Connect with us
alef aeronautics model a alef aeronautics model a

News

Alef Aeronautics’ flying car gains ‘limited’ FAA Approval

Credit: Alef Aeronautics

Published

on

Alef Aeronautics is the first company to receive limited FAA Special Airworthiness Certification, as its flying Model A, which was unveiled in October 2022, is heading toward production readiness.

The FAA is well aware of the progress and development of flying cars and is working toward policies that would develop policies for electric vertical takeoff and landing, or eVTOL, vehicles.

Alef is the first company to gain approval from the U.S. government agency to gain the Special Airworthiness Certificate, which limits the locations and purpose for which it is allowed to fly.

alef aeronautics model a driving

Credit: Alef Aeronautics

According to the Code of Federal Regulations, the holder of such a certificate is required to report any failures, malfunctions, or defects to the FAA during the development and testing of the aircraft.

The FAA goes through a rigorous process to ensure the vehicle in question is safe for operation and can be used in approved U.S. airspace for personal, restricted, light sport, experimental, and special purpose flights, according to SimpleFlying.comAircraft with this certificate usually cannot be operated for hire, nor can it carry passengers.

Advertisement

In terms of where Alef will be allowed to fly, we did not receive an answer from either the company or the FAA when we initially contacted them. When we do, we’ll update the article.

Essentially, the FAA’s certificate will allow Alef to begin testing the Model A before it can be released to the public with these capabilities.

“We’re excited to receive this certification from the FAA. It allows us to move closer to bringing people an environmentally friendly and faster commute, saving individuals and companies hours each week,” CEO Jim Dukhovny said. “This is a one small step for planes, one giant step for cars.”

Carrying “one or two occupants,” the $300,000 Model A will fly 110 miles on a charge or 200 miles on the road.

Advertisement

Tesla’s next-gen Roadster is expected to have “hovering” capabilities, but we are unconvinced it will fly in the same classification as the Model A.

I’d love to hear from you! If you have any comments, concerns, or questions, please email me at joey@teslarati.com. You can also reach me on Twitter @KlenderJoey, or if you have news tips, you can email us at tips@teslarati.com.

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

Elon Musk

Elon Musk launches TERAFAB: The $25B Tesla-SpaceXAI chip factory that will rewire the AI industry

Tesla, SpaceX, and xAI unveiled TERAFAB, a $25B chip factory targeting one terawatt of AI compute annually.

Published

on

By

Tesla TERAFAB Factory in Austin, Texas

Elon Musk took the stage over the weekend at the defunct Seaholm Power Plant in Austin, Texas, to officially unveil TERAFAB, a $20-25 billion joint venture between Tesla, SpaceX, and xAI that he described as “the most epic chip building exercise in history by far.” The announcement marks the most ambitious infrastructure bet Musk has made since Gigafactory 1 in Sparks, Nevada, and it fuses three of his companies into a single, vertically integrated AI hardware machine for the first time.

TERAFAB is designed to consolidate every stage of semiconductor production under one roof, including chip design, lithography, fabrication, memory production, advanced packaging, and testing.  At full capacity, the facility would scale to roughly 70% of the global output from the current world’s largest semiconductor foundry from Taiwan Semiconductor Manufacturing Company (TSMC).

Elon Musk’s stated goal is one terawatt of computing power annually, split between Tesla’s AI5 inference chips for vehicles and Optimus robots, and D3 chips built specifically for SpaceXAI’s orbital satellite constellation.

Tesla Terafab set for launch: Inside the $20B AI chip factory that will reshape the auto industry

Advertisement

The logic behind the merger of these three entities is rooted in a supply chain crisis Musk has been signaling for over a year. At Tesla’s Q4 2025 earnings call, he warned investors that external chip capacity from TSMC, Samsung, and Micron would hit a ceiling within three to four years. “We’re very grateful to our existing supply chain, to Samsung, TSMC, Micron and others,” Musk acknowledged at the Terafab event, “but there’s a maximum rate at which they’re comfortable expanding.” Building in-house was, in his framing, not a strategic option, but a necessity.

The space angle is where the announcement becomes genuinely unprecedented. Musk said 80% of Terafab’s compute output would be directed toward space-based orbital AI satellites, arguing that solar irradiance in space is roughly 5x greater than at Earth’s surface, and that heat rejection in vacuum makes thermal scaling viable. This directly feeds the SpaceXAI vision, which is betting that within two to three years, running AI workloads in orbit will be cheaper than doing so on the ground. The satellites, powered by constant solar energy, would effectively turn low Earth orbit into the world’s largest data center.

Will Tesla join the fold? Predicting a triple merger with SpaceX and xAI

Historically, this announcement threads together every major Musk initiative of the past two years: the xAI-SpaceX merger, Tesla’s $2.9 billion solar equipment talks with Chinese suppliers, the 100 GW domestic solar manufacturing push, the Optimus humanoid robot program, and Starship’s development. TERAFAB is the capstone that ties them into a single coherent architecture — chips made on Earth, launched by SpaceX, powered by Tesla solar, run by xAI, and ultimately extended to the Moon.

Advertisement

“I want us to live long enough to see the mass driver on the moon, because that’s going to be incredibly epic,”Musk said during the presentation.

Advertisement
Continue Reading

News

Rolls-Royce makes shocking move on its EV future

When Rolls-Royce unveiled its first all-electric model, the Spectre, in 2022, former CEO Torsten Müller-Ötvös declared the brand would cease production of internal combustion engine vehicles by the end of the decade.

Published

on

Rolls Royce Wheels
Credit: BMW Group

Rolls-Royce made a shocking move on its EV future after planning to go all-electric by the end of the decade. Now, the company is tempering its expectations for electric vehicles, and its CEO is aiming to lean on its legacy of high-powered combustion engines to lead it into the future.

In a significant reversal, Rolls-Royce Motor Cars has scrapped its ambitious plan to become an all-electric manufacturer by 2030. The luxury British marque announced the decision amid sustained customer demand for traditional combustion engines and shifting regulatory landscapes.

When Rolls-Royce unveiled its first all-electric model, the Spectre, in 2022, former CEO Torsten Müller-Ötvös declared the brand would cease production of internal combustion engine vehicles by the end of the decade.

The move aligned with the industry’s broader push toward electrification, promising silent, effortless power befitting the “Rolls-Royce of cars.”

Advertisement

However, new CEO Chris Brownridge, who assumed the role in late 2023, has reversed course. “We can respond to our client demand … we build what is ordered,” Brownridge stated.

The company will continue offering its iconic V12 engines, which remain a cornerstone of its heritage and appeal to discerning buyers who appreciate the distinctive sound and character. He noted the original pledge was “right at the time,” but “the legislation has changed.”

While not abandoning electric vehicles entirely, the Spectre remains in production, with an electric Cullinan option forthcoming; the decision marks the end of a strict all-EV timeline. Relaxed emissions regulations and slowing EV demand, evidenced by a 47 percent drop in Spectre sales to 1,002 units in 2025, forced the reconsideration.

It was a sign that perhaps Rolls-Royce owners were not inclined to believe that the company’s all-EV future was the right move.

Advertisement

Rolls Royce customers want more EVs, says company CEO

Rolls-Royce joins a growing roster of automakers reevaluating aggressive electrification targets.

Fellow luxury brand Bentley has pushed its full electrification from 2030 to 2035, while continuing to offer hybrids and ICE models. Mercedes-Benz walked back its 2030 all-EV goal, now aiming for about 50% electrified sales while keeping combustion engines into the 2030s. Porsche has abandoned its 80% EV sales target by 2030, delaying models and extending hybrids.

Mainstream giants are following suit. Honda canceled its U.S. EV plans, including the 0-Series and Acura RSX, facing a $15.7 billion hit as it doubles down on hybrids. Ford and General Motors have incurred tens of billions in writedowns, canceling models and pivoting to hybrids amid an industry total exceeding $70 billion in charges.

Advertisement

This trend reflects a pragmatic shift driven by infrastructure gaps, consumer preferences, and policy changes. In the ultra-luxury segment, where emotional connection reigns, automakers are prioritizing flexibility over rigid deadlines, ensuring brands like Rolls-Royce evolve without alienating their core clientele.

Continue Reading

News

Elon Musk teases expectations for Tesla’s AI6 self-driving chip

This optimistic timeline for tape-out—the stage where chip design is finalized before manufacturing—signals Tesla’s push to rapidly advance its silicon capabilities.

Published

on

Credit: Grok

Tesla CEO Elon Musk is outlining expectations for the AI6 self-driving chip, which is still two generations away. Despite this, it is already in the plans of the company and its serial entrepreneur CEO, who has high expectations for it.

Musk provided fresh details on the company’s aggressive AI hardware roadmap, spotlighting the upcoming AI6 chip designed to supercharge Tesla’s self-driving tech, humanoid robots, and data center operations.

In a post on X dated March 19, Musk stated, “With some luck and acceleration using AI, we might be able to tape out AI6 in December.”

This optimistic timeline for tape-out—the stage where chip design is finalized before manufacturing—signals Tesla’s push to rapidly advance its silicon capabilities.

The announcement builds on progress with the predecessor AI5. Earlier in January, Musk announced that the AI5 design was “in good shape” and “almost done,” describing it as an “existential” project for the company that demanded his personal attention on weekends.

He characterized AI5 as roughly equivalent to Nvidia’s Hopper class performance in a single system-on-chip (SoC) and Blackwell-level as a dual configuration, but at significantly lower cost and power usage.

Advertisement

Elon Musk is setting high expectations for Tesla AI5 and AI6 chips

Musk highlighted that AI5 “will punch far above its weight” thanks to Tesla’s co-designed AI software and hardware stack, making maximal use of every circuit. While capable of data center training tasks, it is primarily optimized for edge computing in Optimus robots and Robotaxi vehicles.

For AI6, Musk envisions substantial gains. “In the same half reticle and same process node, we think a single AI6 chip has the potential to match a dual SoC AI5,” he explained.

The company is targeting ambitious nine-month development cycles for future chips, allowing rapid iteration to AI7, AI8, and beyond. AI5/AI6 engineering remains Musk’s top time allocation at Tesla, with the CEO calling AI5 “good” and AI6 “great.”

Advertisement

Samsung is expected to manufacture the AI6 chips, following deals worth billions, while AI5 will leverage TSMC and Samsung production. These chips will form the backbone of Tesla’s Full Self-Driving system, enabling safer and more capable autonomy, alongside powering dexterous movements in Optimus bots and efficient inference in expanding data centers.

Tesla to discuss expansion of Samsung AI6 production plans: report

Musk has also restarted work on the Dojo 3 supercomputer project now that AI5 is progressing. Long-term plans include in-house manufacturing via the Terafab facility.

By accelerating chip development with AI tools, Tesla aims to reduce dependence on third-party GPUs and deliver high-performance, energy-efficient solutions tailored to its ecosystem. Success with AI6 could mark a major milestone in Tesla’s journey toward full autonomy and robotics leadership, though timelines remain subject to manufacturing realities.

Advertisement
Continue Reading