Connect with us

News

Mazda adopts Tesla’s North American Charging Standard (NACS) in Japan

Mazda’s decision to adopt Tesla’s standard is intended to provide more convenience to customers.

Published

on

Tesla-nacs-north-american-standard
(Credit: Tesla)

Japanese automaker Mazda Motor Corporation has announced that it has reached an agreement with American electric car maker Tesla to adopt the North American Charging Standard (NACS) for its EVs. 

The update was shared by Mazda in a press release.

Mazda’s NACS Commitment

As per Mazda in its press release, NACS will be adopted for battery electric vehicles that will be launched in Japan from 2027 onward. This is quite interesting as Tesla’s NACS system will be used by Mazda within Japan. As per the automaker, its decision to adopt Tesla’s standard is intended to provide more convenience to customers. 

“Mazda adopted NACS to provide customers with greater convenience by a broader range of charging options. This will provide Mazda BEV customers with access to Tesla Superchargers across Japan. Mazda BEVs will be compatible with other charging standards besides NACS with the use of adapters,” Mazda wrote in its press release.

Advertisement

Not the Only Japanese NACS Adopter

Interestingly enough, Mazda is not the first Japanese automaker to adopt NACS to take advantage of Tesla’s Supercharger Network in Japan. In September last year, Sony Honda Mobility announced that it was adopting NACS for its AFEELA electric vehicles. While AFEELA’s EVs are expected to be initially available in the United States in 2025, the vehicles will also be coming to Japan later on.

Mazda’s adoption of Tesla’s charging standard was praised by Tesla Director of Charging Max de Zegher, who noted that it is only a matter of time before NACS becomes the standard in Japan and other countries. NACS has so far been adopted widely by electric car makers in the United States.

“NACS becoming the standard in Japan (and South Korea) seems like only a matter of time now. It’s also great to see other fast-charging networks starting to install NACS in Japan. Tesla Charging is accelerating the transition to NACS, for the industry to get clarity faster. Vehicle manufacturers also don’t want to build market-specific variants— like CHAdeMO just for Japan or CCS1 just for South Korea,” the Tesla executive wrote in a post on X.

Advertisement

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla faces Full Self-Driving pushback in EU over ‘speeding’

Published

on

Credit: Tesla

A new report from Reuters claims that a transport authority in Sweden is pushing back against the approval of Tesla’s Full Self-Driving suite because it will travel over speed limits.

The report says the Swedish Transport Administration (TRV) recommends the European Union votes against FSD’s approval. TRV believes it should not be approved until Tesla disables FSD’s ability to speed.

TRV sent a letter to the European Union’s Technical Committee on Motor Vehicles (TCMV), which is set to meet on June 30 to discuss the potential approval of the Tesla FSD suite in the country. Tesla, which has received various approvals in Europe over the past two months, has not provided a comment.

Tesla Full Self-Driving gets first-ever European approval

Teslas operating on FSD do travel over the speed limit, depending on the Speed Profile that is chosen. Drivers have the ability to disengage FSD at any point; Tesla specifically states that those supervising the suite are responsible for its actions.

Let’s cut to the chase: humans operating any vehicle speed almost daily in the United States. Realistically, speed limits in the U.S. are more frequently treated as speed minimums. However, other countries are different, and driving behaviors are less aggressive.

TRV believes that “allowing automated systems to systematically exceed legal speed limits…risks undermining both the legal framework and the expected safety benefits of ​vehicle automation,” the report stated. It’s surprising that Tesla has not received this claim from other countries previously.

This could be a good argument to bring Max Speed back, the setting that previously allowed the driver to choose the absolute fastest the car would travel.

This would still put the responsibility of supervision in the hands of the driver. It would allow the driver to choose whether the car would travel over the speed limit or not, acknowledging that they set the speed, and if they get pulled over, there would be no ability to argue it.

However, it does not seem as if this is something Tesla will do, especially considering many U.S. drivers have requested the feature in an effort to eliminate speeding or at least tone it down. The company has not shown any interest in bringing it back.

Tesla has approvals for FSD in Europe in Estonia, Lithuania, Denmark, the Netherlands, and Belgium.

Continue Reading

Elon Musk

Tesla teases greater Grok FSD integration and ‘Banish’ feature ‘in about 3 months’

Published

on

Credit: Tesla

Tesla is going to let you guide Full Self-Driving with Grok in 3 months, CEO Elon Musk confirmed on X.

The response from Musk, which revealed Tesla plans to allow drivers to effectively control the car and its navigation more explicitly using Grok, puts the feature for about September.

A Tesla owner said that Full Self-Driving is great, but owners should be able to “converse with Grok like we can with an Uber driver.” She then used examples like, “Grok, turn right here,” and “Drop us off right here, we’ll walk due to traffic,” and finally,” Drop at entrance first, then park far away.”

Coincidentally, the final piece of dialogue would also mean features like Banish are potentially on the way soon.

Banish is also referred to as “Reverse Summon,” and would enable the car to self-park while dropping occupants off at their destination.

This would be a great way to improve the overall experience while supervising FSD. Navigation is already a major painpoint that many owners complain about. Manual overrides when a maneuver is requested or canceled (like using the turn signal stalk to override a navigation route), do not always work.

The feature could be especially useful in street parking scenarios in a city, where spots are sometimes tough to come by. Many of us who grab dinner in a more populated area will park a street or two over from wherever we’re going, because sometimes you know that’s the best you will get. If a driver using FSD could say, “Hey Grok, turn right here on Queen St. and park in that open spot on the right,” it could save a lot of confusion FSD might have on its own.

Musk teased that a similar feature was “coming” back in February:

Tesla Full Self-Driving set to get an awesome new feature, Elon Musk says

It is certainly surprising that Tesla is doing it at this point. The company’s more recent moves have been more evident of taking control and inputs away from humans and putting them in the AI’s hands more frequently. The biggest example of this was taking away Max Speed in AI4 cars, giving us Speed Profiles, and not having any input on the fastest speed the car will travel.

Of course, giving navigation preferences to Grok is availble already in Teslas, but not at the drop of a hat. Instead, you can suggest a certain route at the beginning of your drive.

Here’s an example of that from December:

Finally, the original post that Musk responded to mentioned a parking preference after dropping off the occupants, which describes the Banish feature that Tesla has teased for years.

We’re not sure if Musk was responding more to the ability to guide the car with Grok, or whether he also was including Banish in the three-month prediction timeframe.

Continue Reading

News

Tesla Cybercab has one important piece that AI4 cars might need for FSD

Published

on

Credit: @tpgoebel | X

A close-up image of a Cybercab engineering vehicle in Peabody, Massachusetts, reveals a compact triangular side repeater camera housing equipped with an integrated washer mechanism.

This seemingly small hardware addition could prove to be one of the most critical components for achieving reliable, unsupervised Full Self-Driving (FSD) — not just for the dedicated Robotaxi but potentially for existing AI4-equipped vehicles as well.

The washer system’s importance cannot be overstated in Tesla’s vision-only autonomy approach. Cameras are the sole sensory input for the neural networks powering FSD, constantly interpreting the environment for safe navigation. In real-world conditions, however, lenses quickly accumulate rain, snow, mud, dust, or road spray.

Many of us Tesla owners, especially those who deal with any sort of winter weather at all, know the all-too-common alert that pops up when cameras are obstructed:

Even brief obstructions can drop perception confidence, trigger safety disengagements, or force the vehicle to pull over, although these are relatively rare. Instead, most of the time, the camera will need a wipe from the owner next time they stop the car.

But unlike human drivers who can manually clear their view, a Robotaxi operating 24/7 without a steering wheel or mirrors must maintain pristine vision autonomously. The Cybercab’s side repeater washer delivers targeted cleaning bursts precisely where needed for merging, lane changes, and blind-spot monitoring — functions that demand uninterrupted visibility from the external cameras:

This hardware directly tackles a known pain point in current FSD deployments. Owners frequently report camera-related alerts during inclement weather, which is understandable, but needs to be solved for a true autonomous experience.

For a production Robotaxi fleet aiming for high utilization and minimal downtime, robust washer systems represent a foundational reliability upgrade; essentially, they’re a must-have. Early sightings suggest the design may extend to rear cameras as well, creating a comprehensive cleaning architecture that keeps the entire vision suite operational in harsh environments.

Without it, even the most advanced neural nets struggle when their “eyes” are compromised.

What Does This Mean for AI4 Cars?

This Cybercab detail raises timely questions for AI4 cars already on the road. While Hardware 4 delivers superior compute and camera resolution compared to earlier versions, production models typically lack dedicated side and rear washers. Tesla has included them on Model Y robotaxis that it is using in the fleet:

Tesla Robotaxi has a highly-requested hardware feature not available on typical Model Ys

As Tesla refines unsupervised FSD for broader release, the gap in environmental resilience becomes evident. Software improvements can help mitigate issues, but they cannot fully replace physical cleaning in heavy rain or muddy conditions. Analysts and owners increasingly speculate that AI4 vehicles may eventually require similar washer retrofits — or a future AI4.5 variant — to match the Cybercab’s all-weather readiness and support the same level of autonomy.

As testing progresses, the Cybercab’s washer mechanism highlights Tesla’s pragmatic focus on real-world robustness. It may well become the hardware piece that determines how quickly and reliably FSD scales from prototypes to everyday vehicles.

Continue Reading