Connect with us

News

German officials criticize anti-Tesla Giga Berlin protests

Credit: @tobilindh/X

Published

on

German officials have expressed their disappointment at activists’ “days of action” against Tesla Giga Berlin-Brandenburg. This was true for Federal Economics Minister Robert Habeck (Greens) and the East Brandenburg Chamber of Commerce and Industry (IHK), both of whom shared their thoughts with German media. 

In a comment to Funke media group (via rbb24), Minister Habeck noted that once the protesters attempted to break into Tesla Giga Berlin-Brandenburg’s premises, things were no longer reasonable. This was because in Grünheide, the border of the protest was the border fence of Tesla’s premises. “The protest ends there, the criminal liability begins,” the Minister said. 

Minister Habeck also criticized how the activists targeted Tesla due to the company’s production of electric cars. “No one can have an interest in Germany without automobile production. We are campaigning for the cars of the future to be produced here — and for jobs and added value to be kept here. And Tesla also builds cars like that,” Minister Habeck said. 

The East Brandenburg Chamber of Commerce and Industry is in the same page, with Monique Zweig, general manager of IHK Ostbrandenburg, telling rbb24 on Monday that the anti-Tesla activists’ actions will likely have adverse effects on the economy of the region. “We just had one company settle here in the region, which was a ray of hope for all young people who wanted to stay here in the region. This will be permanently damaged by these actions,” Zweig said. 

Advertisement

IHK department head Robert Radzimanowski also noted that in general, several companies in East Brandenburg have already adopted a rather pessimistic outlook about the future, with a current economic report reportedly indicating that 80% of companies rate their situation as satisfactory or bad. A low willingness to invest in the area was also observed. The “days of action” against Tesla Giga Berlin-Brandenburg likely deterred more investors, Radzimanowski noted. 

Radzimanowski also criticized the way the dispute surrounding Giga Berlin-Brandenburg was going. “The local politicians in Grünheide and the region have their names and faces in the public eye. And opposite them is a group of masked people who in the end threaten to come back if – from their point of view – the right decision is not made. We find that very strange,” the IHK official said. 

Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.

Advertisement

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla Cybercab display highlights interior wizardry in the small two-seater

Photos and videos of the production Cybercab were shared in posts on social media platform X.

Published

on

Credit: Tesla Robotaxi/X

The Tesla Cybercab is currently on display at the U.S. Department of Transportation in Washington, D.C., and observations of the production vehicle are highlighting some of its notable design details. 

Photos and videos of the production Cybercab were shared in posts on social media platform X.

Observers of the Cybercab display unit noted that the two-seat Robotaxi provides unusually generous legroom for a vehicle of its size. Based on the vehicle’s video, the compact two-seater appears to offer more legroom than Tesla’s larger vehicles such as the Model Y, Model X, and Cybertruck.

The Cybercab’s layout allows Tesla to dedicate nearly the entire cabin to passengers. The vehicle is designed without a steering wheel or pedals, which helps maximize interior space.

Advertisement

Footage from the display also highlights the Cybercab’s large center screen, which is positioned prominently in front of the passenger bench. The display appears intended to provide entertainment and ride information while the vehicle operates autonomously.

Images of the vehicle also show an additional camera integrated into the Cybercab’s C-pillar. The extra camera appears to expand the vehicle’s field of view, which would be useful as Tesla works toward fully unsupervised Full Self-Driving.

Tesla engineers have previously explained that the Cybercab was designed to be highly efficient both in manufacturing and in operation. Cybercab Lead Engineer Eric E. stated in 2024 that the Robotaxi would be built with roughly half the number of parts used in a Model 3 sedan.

“Two seats unlocks a lot of opportunity aerodynamically. It also means we cut the part count of Cybercab down by a substantial margin. We’re gonna be delivering a car that has roughly half the parts of Model 3 today,” the Tesla engineer said.

Advertisement

The Tesla engineer also noted that the Cybercab’s cargo area can accommodate multiple golf bags, two carry-on suitcases, and two full-size checked bags. The trunk can also fit certain bicycles and a foldable wheelchair depending on size, which is quite impressive for a small car like the Cybercab.

Continue Reading

Elon Musk

Elon Musk’s xAI wins permit for power plant supporting AI data centers

The development was reported by CNBC, citing confirmation from the Mississippi Department of Environmental Quality (MDEQ).

Published

on

Mississippi regulators have approved a permit allowing Elon Musk’s artificial intelligence company xAI to construct a natural gas power plant in Southaven. The facility is expected to support the company’s expanding AI infrastructure tied to its Colossus data center operations near Memphis.

The development was reported by CNBC, citing confirmation from the Mississippi Department of Environmental Quality (MDEQ).

According to the report, regulators “voted to approve the permit” of xAI subsidiary MZX Tech LLC to construct a power plant featuring 41 natural gas-burning turbines “after careful consideration of all public comments and community concerns.”

The Mississippi Department of Environmental Quality stated that the permit followed a regulatory review process that included public comments and community input. Jaricus Whitlock, air division chief for the MDEQ, stated that the project met all applicable environmental standards.

Advertisement

“The proposed PSD permit in front of the board today not only meets all state and federal permitting regulations, but goes above and beyond what is required by law. MDEQ and the EPA agree that not a single person around our facilities will be exposed to unhealthy levels of air pollution,” Whitlock stated.

The planned facility will help provide electricity for xAI’s AI computing infrastructure in the Memphis region.

The Southaven project forms part of xAI’s efforts to scale computing capacity for its artificial intelligence systems.

The company currently operates two major data centers in Memphis, known as Colossus 1 and Colossus 2, which provide computing power for xAI’s Grok AI models. xAI is also planning to build another large data center in Southaven called Macrohardrr, which would be located in a warehouse previously used by GXO Logistics.

Advertisement

Large-scale AI training requires substantial computing power and electricity, prompting technology companies to develop dedicated energy infrastructure for their data centers.

SpaceX President Gwynne Shotwell previously stated that xAI plans to develop 1.2 gigawatts of power capacity for its Memphis-area AI supercomputer site as part of the federal government’s Ratepayer Protection Pledge. The commitment was announced during an event with United States President Donald Trump.

“As part of today’s commitment, we will take extensive additional steps to continue to reduce the costs of electricity for our neighbors. xAI will therefore commit to develop 1.2 GW of power as our supercomputer’s primary power source. That will be for every additional data center as well. We will expand what is already the largest global Megapack power installation in the world,” Shotwell said.

“The installation will provide enough backup power to power the city of Memphis, and more than sufficient energy to power the town of Southaven, Mississippi where the data center resides. We will build new substations and invest in electrical infrastructure to provide stability to the area’s grid.”

Advertisement
Continue Reading

Elon Musk

Tesla China teases Optimus robot’s human-looking next-gen hands

The image was shared by Tesla AI’s account on Weibo and later reposted by Tesla community members on X.

Published

on

Credit: Tesla China

A new teaser shared by Tesla’s China team appears to show a pair of unusually human-like hands for Optimus. 

The image was shared by Tesla AI’s account on Weibo and later reposted by Tesla community members on X.

As could be seen in the teaser image, the new version of Optimus’ hands features proportions and finger structures that look strikingly similar to those of a human hand. Their appearance suggests that they might have dexterity approaching that of a human hand.

If the image reflects a new generation of Optimus’ hands, it could indicate Tesla is continuing to refine one of the most critical components of its humanoid robot.

Advertisement

Hands are widely viewed as one of the most difficult engineering challenges in robotics. For Optimus to perform complex real-world work, from manufacturing tasks to household activities, its hands would need to be the best in the industry.

Elon Musk has repeatedly described Optimus as Tesla’s most important long-term product. In posts on social media platform X, Musk has stated that Optimus could eventually become the first real-world Von Neumann machine.

In theory, a Von Neumann machine is a self-replicating system capable of building copies of itself using available materials. The concept was originally proposed by mathematician John von Neumann in the mid-20th century.

“Optimus will be the first Von Neumann machine, capable of building civilization by itself on any viable planet,” Musk wrote in a post on X.

Advertisement

If Optimus is expected to carry out complex work autonomously in the future, high levels of dexterity will likely be essential. This makes the development of advanced robotic hands a key step towards Musk’s long-term expectations for the product.

Continue Reading