Connect with us

News

SpaceX installs booster on launch pad, stacks orbital Starship to full height

Published

on

Hours after SpaceX outfitted the first orbital Starship prototype with all six of its Raptor engines, the company has installed the vehicle’s nose section, effectively completing its basic structure.

At the same time as teams are now working around the clock to weld Starship S20’s nose and tank sections together, SpaceX attached the first orbital-class Super Heavy – Booster 4 (B4) – to a massive crane that lives at the launch pad. Around 3pm CDT (UTC-5), after allowing a minor storm to pass through the area, Super Heavy B4 lifted free from its transport stand, raised 30-40 meters into the air, and was carefully lowered onto the orbital pad’s ‘launch table.’

Together, Ship 20 and Booster 4 represent both stages of the integrated vehicle that will support Starship’s first orbital test flight – a mission that’s expected to occur before the end of the year. In the interim, a great deal of work remains, but SpaceX is far closer than it’s ever been with both an orbital-class Starship and Super Heavy nearly complete.

Of course, both those rocket stages have plenty of crucial steps to check off before SpaceX can truly consider them ready for flight. Like all Starship prototypes, Ship 20 will need to complete proof testing after assembly is complete. Notably, Ship 20 is the first Starship prototype with mounting points for a full six Raptors, meaning that it will almost certainly be put through an even more rigorous proof test in which hydraulic rams will simulate the thrust of those engines.

In fact, one of SpaceX’s two suborbital launch mounts has already been fitted with a three-ram jig used to test several earlier prototypes and – more importantly – modified with three rams to simulate three Raptor Vacuum engines. The engines installed on Ship 20 on August 3rd are likely just a fit test or practice for the real deal and will need to be uninstalled for said hydraulic ram cryo proof in the near future.

The same might be true for Super Heavy Booster 4, which had 29 Raptor engines installed in 14 hours in a spectacular and unprecedented feat of rocket assembly. At least five of its engines appear to have never been static fired, implying that those engines – at minimum – will likely be removed and sent back to SpaceX’s McGregor development facilities for individual qualification testing before being declared ready for flight.

Advertisement
-

Ultimately, regardless of when they may or may not be ready to be fired, stacked into a fully integrated Starship rocket, or even launched, the vast majority of orbital test flight hardware is complete or already at the launch pad.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

Investor's Corner

SpaceX reports its second earnings today: here’s what to expect

Published

on

Credit: SpaceX

SpaceX (NASDAQ: SPCX) will report its second public earnings call today since its IPO earlier this year, and there are a few things we expect to hear about, as well as Wall Street analysts, who have already outlined their expectations for the call.

Wall Street analysts have a consensus of $12.72 billion in revenue and an earnings per share (EPS) of $0.13. These are broken down into three sectors: Space, Connectivity, and AI/SI, which are perceived in this way:

  • Space: $1.41 billion
  • Connectivity: $4.84 billion
  • AI/SI: $6.47 billion

Other outlets cluster near $12.8 or $12.9 billion in revenue and $0.14 – $0.15 EPS. This implies a roughly 65 percent sequential growth from Q2’s $7.81 billion, driven mostly by AI/SI, with the first post-IPO positive EPS expected.

SpaceX just launched its secret Starfall saucer again

Here are the three things to watch for on the call:

AI Revenue Ramp and the $100B+ ARR target

AI is truly the swing factor for SpaceX, and analysts expect it to roughly double from Q2’s $2.56 billion and become about half of total revenue. Management previously guided to a $100 billion+ annualized run rate by December, including the Cursor acquisition, which was $60 billion, to close the quarter.

SpaceX makes first acquisition post-IPO

Listen for updates on SpaceX’s compute capacity, especially pertaining to its contracts with Google, Anthropic, and others, revenue per watt, any new deals, and Cursor’s early contribution.

Starlink/Connectivity Metrics and Mobile Expansion

Connectivity remains a main profit engine for SpaceX. Subscriber additions will be something to pay attention to, as Q2 ended at 12 million and previews are looking at 14 million for this quarter. Additionally, ARPU trends, enterprise and government growth, and any commentary on Starlink Mobile will be something to pay attention to, especially following the recent low-band spectrum deal and FCC-related constellation approvals.

Capex Trajectory, Cash Burn/FCF, and Starship/Operational Updates

Q2 capex of roughly $18.4 billion weighed on the stock. Investors will look to scrutinize Q3 spending levels, any guidance on the pace into Q4/2027, free cash flow, backlog, and liquidity. Operational color on Starship (Flight 14 milestones and Flight 15 timing/reusability progress), Falcon cadence, and government/NASA contracts are also in focus.

Of course, there will also be some speculation on the potential Tesla-SpaceX merger, but there was nothing mentioned in the company’s proxy it sent earlier this week.

SpaceX will report earnings after market close today and will stream the call on X.

Interested in ordering a Tesla? Use my referral code for three free months of Full Self-Driving (Supervised) here

Continue Reading

News

SpaceX just launched its secret Starfall saucer again

SpaceX launched its Starfall capsule again on Bandwagon-5, this time listed openly beside rideshare customers.

Published

on

By

An artist’s illustration of a SpaceX Starfall capsule reentering Earth’s atmosphere. (Image: SpaceX)
An artist’s illustration of a SpaceX Starfall capsule reentering Earth’s atmosphere. (Image: SpaceX)

SpaceX launched its Starfall reentry capsule for the second time on Tuesday morning, flying it as the payload of the Bandwagon-5 rideshare mission. Falcon 9 lifted off from Space Launch Complex 40 in Florida at 7:04 a.m. ET with 32 payloads, and the first stage booster, on its 19th flight, landed on the droneship A Shortfall of Gravitas about nine minutes later.

Starfall was scheduled to separate last, 2 hours and 48 minutes after liftoff. The final customer satellite on SpaceX’s mission timeline comes off the upper stage about an hour and nine minutes in, which left a long gap before the capsule was due to be released alone. SpaceX later posted that the payload deployment sequence is complete. At liftoff, the company said Starfall “enables affordable, routine access to a microgravity environment, providing unique opportunities for on-orbit manufacturing, scientific research, and testing.”

As Teslarati reported before the first Starfall flight, SpaceX made no public announcement about the vehicle then, and nearly everything known came from FAA and FCC filings. This time Starfall is an item name on the official mission page, listed beside paying rideshare customers. SpaceX has still not said what, if anything, is aboard this Starfall, Spaceflight Now noted.

The FAA’s environmental assessment from May describes a disk about 10.2 feet wide and 2.5 feet tall that weighs roughly 4,600 pounds and can bring 2,200 pounds of payload back to Earth.

Interestingly, the same rocket also carries a competitor’s hardware. Varda Space Industries launched its W-Series 7 capsule on Bandwagon-5, a spacecraft about three times smaller than Starfall that will test whether microgravity can improve the solubility of a cancer drug called Protac. It is Varda’s ninth reentry capsule, and W-8 and W-9 launched earlier this month on Transporter-18. SpaceX has been Varda’s launch provider since the company’s first Falcon 9 rideshare contract in 2021.

SpaceX has not published where or how this Starfall will come down. The preview we ran in June described a recovery from the Pacific Ocean, and the company has not said whether this flight follows the same plan. The launch also arrives hours before SpaceX posts its third quarter results after the market closes, a report we previewed earlier this week.

Continue Reading

Elon Musk

The Boring Company’s latest Tesla tunnel truck mod “fits like a glove”

The Boring Company has modified a Tesla powered tunnel truck to carry freight containers underground.

Published

on

By

the-boring-company-tesla-robotaxi

The Boring Company has found a second job for the Tesla hardware it already runs underground. In a post on X, Elon Musk’s tunneling company showed its latest Prufrock Liner Truck modified to carry a standard 20 foot shipping container. “Using TBC tunnels to transport freight,” the company wrote. “The latest Prufrock Liner Truck (using Tesla Model 3 batteries and drive units) has been modified to carry a standard 20′ shipping container. Fits like a glove!”

The photo shows a red container sitting on a long, low white chassis parked outside, with drive hardware visible at one end. The Boring Company did not say where or when freight hauling would start, which customers it has in mind, or how many trucks it is converting.

Until now, the liner trucks have hauled concrete. Teslarati reported in August on Liner Truck 3, which uses Model 3 battery packs and drive units to move more than 22,000 pounds of precast tunnel segments to the boring machine. It has 28 miles of range, tops out at 12 mph, and is piloted remotely from the company’s operations center in Texas. The freight version appears to be the same platform with a different bed, and The Boring Company has not said whether it will also be remotely piloted.

Freight has been on the company’s menu for years. When TBC updated its product lineup in 2021, its freight tunnel was described as sized to fit a standard shipping container, “barely.” The company later used the idea at Tesla’s own factory, where Prufrock 3 dug a tunnel to Giga Texas that now moves finished Cybertrucks away from the production line.

The Boring Company closed a $3 billion Series D in September at a $23 billion valuation, and Teslarati has covered how that money is tied to a UAE tunneling push and a faster Nashville build. In Nashville, Prufrock MB1 and MB2 are mining at the same time, and a third machine is expected to launch in late October. Each machine needs a steady supply of liner trucks, so any design that works for segments and containers alike gives the company more use out of the same Tesla parts.

The Vegas Loop remains the only Boring Company system open to the public, and it moves passengers in Tesla vehicles. A freight service would be a separate product, and the post gave no indication that one is close to launch. For now, it is a truck, a container and a short caption saying they fit together.

Continue Reading