasn’t transported Starship SN15 back to the build site seems to imply that Musk really meant “soon”.
In other words, there isn’t an obvious reason for SpaceX to keep Starship SN15 at the launch site unless the company believes that transporting it elsewhere would be counterproductive. Given that SpaceX has yet to install replacement landing legs on the rocket, it’s hard to guess the company’s plans for SN15, but it is clear that SpaceX itself is undecided. According to an excellent NASASpaceflight.com overview of where things currently stand, SpaceX is evaluating its next steps and options include reflying Starship SN15, rolling out Starship SN16 and flying that prototype “to a higher altitude,” or even jumping straight to “orbital testing” with a future Starship and a Super Heavy booster.
SpaceX’s webcast host hinting at multiple additional Starship launches “in the days ahead” has not helped to calm that storm of speculation and possibilities. As of May 11th, SpaceX has nevertheless scheduled a a road closure for an apparent transport to or from the launch pad. What transpires could easily end all speculation if Starship SN15 or SN16 wind up on the move, but it’s just as likely that SpaceX is simply preparing to move the latest of seven or eight custom-built propellant storage tanks to its growing orbital launch site.
For now, we’ll just have to wait and see.
Tesla rolled out Full Self-Driving version 14.2 yesterday to members of the Early Access Program (EAP). Expectations were high, and Tesla surely delivered.
With the rollout of Tesla FSD v14.2, there were major benchmarks for improvement from the v14.1 suite, which spanned across seven improvements. Our final experience with v14.1 was with v14.1.7, and to be honest, things were good, but it felt like there were a handful of regressions from previous iterations.
While there were improvements in brake stabbing and hesitation, we did experience a few small interventions related to navigation and just overall performance. It was nothing major; there were no critical takeovers that required any major publicity, as they were more or less subjective things that I was not particularly comfortable with. Other drivers might have been more relaxed.
With v14.2 hitting our cars yesterday, there were a handful of things we truly noticed in terms of improvement, most notably the lack of brake stabbing and hesitation, a major complaint with v14.1.x.
However, in a 62-minute drive that was fully recorded, there were a lot of positives, and only one true complaint, which was something we haven’t had issues with in the past.
The Good
Lack of Brake Stabbing and Hesitation
Perhaps the most notable and publicized issue with v14.1.x was the presence of brake stabbing and hesitation. Arriving at intersections was particularly nerve-racking on the previous version simply because of this. At four-way stops, the car would not be assertive enough to take its turn, especially when other vehicles at the same intersection would inch forward or start to move.
This was a major problem.
However, there were no instances of this yesterday on our lengthy drive. It was much more assertive when arriving at these types of scenarios, but was also more patient when FSD knew it was not the car’s turn to proceed.
Can report on v14.2 today there were ZERO instances of break stabbing or hesitation at intersections today
It was a significant improvement from v14.1.x
— TESLARATI (@Teslarati) November 21, 2025
This improvement was the most noticeable throughout the drive, along with fixes in overall smoothness.
Speed Profiles Seem to Be More Reasonable
There were a handful of FSD v14 users who felt as if the loss of a Max Speed setting was a negative. However, these complaints will, in our opinion, begin to subside, especially as things have seemed to be refined quite nicely with v14.2.
Freeway driving is where this is especially noticeable. If it’s traveling too slow, just switch to a faster profile. If it’s too fast, switch to a slower profile. However, the speeds seem to be much more defined with each Speed Profile, which is something that I really find to be a huge advantage. Previously, you could tell the difference in speeds, but not in driving styles. At times, Standard felt a lot like Hurry. Now, you can clearly tell the difference between the two.
It seems as if Tesla made a goal that drivers should be able to tell which Speed Profile is active if it was not shown on the screen. With v14.1.x, this was not necessarily something that could be done. With v14.2, if someone tested me on which Speed Profile was being used, I’m fairly certain I could pick each one.
Better Overall Operation
I felt, at times, especially with v14.1.7, there were some jerky movements. Nothing that was super alarming, but there were times when things just felt a little more finicky than others.
v14.2 feels much smoother overall, with really great decision-making, lane changes that feel second nature, and a great speed of travel. It was a very comfortable ride.
The Bad
Parking
It feels as if there was a slight regression in parking quality, as both times v14.2 pulled into parking spots, I would have felt compelled to adjust manually if I were staying at my destinations. For the sake of testing, at my first destination, I arrived, allowed the car to park, and then left. At the tail-end of testing, I walked inside the store that FSD v14.2 drove me to, so I had to adjust the parking manually.
This was pretty disappointing. Apart from parking at Superchargers, which is always flawless, parking performance is something that needs some attention. The release notes for v14.2. state that parking spot selection and parking quality will improve with future versions.
Any issues with parking on your end? 14.1.7 didn’t have this trouble with parking pic.twitter.com/JPLRO2obUj
— TESLARATI (@Teslarati) November 21, 2025
However, this was truly my only complaint about v14.2.
You can check out our full 62-minute ride-along below:
Elon Musk
SpaceX issues statement on Starship V3 Booster 18 anomaly
The incident unfolded during gas-system pressure testing at the company’s Massey facility in Starbase, Texas.
SpaceX has issued an initial statement about Starship Booster 18’s anomaly early Friday. The incident unfolded during gas-system pressure testing at the company’s Massey facility in Starbase, Texas.
SpaceX’s initial comment
As per SpaceX in a post on its official account on social media platform X, Booster 18 was undergoing gas system pressure tests when the anomaly happened. Despite the nature of the incident, the company emphasized that no propellant was loaded, no engines were installed, and personnel were kept at a safe distance from the booster, resulting in zero injuries.
“Booster 18 suffered an anomaly during gas system pressure testing that we were conducting in advance of structural proof testing. No propellant was on the vehicle, and engines were not yet installed. The teams need time to investigate before we are confident of the cause. No one was injured as we maintain a safe distance for personnel during this type of testing. The site remains clear and we are working plans to safely reenter the site,” SpaceX wrote in its post on X.
Incident and aftermath
Livestream footage from LabPadre showed Booster 18’s lower half crumpling around the liquid oxygen tank area at approximately 4:04 a.m. CT. Subsequent images posted by on-site observers revealed extensive deformation across the booster’s lower structure. Needless to say, spaceflight observers have noted that Booster 18 would likely be a complete loss due to its anomaly.
Booster 18 had rolled out only a day earlier and was one of the first vehicles in the Starship V3 program. The V3 series incorporates structural reinforcements and reliability upgrades intended to prepare Starship for rapid-reuse testing and eventual tower-catch operations. Elon Musk has been optimistic about Starship V3, previously noting on X that the spacecraft might be able to complete initial missions to Mars.
Investor's Corner
Tesla analyst maintains $500 PT, says FSD drives better than humans now
The team also met with Tesla leaders for more than an hour to discuss autonomy, chip development, and upcoming deployment plans.
Tesla (NASDAQ:TSLA) received fresh support from Piper Sandler this week after analysts toured the Fremont Factory and tested the company’s latest Full Self-Driving software. The firm reaffirmed its $500 price target, stating that FSD V14 delivered a notably smooth robotaxi demonstration and may already perform at levels comparable to, if not better than, average human drivers.
The team also met with Tesla leaders for more than an hour to discuss autonomy, chip development, and upcoming deployment plans.
Analysts highlight autonomy progress
During more than 75 minutes of focused discussions, analysts reportedly focused on FSD v14’s updates. Piper Sandler’s team pointed to meaningful strides in perception, object handling, and overall ride smoothness during the robotaxi demo.
The visit also included discussions on updates to Tesla’s in-house chip initiatives, its Optimus program, and the growth of the company’s battery storage business. Analysts noted that Tesla continues refining cost structures and capital expenditure expectations, which are key elements in future margin recovery, as noted in a Yahoo Finance report.
Analyst Alexander Potter noted that “we think FSD is a truly impressive product that is (probably) already better at driving than the average American.” This conclusion was strengthened by what he described as a “flawless robotaxi ride to the hotel.”
Street targets diverge on TSLA
While Piper Sandler stands by its $500 target, it is not the highest estimate on the Street. Wedbush, for one, has a $600 per share price target for TSLA stock.
Other institutions have also weighed in on TSLA stock as of late. HSBC reiterated a Reduce rating with a $131 target, citing a gap between earnings fundamentals and the company’s market value. By contrast, TD Cowen maintained a Buy rating and a $509 target, pointing to strong autonomous driving demonstrations in Austin and the pace of software-driven improvements.
Stifel analysts also lifted their price target for Tesla to $508 per share over the company’s ongoing robotaxi and FSD programs.
Tesla Full Self-Driving v14.2 – Full Review, the Good and the Bad
SpaceX issues statement on Starship V3 Booster 18 anomaly
