Connect with us

News

SpaceX assembles world’s largest rocket with giant robot arms

Published

on

For the second time ever, SpaceX has fully stacked a two-stage Starship rocket, once again creating the largest launch vehicle prototype ever assembled.

This time around, though, SpaceX used building-sized arms installed on Starbase’s ~145-meter-tall (~480 ft) ‘launch tower’ to lift to grapple Starship, lift massive upper stage more than 80 meters (260 ft) off the ground, and lower on top of a Super Heavy booster. After multiple days of apparent troubleshooting and false-starts and weeks of proof-testing with water bags weighing dozens to hundreds of tons, the giant robot seemed to perform perfectly, pausing only once during the ascent.

After holding Starship S20’s weight for about an hour and attaching two smaller stabilization arms to the side of the rocket, the Mechazilla arms began to lift Starship in earnest around 10:27 pm CST. Around 10:45 pm, with the tip of Starship S20’s nose just shy of the top of the launch tower, the lift reached its apogee – multiple SpaceX drones swarming the rocket to document the milestone.

At their peak, the tower’s arms then swung Starship about 45 degrees until it was directly above Super Heavy Booster 4’s interstage. The launch tower’s Starship quick-disconnect (QD) arm – responsible for connecting the upper stage to ground systems – then swung in, partially deploying and ‘grabbing’ Super Heavy to fully stabilize the booster. Finally, once the booster was secured and SpaceX was confident in the alignment of the two massive rocket stages, the tower arms carefully lowered Starship onto Super Heavy’s interstage, where several clamps grabbed onto the ship to fully mate the pair.

Advertisement

While the actual near-term utility of those arms remains ambiguous at best, their first successful use is an undeniably impressive technical achievement. SpaceX began assembling them less than nine months ago, beginning with the Starship QD arm around May 2021. SpaceX began installing the two main Mechazilla arms in October 2021, three months after assembly began. Just three months after that, all three have come together for the first time to lift and stack the world’s largest rocket.

A very long-distance view of the milestone from Teslarati photographer Richard Angle, who is in Texas for Elon Musk’s update.

Perhaps most impressive of all is that on the very first try, lifting Starship and stacking it on top of Super Heavy with the launch and integration tower took just three hours from the start of the lift to a fully mated rocket. Additionally, though SpaceX did get lucky with minimal wind, it’s also impressive just how little uncontrolled movement was visible as Starship hung in the air hundreds of feet above the ground. Virtually no swaying was visible, meaning that the arms were doing their job of stabilizing the massive rockets in a situation where even a gentle breeze could make stacking Starship with a crane far too risky.

CEO Elon Musk will now have one of the most impressive accomplishments in modern spaceflight as a backdrop when he presents an update on the same rocket, hopefully shedding light on Starship’s next steps and the roles Ship 20 and Booster 4 might play in them. Stay tuned for updates on the event, which is scheduled to begin no earlier than 8pm CST, February 10th (02:00 UTC 11 Feb).

Advertisement

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Tesla upgrades Model Y’s affordable trims with new interior features

Published

on

Credit: Tesla

Tesla has upgraded the Model Y’s two most affordable trims, the Rear-Wheel-Drive and All-Wheel-Drive, with two new interior features that bring them level with their “Premium” siblings.

The Rear-Wheel-Drive (RWD) and All-Wheel-Drive (AWD) trims, formerly known as the “Standard” offerings of Tesla’s most popular vehicle, are now fitted with the all-black headliner and a higher-quality 16-inch center screen, two features that were added to the Premium trims earlier this year.

The RWD and AWD trims of the Model Y now have a more premium interior feel with these upgrades, and it also appears to be a move by Tesla to streamline manufacturing by eliminating variance across configuration levels.

It makes production less complicated when the interior colors are all identical. Additionally, all Model Y builds now have the larger and higher-resolution screen than previous model years.

Priced at $39,990 and $41,990, respectively, the Model Y RWD and AWD are quite different from the Premium trims. Tesla aimed to make an affordable version of what has been the best-selling car in the world on several occasions, enabling more accessibility.

The differences from an interior standpoint are noticeable, as there is significantly less storage, a lack of A/C seats, and no glass roof. However, the car is still a great option and features a good powertrain, strong range ratings of 321 miles for the RWD and 294 miles for the AWD, and a great ride quality.

Tesla Model Y Standard Full Review: Is it worth the lower price?

Other shortcomings are the lack of acoustic-lined windows, which are featured in the Premium trims to help with excess cabin noise. In our testing of the Model Y Standard back in late 2025, this was perhaps the most noticeable difference between it and the Premium trim. The stereo was also a huge difference:

The RWD and AWD trims of the Model Y are still a great vehicle at an affordable price, and you can experience them for yourself at your local Tesla showroom. Test drives are always available, and it’s a great way to experience an EV for yourself, especially if you have no knowledge about them.

Continue Reading

Investor's Corner

Tesla has its answer to auto growth, it just has to bring it to the U.S.: analyst

Published

on

Credit: Tesla China

Tesla has its answer to grow its automotive sales over the next few years, TD Cowen analyst Itay Michaeli says, but it just has to bring it to the U.S.

On Thursday, Michaeli reiterated his $490 price target and the ‘Buy’ rating he already held on Tesla stock (NASDAQ: TSLA). However, its automotive division has struggled to show sequential growth over the past few years, mostly due to its focus on AI and Full Self-Driving. Tesla already axed two of its lower-volume vehicles with the Model S and Model X earlier this year.

However, Tesla does not need to engineer an entire new vehicle to trigger an upward tick in sales; it just has to bring it from China to the U.S., Michaeli said.

He is talking about the Model Y L, a slightly larger version of the all-electric crossover that is already available in China. U.S. customers have been pleading with CEO Elon Musk to bring it to the country since its launch in Asia last year, but he’s not convinced of it because of the advent of self-driving and its importance in this particular market.

The problem is that Tesla owners have been requesting something larger that could fit a typical American family. The Model Y L is slightly larger than the standard Model Y, but some are concerned that it could still be too small to fit what most people might need.

Instead, they have asked for a full-size SUV from Tesla.

Tesla gives big hint that it will build Cyber SUV, smaller Cybertruck

Nevertheless, the Model Y L still presents a great opportunity for Tesla in the U.S., and Michaeli says that there is an additional sales opportunity of about 100,000 units, with demand potential falling somewhere between 60,000 and 135,000 units.

TD Cowen’s note to investors also analyzed that Tesla’s growth could come from a stock perspective as well, positively impacting the stock price, as it has been widely reliant on vehicle sales, even though Tesla has truly phased itself away from that being an important metric.

Tesla stands to gain greatly from the introduction of the Model Y L in the U.S., but only if Elon Musk sees it as a viable fit for the market. Families may need to see Tesla bring something larger to the U.S., or they might be forced to buy from another automaker that offers something that fits is needs for more interior space to haul around the kids.

Continue Reading

Elon Musk

Tesla Hardware 3 owners could be made whole this month

Published

on

tesla-asia-model-3
Credit: Tesla Asia/Twitter

Tesla Hardware 3 owners are set to get a new Full Self-Driving version this month as the company plans to release what it is referring to as v14 Lite.

The rollout is not yet confirmed for June, but Tesla executives have stated on several occasions that this more refined FSD iteration will work with their cars and increase its capabilities.

This comes after Tesla admitted during its last Earnings Call that these Hardware 3 vehicles would not be able to achieve Full Self-Driving, something that they did not know when they bought these cars. We regularly receive messages from Hardware 3 owners asking when v14 Lite will come out, what they should expect, and whether it is worth it to upgrade the self-driving computer or buy a new car altogether.

It is hard not to feel for them; Tesla CEO Elon Musk said at the company’s 2019 Autonomy Day that all vehicles produced at the time, including Hardware 3 cars, had “all the hardware necessary, compute and otherwise, for Full Self-Driving.”

Musk also said in March of that year that, “Anyone who purchased Full Self-Driving will get FSD computer upgrade for free.”

However, during the Q1 2026 Earnings Call, Musk admitted that Hardware 3 vehicles would not be capable of FSD, as “It has only 1/8th the memory bandwidth of Hardware 4, and memory bandwidth is one of the key elements needed for unsupervised FSD.”

Tesla has made some effort to remedy these Hardware 3 owners by offering:

  • Discounted trade-ins toward AI4 cars
  • Hardware retrofits, which would replace the self-driving computer and upgrade all cameras
  • Full Self-Driving v14 Lite

The issue is that many of these owners were led to believe their cars would be capable of unsupervised self-driving. Now, they’re left scrambling for options, and while there are several, they will all require more money out of their pockets.

Expectations for Tesla v14 Lite for Hardware 3 Owners

The big differences between the AI4 v14 and v14 Lite for Hardware 3 owners will stem primarily from hardware constraints. Tesla developed v14 Lite with an optimized frame of mind; the v14 neural nets are toned down to run on an HW3 computer.

Tesla v14 will use the same behavior, but its limits will be hardware-related, especially given that the cameras on HW3 vehicles are lower-resolution.

Tesla reveals its plans for Hardware 3 owners who are eager for updates

This will result in potentially more edge cases due to the lower quality perception and less long-range detection, but reaction time and overall confidence should be more refined.

There should also be a handful of additional features that are available on AI4 cars, such as:

  • Starting Full Self-Driving from Park
  • Auto Shift
  • Streaks
  • Speed Profiles
  • Improved Dynamics, like Pulling Over for Emergency Vehicles

Tesla plans to release v14 Lite this month, but we are all familiar with how the company can be with timelines. Additionally, if v14 Lite has not proven to be ready for a wide release, Tesla will slam the brakes on the rollout.

We would anticipate that Tesla is testing v14 Lite internally, and likely has been for several months.

Continue Reading