Connect with us

News

Apparent Tesla Cybercab castings are piling up in Giga Texas

The castings are quite interesting since they are different from the components used in the Model Y and Cybertruck.

Published

on

Credit: @JoeTegtmeyer/X

Tesla has stated that it will start the volume production of its Cybercab robotaxi next year, but it appears that the company is already busy piling up components for the upcoming vehicle. This was, at least, hinted at in recent aerial images taken from the Giga Texas complex.

Apparent Cybercab Castings

During a recent drone flyover, longtime Giga Texas watcher Joe Tegtmeyer spotted a growing number of castings being piled up around the factory complex. The castings are quite interesting since they are different from the components used in the Model Y and Cybertruck, which are both produced in the facility today. This has led to speculations that the mysterious castings are for the Cybercab, which is expected to reach volume production in 2026

Based on the images that were recently taken at the Giga Texas complex, it appears that Tesla is busy testing and likely validating the castings for its compact, two-seat robotaxi. Elon Musk has stated that the Cybercab will be a very high volume vehicle, after all, so Tesla has to make sure that the vehicle’s components are fully refined by the time it enters full production.

One Cybercab Every Five Seconds

During Tesla’s Q1 2025 All-Hands meeting, CEO Elon Musk shared some details about the Cybercab’s production line. As per Musk, the Cybercab’s line would resemble a high-speed consumer electronics line instead of a regular automotive production line. This, together with the company’s “Unboxed” process, should pave the way for the Cybercab to hit a production rate of about 2 million vehicles per year.

“If you’ve seen the design of the Cybercab line, it doesn’t look like a normal car manufacturing line. It looks like a really high-speed consumer electronics line. In fact, the line will move so fast that that actually people can’t even get close to it. I think it’ll be able to produce a car ultimately in less than 5 seconds,” Musk stated.

Advertisement

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

News

Tesla launches its most inexpensive trim of new Model Y

Tesla has launched the Long Range Rear-Wheel-Drive configuration of the new Model Y, its most-affordable version yet.

Published

on

Tesla has officially launched the cheapest trim of the new Model Y build, the Long Range Rear-Wheel-Drive configuration, in various markets.

The company has been slowly rolling out configurations of the new Model Y since first launching it earlier this year. At first, it made available the ‘Launch Series’ version of the new Juniper build. Then, it launched the Long Range All-Wheel-Drive several weeks later.

Now, it has officially brought the new Model Y’s third trim level with the Long Range Rear-Wheel-Drive, starting at $44,990 before federal tax credits or local incentives:

Specs run at 357 miles of range, 125 MPH top speed, and a 5.4-second 0-60 MPH acceleration rate. This compares to the 327 miles of range the Long Range All-Wheel Drive gets. The cars have the same top speed, but the All-Wheel-Drive gets from 0-60 MPH in just 4.6 seconds.

Tesla is still more than aware there is a demand for the Rear-Wheel-Drive configurations, as it has also launched the same powertrain in the Cybertruck recently, but in a much more stripped-down version, void of premium interior materials, a power tonneau, and other features.

Deliveries are set to begin in 3-5 weeks, according to the design studio. We would expect to see these vehicles on lots at Gigafactory Texas within the next week or so.

Tesla made several improvements to the new Model Y from the legacy version, which was the best-selling car in the world twice. Tesla improved cabin noise with acoustic glass throughout, which dampens sound and makes for a much more pleasant environment in the cabin.

Additionally, the interior was redesigned and has become more luxurious with additions like cooling and heated seats throughout. Tesla paid attention to the little things, going as far as improving the noise level of closing doors.

These improvements are all included on the new Model Y, which we’ve had the opportunity to spend plenty of time with. Here’s my first impressions piece from early April, and my experience with Tesla’s new weekend-long Demo Drive of the new Model Y.

Continue Reading

Elon Musk

Tesla to fix an FSD driver monitoring annoyance, Elon Musk hints

Elon Musk seems welcome to a change in Tesla’s Driver Monitoring suite.

Published

on

tesla cabin facing camera
Tesla's Cabin-facing camera is used to monitor driver attentiveness. (Credit: Andy Slye/YouTube)

CEO Elon Musk hinted in an X post that Tesla is about to fix a Full Self-Driving driver monitoring annoyance.

When using Tesla’s Full Self-Driving suite, the newest “Supervised” version allows drivers to use the vehicle without actually holding onto the steering wheel. However, a cabin-facing camera monitors the driver’s eyes, ensuring they are paying attention to the road and not abusing the suite’s capabilities.

If the vehicle recognizes multiple instances of drivers taking their eyes off the road, Full Self-Driving will be unavailable for the rest of the drive. Ending up in FSD fail is never a fun time.

However, there are some instances when the suite is perhaps a tad too critical of a driver and their eyes if they are not always looking at the road. For example, in a Tesla, adjusting things like the cabin temperature, the position of side mirrors, or even the speed offset requires the driver to take their eyes off the road for a short period of time — usually less than ten seconds.

If operating on FSD, the vehicle will alert you to look back at the road, even if you’re traveling at a low rate of speed and you only take a few seconds to adjust a setting.

During my weekend Demo Drive of the new Model Y, I experienced this:

It appears a change could be welcome by Musk, who agreed that the warning seems excessive. How it will be changed remains to be seen, but it seems safer to be adjusting settings while FSD is active as opposed to trying to do it while driving manually:

It is good that FSD operates cautiously, as plenty of people have abused its capabilities in the past. When accidents happen due to driver irresponsibility, Tesla is not liable, but media headlines paint the picture that driving the vehicles is dangerous. In reality, Teslas travel more miles without an accident than the national average.

Tesla Vehicle Safety Report shows Autopilot is 10x better than humans

The change would likely be welcomed by many drivers, who have also complained about driver monitoring giving warnings when doing something like taking a bite of food.

Continue Reading

News

Tesla is using this technique to expand Supercharging outside the U.S.

Tesla’s pre-fabricated Superchargers are making expansion easier for the company all over the world

Published

on

Credit: Tesla Charging | X

Tesla is using a technique that it first used in 2021 to expand its Supercharging presence outside the United States.

In April 2021, Tesla installed its first pre-fabricated Supercharging stalls in Utah, helping streamline installation and make EV charging more widely available as the COVID-19 pandemic continued to surge on.

Tesla still utilizes pre-fabricated Superchargers, which are built at its Buffalo Gigafactory, and they are a huge asset to the company, considering they streamline the entire installation process. The chargers can be installed on a concrete slab within a matter of hours, bringing a station with numerous plugs online in the matter of a day’s work.

Tesla Semi helps install prefab Superchargers at Laguna Seca

However, Tesla is not confining this strategy to its U.S. locations only. It recently opened its first Supercharger in Estonia, where Tesla has planned to open a station for over 12 years.

It is finally set to launch its first Supercharger in Estonia this week, and North American Charging Head Max de Zegher stated that the company is utilizing the pre-fabrication technique to streamline the installation:

de Zegher also said the pre-fab Superchargers are Tesla’s “highest quality builds.”

Tesla has said in the past that these pre-fabricated stalls are not only more efficient in terms of the overall installation process, but they are also more cost-effective and can help save the company money on what is not necessarily a cheap part of the business.

These cost savings are then passed on to the drivers, de Zegher said in a breakdown of the pre-fab process last year. This is just one way the EV maker continues to streamline its manufacturing processes, and it does not only have to do with the vehicles, but also the equipment that charges them.

As Teslas and other EVs are becoming more popular and the charging infrastructure is still trying to catch up, pre-fab Superchargers are a great technique and strategy the company can use to expand availability. Within a matter of days, Tesla can add stalls to a station, making it easily accessible to consumers with less risk of a wait.

Continue Reading

Trending