Connect with us
11 Starlink dishes spotted on a Norwegian Breakaway cruise 2 11 Starlink dishes spotted on a Norwegian Breakaway cruise 2

News

11 Starlink dishes spotted on a Norwegian Breakaway cruise

Published

on

Eleven Starlink terminals were spotted on a Norwegian Breakaway cruise which is owned and operated by Norwegian Cruise Lines. One of our readers shared several photos with Teslarati. Our reader wished to remain anonymous but was able to get some great feedback and share it with us.

Credit: Anonymous

“On a Norwegian Breakaway cruise and spotted 11 Starlink dishes. 8 here on the top sundeck and 3 more behind me. It’s not active yet, that I can see, as speeds are slow. The IP address doesn’t show Starlink, and the latency is still 600+ ms,” he said in an email.

“But at least the dishes are installed, which means a launch is imminent. I’ll talk to someone tomorrow sometime and try to gather more information. When it does launch, it will mean faster speeds, lower latency, and an overall great internet experience compared to the current satellite system. I hope they lower the prices to something more reasonable, like $10-15 per day for premium,”

Teslarati reached out to Norwegian Cruise Lines in late October, and we’ll update you when we receive a reply. Our reader would like to know why the pricing of the internet was high. He noted that it was $30 per day for standard service, which didn’t include streaming or VPN. In addition to those, it was $40 per day, so he is hopeful that Starlink will enable the cruise line to lower the pricing to “something more normal.”

“I’d love to see $15 per day or less for premium internet with streaming.”

In the photos that he shared below, you can see the existing satellite antennas that the legacy service runs on. He pointed out that on top of the white structure, there are four antennas along with the eight on the railing for a total of 12 dishes.

“These are the new high-performance antennas with wedge mount,” he said.

Credit: Anonymous
Credit: Anonymous

In a follow-up email, our reader added that he was able to talk with someone who requested anonymity. According to the anonymous source,  the cruise ship was the first to test Starlink in the NCL fleet.

“It’s not running 100% of the time yet, but they turn it on for short times to test it. I was able to test when it was active, and you can see the much lower ping time and lower packet loss when on Starlink.”

 

Credit: Anonymous

“The lower speeds are because of a rate limit for the plan I’m on. The service can run faster, but the rate limit is set per device to avoid congestion,” he added.

Credit: AnonymousThe second source doesn’t know when Starlink will roll out to the whole fleet, but our reader assumed it will be after the completion of the test.In October, Norwegian cruise operator Hurtigruten installed Starlink and, working with Speedcast, began testing the services on its ships in March, which was four months before SpaceX announced Starlink Maritime. You can view the full gallery of photos sent by our reader below.&nbsp

Your feedback is essential. If you have any comments or concerns or see a typo, you can email me at johnna@teslarati.com. You can also reach me on Twitter at @JohnnaCrider1.

Teslarati is now on TikTok. Follow us for interactive news & more. Teslarati is now on TikTok. Follow us for interactive news & more. You can also follow Teslarati on LinkedInTwitter, Instagram, and Facebook.

Advertisement

Johnna Crider is a Baton Rouge writer covering Tesla, Elon Musk, EVs, and clean energy & supports Tesla's mission. Johnna also interviewed Elon Musk and you can listen here

Advertisement
Comments

News

Tesla Robotaxi ride-hailing without a Safety Monitor proves to be difficult

Published

on

Credit: Grok Imagine

Tesla Robotaxi ride-hailing without a Safety Monitor is proving to be a difficult task, according to some riders who made the journey to Austin to attempt to ride in one of its vehicles that has zero supervision.

Last week, Tesla officially removed Safety Monitors from some — not all — of its Robotaxi vehicles in Austin, Texas, answering skeptics who said the vehicles still needed supervision to operate safely and efficiently.

BREAKING: Tesla launches public Robotaxi rides in Austin with no Safety Monitor

Tesla aimed to remove Safety Monitors before the end of 2025, and it did, but only to company employees. It made the move last week to open the rides to the public, just a couple of weeks late to its original goal, but the accomplishment was impressive, nonetheless.

However, the small number of Robotaxis that are operating without Safety Monitors has proven difficult to hail for a ride. David Moss, who has gained notoriety recently as the person who has traveled over 10,000 miles in his Tesla on Full Self-Driving v14 without any interventions, made it to Austin last week.

He has tried to get a ride in a Safety Monitor-less Robotaxi for the better part of four days, and after 38 attempts, he still has yet to grab one:

Tesla said last week that it was rolling out a controlled test of the Safety Monitor-less Robotaxis. Ashok Elluswamy, who heads the AI program at Tesla, confirmed that the company was “starting with a few unsupervised vehicles mixed in with the broader Robotaxi fleet with Safety Monitors,” and that “the ratio will increase over time.”

This is a good strategy that prioritizes safety and keeps the company’s controlled rollout at the forefront of the Robotaxi rollout.

However, it will be interesting to see how quickly the company can scale these completely monitor-less rides. It has proven to be extremely difficult to get one, but that is understandable considering only a handful of the cars in the entire Austin fleet are operating with no supervision within the vehicle.

Continue Reading

News

Tesla gives its biggest hint that Full Self-Driving in Europe is imminent

Published

on

Credit: BLKMDL3 | X

Tesla has given its biggest hint that Full Self-Driving in Europe is imminent, as a new feature seems to show that the company is preparing for frequent border crossings.

Tesla owner and influencer BLKMDL3, also known as Zack, recently took his Tesla to the border of California and Mexico at Tijuana, and at the international crossing, Full Self-Driving showed an interesting message: “Upcoming country border — FSD (Supervised) will become unavailable.”

Due to regulatory approvals, once a Tesla operating on Full Self-Driving enters a new country, it is required to comply with the laws and regulations that are applicable to that territory. Even if legal, it seems Tesla will shut off FSD temporarily, confirming it is in a location where operation is approved.

This is something that will be extremely important in Europe, as crossing borders there is like crossing states in the U.S.; it’s pretty frequent compared to life in America, Canada, and Mexico.

Tesla has been working to get FSD approved in Europe for several years, and it has been getting close to being able to offer it to owners on the continent. However, it is still working through a lot of the red tape that is necessary for European regulators to approve use of the system on their continent.

This feature seems to be one that would be extremely useful in Europe, considering the fact that crossing borders into other countries is much more frequent than here in the U.S., and would cater to an area where approvals would differ.

Tesla has been testing FSD in Spain, France, England, and other European countries, and plans to continue expanding this effort. European owners have been fighting for a very long time to utilize the functionality, but the red tape has been the biggest bottleneck in the process.

Advertisement

Tesla Europe builds momentum with expanding FSD demos and regional launches

Tesla operates Full Self-Driving in the United States, China, Canada, Mexico, Puerto Rico, Australia, New Zealand, and South Korea.

Continue Reading

Elon Musk

SpaceX Starship V3 gets launch date update from Elon Musk

The first flight of Starship Version 3 and its new Raptor V3 engines could happen as early as March.

Published

on

Credit: SpaceX/X

Elon Musk has announced that SpaceX’s next Starship launch, Flight 12, is expected in about six weeks. This suggests that the first flight of Starship Version 3 and its new Raptor V3 engines could happen as early as March.

In a post on X, Elon Musk stated that the next Starship launch is in six weeks. He accompanied his announcement with a photo that seemed to have been taken when Starship’s upper stage was just about to separate from the Super Heavy Booster. Musk did not state whether SpaceX will attempt to catch the Super Heavy Booster during the upcoming flight.

The upcoming flight will mark the debut of Starship V3. The upgraded design includes the new Raptor V3 engine, which is expected to have nearly twice the thrust of the original Raptor 1, at a fraction of the cost and with significantly reduced weight. The Starship V3 platform is also expected to be optimized for manufacturability. 

The Starship V3 Flight 12 launch timeline comes as SpaceX pursues an aggressive development cadence for the fully reusable launch system. Previous iterations of Starship have racked up a mixed but notable string of test flights, including multiple integrated flight tests in 2025.

Interestingly enough, SpaceX has teased an aggressive timeframe for Starship V3’s first flight. Way back in late November, SpaceX noted on X that it will be aiming to launch Starship V3’s maiden flight in the first quarter of 2026. This was despite setbacks like a structural anomaly on the first V3 booster during ground testing.

“Starship’s twelfth flight test remains targeted for the first quarter of 2026,” the company wrote in its post on X. 

Continue Reading