Connect with us
catl catl

News

Tesla supplier CATL poised to start mass production of M3P batteries this year

Credit: CATL

Published

on

Tesla supplier Contemporary Amperex Technology Co. Limited (CATL) is reportedly set to start the production of its next-generation M3P batteries. The M3P batteries are expected to offer 15% greater energy density than traditional lithium iron phosphate (LFP) batteries, which are used in vehicles such as the Model 3 RWD today.

In August last year, CATL announced that it was working on new battery technology. And during an investor briefing last Friday, Chairman Zeng Yuqun noted that the new battery’s development had been successful. The executive also noted that the new battery would cost less and perform better than nickel and cobalt-based competitors. 

The M3P batteries feature an energy density that’s about 15% higher than the 210 Wh/kg in current LFP batteries. This energy density should enable vehicles to achieve a range of about 700 km (430 miles) per charge, at least if it’s used alongside CATL’s next-generation battery pack technology, as noted in a Reuters report. For context, the base Tesla Model 3 currently uses LFP batteries that are supplied by CATL.

CATL is already a notable presence in the battery sector. With this in mind, the introduction of M3P batteries would likely encourage customers such as Tesla to embrace the new technology. The M3P batteries, provided that they are successful, should also make CATL even more prolific in the market. 

Advertisement

CATL already accounts for over one-third of total battery sales, providing EV batteries to major automakers such as Volkswagen, BMW, and Ford. One of the company’s primary customers, of course, is Tesla, the undisputed leader in the electric vehicle sector.

The significance of the partnership between CATL and Tesla is emphasized by the battery giant’s establishment of a new 70 GWh factory just 5 km from Tesla’s Gigafactory Shanghai. Tesla’s Shanghai factory is currently the company’s largest by volume, providing Model 3 sedans and Model Y crossovers to both the international and domestic markets. 

CATL’s prominence in the battery sector has attracted the attention of notable leaders, including Chinese President Xi Jinping. The Chinese president noted earlier this month that he was “pleased and concerned” about CATL’s rise. CATL would likely rise even more in the coming years, however, especially considering the plans of companies like Tesla, as well as the continued emergence of the electric vehicle sector. 

Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.

Advertisement

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

Tesla’s last chance version of the flagship Model X is officially gone

The Signature Edition was no ordinary Model X Plaid. Offered exclusively by invitation to select existing Tesla owners, it represented the final production batch of the current-generation Model X before manufacturing at Fremont ends.

Published

on

Tesla enabled a last-chance version of its two flagship vehicles, the Model S and Model X, over the past few weeks. The Model X, the company’s original SUV, is officially gone.

Tesla has officially closed the book on its most exclusive send-off for the Model X. The limited-run Model X Signature Edition—priced at $159,420 before fees and limited to just 100 units—is now sold out, with reservations closed as of April 16.

The Signature Edition was no ordinary Model X Plaid. Offered exclusively by invitation to select existing Tesla owners, it represented the final production batch of the current-generation Model X before manufacturing at Fremont ends.

Every unit featured an exclusive Garnet Red exterior paint, unique badging, and a standard six-seat configuration. With full Plaid powertrain specs—Tri-Motor All-Wheel Drive, over 1,000 horsepower, and blistering acceleration—it was positioned as a collector’s item for loyalists who wanted one last shot at owning a piece of Tesla history.

The timing is no coincidence.

Tesla announced earlier this year that it would discontinue regular production of both the Model S and Model X to repurpose the Fremont factory’s dedicated lines for mass production of its Optimus humanoid robots.

Elon Musk has repeatedly emphasized that Optimus could ultimately become more valuable to the company than its vehicle business, with ambitions to build hundreds of thousands of units annually.

The Signature Editions served as a final “runout” series: 250 for the Model S and only 100 for the Model X, all built to the highest Plaid specification before the line is converted.

Deliveries of the remaining Signature units are scheduled to begin in May 2026. For buyers who secured one, it’s the ultimate swan song for a vehicle that helped define Tesla’s early luxury EV dominance.

Launched in 2015, the Model X introduced falcon-wing doors, a panoramic windshield, and class-leading performance that turned heads and set benchmarks. While newer models like the Cybertruck and refreshed Model Y have taken center stage, the Model X Plaid remained a halo product for those seeking maximum range, space, and speed in an SUV package.

With inventory of standard Model X units already nearly exhausted across the U.S., the rapid sell-out of the Signature Edition underscores enduring demand for Tesla’s premium flagships even as the company pivots toward robotics and autonomy.

For enthusiasts, these 100 garnet-red SUVs will likely become instant collector’s items—tangible reminders of the vehicles that built the brand before Tesla’s next chapter fully begins. The last chance is gone, but the legacy endures.

Continue Reading

Elon Musk

Tesla Optimus V3 hand and arm details revealed in new patents

Two new patents, which were coincidentally filed on the same day as the “We, Robot” event back in October 2024, protect Tesla’s mechanically actuated, tendon-driven architecture.

Published

on

Credit: Tesla China

Tesla is planning to soon reveal its latest and greatest version of the Optimus humanoid robot, and a series of new patents for the hands and arms, with the former being, admittedly, one of the most challenging parts of developing the project.

Two new patents, which were coincidentally filed on the same day as the “We, Robot” event back in October 2024, protect Tesla’s mechanically actuated, tendon-driven architecture.

The designs relocate heavy actuators to the forearm, route cables through a sophisticated wrist design, and employ innovative joint assemblies to achieve human-like dexterity while enabling lightweight construction and high-volume manufacturing.

Core Tendon-Driven Hand Architecture

The primary patent, which is titled “Mechanically Actuated Robotic Hand,” details a cable/tendon-driven system.

Actuators are positioned in the forearm rather than the hand. Each finger features four degrees of freedom (DoF), while the wrist adds two more.

Three thin, flexible control cables (tendons) per finger extend from the forearm actuators, pass through the wrist, and connect to the finger segments. Integrated channels within the finger phalanges guide these cables selectively—routing behind some joints and forward of others—to enable independent bending without unintended motion.

Patent diagrams illustrate thick cable bundles emerging from the wrist into the palm and fingers, with labeled pivots and routing guides. This setup closely mirrors human forearm-muscle and tendon anatomy, where most hand control originates proximally.

Advanced Wrist Routing Innovation

One of the standout features is the wrist’s cable transition mechanism. Cables shift from a lateral stack on the forearm side to a vertical stack on the hand side through a specialized transition zone.

This geometry significantly reduces cable stretch, torque, friction, and crosstalk during combined yaw and pitch wrist movements — common failure points in simpler tendon systems that cause imprecise or jerky motion.

By minimizing these issues, the design supports smoother, more reliable multi-axis wrist operation, essential for complex real-world tasks.

Companion Patents on Appendage and Joint Design

Two supporting patents provide additional depth. “Robotic Appendage” covers the overall forearm-to-palm-to-finger assembly, with a palm body movably coupled to the forearm and finger phalanges linked by tensile cables returning to forearm actuators. Tensioning these cables repositions the phalanges precisely.

“Joint Assembly for Robotic Appendage” describes curved contact surfaces on mating structures paired with a composite flexible member. This allows smooth pivoting while maintaining consistent tension, enhancing durability, and simplifying assembly for mass production.

Executive Insights on Hand Development Challenges

Tesla executives have consistently described the hand as the most difficult component of Optimus.

Elon Musk has called it “the majority of the engineering difficulty of the entire robot,” emphasizing that human hands possess roughly 27–28 DoF with an intricate tendon network powered largely by forearm muscles. He has likened the challenge to something “harder than Cybertruck or Model X… somewhere between Model X and Starship.”

Elon Musk shares ridiculous fact about Optimus’ hand demos

In mid-2025, Musk acknowledged that Tesla was “struggling” to finalize the hand and forearm design. By early 2026, he stated that the company had overcome the “hardest” problems, including human-level manual dexterity, real-world AI integration, and volume production scalability.

He estimated the electromechanical hand represents about 60 percent of the overall Optimus challenge, compounded by the lack of an existing supply chain for such precision components.

These patents directly tackle the acknowledged pain points: relocating actuators reduces hand mass and inertia for better speed and efficiency; advanced wrist routing and joint geometry address friction and crosstalk; and simplified, stackable parts visible in the diagrams indicate readiness for high-volume manufacturing.

Implications for Optimus Production and Leadership

Collectively, the patents portray the Optimus v3 hand not as a mere prototype, but as a production-oriented system engineered from first principles.

The 22-DoF architecture, forearm-driven tendons, and crosstalk-minimizing wrist deliver a clear competitive edge in dexterity. They align with Musk’s view that high-volume manufacturing is one of the three critical elements missing from most other humanoid projects.

For Optimus to become the most capable humanoid robot, its hand needed to replicate the useful and applicable design of the human counterpart.

These filings demonstrate that Tesla has transformed years of engineering challenges into patented, elegant solutions — positioning the company strongly in the race toward general-purpose robotics.

Continue Reading

News

Tesla intertwines FSD with in-house Insurance for attractive incentive

Every mile logged under FSD now carries a documented financial value—lower risk, lower cost—based on Tesla’s internal driving data rather than external crash statistics alone.

Published

on

tesla interior operating on full self driving
Credit: TESLARATI

Tesla intertwined its Full Self-Driving (Supervised) suite with its in-house Insurance initiative in an effort to offer an attractive incentive to drivers.

Tesla announced that its new Safety Score 3.0 will automatically have a perfect score of 100 with every mile driven with Full Self-Driving (Supervised) enabled.

The change is designed to boost customers’ average safety scores and deliver noticeably lower monthly premiums.

The move marks the clearest link yet between Tesla’s autonomous driving technology and its proprietary insurance product. Tesla Insurance already relies on real-time vehicle data—such as acceleration, braking, following distance, and speed—to calculate a Safety Score between 0 and 100. Higher scores have long translated into cheaper rates.

Under the previous system, however, even brief manual interventions could drag down the average, frustrating owners who rely heavily on FSD. Version 3.0 eliminates that penalty for supervised autonomous miles, effectively treating FSD-driven segments as the safest possible driving behavior.

The incentive is immediate and financial. Drivers who keep FSD engaged for the majority of their trips will see their overall score rise, potentially shaving hundreds of dollars off annual premiums.

Tesla framed the update as a direct response to customer feedback, many of whom had complained that the old scoring model punished the very behavior it was meant to encourage.

For now, the program applies only to new policies in six states: Indiana, Tennessee, Texas, Arizona, Virginia, and Illinois.

Existing policyholders are not yet included, a point that drew swift questions from the Tesla community. Many owners in other states, including California and Georgia, expressed hope that the benefit would expand nationwide soon.

The announcement arrives as Tesla continues to roll out FSD Supervised updates and push for regulatory approval of more advanced autonomy. By tying insurance savings directly to FSD usage, the company is putting its own actuarial weight behind the technology’s safety claims.

Every mile logged under FSD now carries a documented financial value—lower risk, lower cost—based on Tesla’s internal driving data rather than external crash statistics alone.

Tesla has not disclosed exact premium reductions or the full rollout timeline beyond the six launch states.

Still, the message is clear: the more drivers trust FSD Supervised, the more Tesla Insurance will reward them. In an era when legacy insurers remain cautious about autonomous tech, Tesla is betting that its own data will prove the safest miles are the ones driven hands-free.

Continue Reading