Connect with us

News

Tesla China sees 10.9k registrations amidst Labor Day holiday

Credit: Tesla Asia/X

Published

on

Tesla China saw 10,900 insurance registrations in the week of April 29 to May 5, 2024. The results represent a 26% decline from the previous week’s 14,860 registrations, but it is nevertheless impressive considering the presence of a national holiday during the first days of May. 

Tesla’s registrations in China over the past month were quite interesting. During the week ending April 7, Tesla China only saw 1,900 registrations. In the week ending April 14, the company’s registrations rose to 6,230 units, and in the week ending April 21, registrations dropped to 5,160.

Tesla China’s best numbers during the month happened in the week ending April 28, when the company saw 14,860 registrations. 

As noted in a CNEV Post report, major electric vehicle makers in China saw a decline in registrations last week. The decline, however, could largely be attributed to China’s Labor Day holiday this year, which spanned May 1-5, 2024. The publication also noted that the beginning of a month typically sees a slowdown in vehicle deliveries in China. 

With this in mind, it would appear that Tesla China’s performance in the week ending May 5 is largely representative of the company’s registrations from April 29-30, 2024. Considering that May 1-5 is a national holiday, it would not be surprising if Tesla China’s registrations slowed significantly during the period. 

Tesla China does not report its weekly sales figures, but a general idea of the company’s overall performance in the domestic market could be inferred through the number of new vehicle registrations that are filed every week. Fortunately, China’s new vehicle registrations are tracked and reported by industry insiders and companies like Deutsche Bank and Li Auto.

Advertisement
-

Interest in Tesla’s vehicles in China may be seeing a rise as of late, likely due to expectations surrounding the rollout of Full Self-Driving (FSD) to the country. Expectations of FSD’s rollout in China came after Elon Musk’s recent unannounced visit, as well as Tesla’s partnership with Baidu for mapping and navigation data. Tesla’s partnership with Baidu is expected to help Tesla overcome hurdles for the release of FSD into the country. 

Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

Elon Musk

Sean Duffy fires back at Elon Musk over free Starlink

Sean Duffy says the FAA picked a ground network over Starlink, and Musk isn’t impressed.

Published

on

By

Elon Musk and U.S. Transportation Secretary Sean Duffy during Duffy’s visit to Gigafactory Texas in May 2025. (Credit: Elon Musk/X)
Elon Musk and U.S. Transportation Secretary Sean Duffy during Duffy’s visit to Gigafactory Texas in May 2025. (Credit: Elon Musk/X)

Transportation Secretary Sean Duffy has responded to Elon Musk’s claim that the Federal Aviation Administration turned down free Starlink terminals before last week’s nationwide ground stop, saying the department chose a ground-based network after running into problems with an earlier version of the satellite service. Musk’s reply was a single emoji: “🤦‍♂️.”

Speaking at a press conference, Duffy said Starlink had been useful in some parts of the system. “I’ve worked well with Elon, and he, Starlink was a great solution for some of our assets in Alaska, but we sent Starlink, in one of its prior iterations, to our tech lab, and, there was some issues that we had to navigate, and we thought that the best method is to have a network that’s based on the ground,” Duffy said, according to a transcript published by ZeroHedge. “Now, I think what he’s doing with Starlink and the speed is remarkable, but, our airspace is very big. We have assets everywhere. And so, again, we used him for different parts of the airspace.”

Duffy did not dispute that the offer was made. He also did not say what problems the FAA found during testing.

The exchange started Monday, when Musk wrote on X, “Free Starlinks for FAA were offered to Sec Duffy, but he said they were not needed. As it turns out, they were,” as Teslarati reported. That post came three days after the FAA grounded departures nationwide on November 13, when its legacy equipment became unstable as data flooded its telecommunications network at 1,000 connection attempts every four to five seconds. The FAA traced the flood to a radar site in Amarillo, Texas, and a radio site in El Dorado, Arkansas, where L3Harris had been installing a new router. Roughly 12,462 flights were canceled that day.

Duffy has also signaled frustration with L3Harris, which runs the FAA’s current network. “I want to get away from L3Harris and get to a new one, but they own the network,” he said. “I can’t cancel the network that they own.” He has asked Congress for $50 billion to modernize air traffic control, arguing against “a patchwork, a fix to a system that’s critical for every single family.”

The FAA’s position on satellite links predates this week. In a July 2025 letter to lawmakers, FAA Administrator Bryan Bedford said the agency “would not use Starlink (or any satellite service) as the sole communications technology” for safety-critical air traffic services. Reuters reported at the time that the FAA was not considering replacing its L3Harris and Verizon contracts with Starlink. Verizon’s FAA Enterprise Network Services contract, awarded in 2023, is valued at up to $2.4 billion over 15 years.

Musk first pressed the issue in February 2025, while he was leading the Department of Government Efficiency, writing that “the Verizon system is not working and so is putting air travelers at serious risk” before correcting himself days later to blame L3Harris. SpaceX said at the time it was supplying Starlink kits to the FAA at no cost and had no intent to take over any existing contract.

Continue Reading

Elon Musk

Tesla gears up Cybercab with Starlink for public debut, but with notable changes

Published

on

Credit: Joe Tegtmeyer | X

Tesla is gearing up Cybercab, its all-electric and fully autonomous ride-hailing vehicle, for a very public debut as it plans to start customer deliveries in December. However, the units that rolled out of Gigafactory Texas this morning seem to differ from what we have seen previously.

Aerial images captured by drone photographer Joe Tegtmeyer at Giga Texas on November 18 reveal a noticeable update to the appearance of Tesla’s Cybercabs equipped with Starlink. Rows of gold production vehicles sit in the outbound lot, each carrying a flush-mounted Starlink V5 terminal on the rear hatch that looks more refined than the version first shown months earlier.

When Tesla first unveiled the integration in July and displayed a physical example in August, the Starlink hardware appeared as a relatively distinct rectangular panel on the hatch. Later September footage of large numbers of Cybercabs leaving the factory still showed a lighter, more obvious rectangular cover that roughly matched the vehicle’s gold paint:

Images via Joe Tegtmeyer

The newest batch stands out for how cleanly the cover blends into the roof’s character lines. Observers and replies to Tegtmeyer’s post describe the result as tighter and more intentional, sitting flush and following the body contours rather than reading as an added panel.

All of the Cybercabs in the latest images also wear prominent “Cybercab” logos on the doors and rear hatch, confirming these are finished production units rather than early prototypes. They are staged near the factory building, end-of-line areas, and covered transport trailers, with some already lined up for shipment.

The scale and consistency of the installation point to factory tooling rather than retrofit work.

A secondary detail noted in related sightings is a darker tone to the Starlink cover compared with earlier lighter panels. Tegtmeyer himself left open whether the darker finish is deliberate. There are a variety of explanations for it: perhaps for thermal performance, signal characteristics, or simple visual identification—or simply a batch variation still being refined.

Either way, the overall effect is a more integrated, production-ready appearance. For a Robotaxi that relies on Starlink for fleet connectivity, passenger services, and backup data links in areas with weak cellular coverage, the cleaner hatch design is more than cosmetic.

It signals that Tesla is polishing the final visual and hardware details as Cybercab volumes continue to climb at Giga Texas ahead of broader Robotaxi deployment. The vehicles now look to be built with Starlink instead of it being added afterward.

Continue Reading

Elon Musk

Tesla’s Powercore could change how data centers get power

Tesla unveiled Powercore, a solid-state transformer that could ease one of the grid’s worst bottlenecks.

Published

on

By

Tesla has unveiled Powercore, a solid-state medium voltage transformer that also handles the jobs of an inverter and a circuit breaker in a single unit. “Solid state medium voltage transformer, inverter and breaker – reliable, safe and secure,” the company’s Tesla Megapack account posted on X Tuesday, adding that the product is “Made in America” and will be “Operating 2027.” Elon Musk followed with his own post: “Advanced solid state transformers at scale from Tesla.”

Tesla rates Powercore at 7.4 MW, or 9 MVA, of continuous output at 34.5 kV AC, with grid-forming support for 10 MVA of peak power. Specs shared by Sawyer Merritt list a peak efficiency of 98.86 percent, a DC range of 800 to 2,000 volts and a built-in solid-state breaker that clears faults in about 100 microseconds. Tesla has not announced pricing, a factory location or a first customer.

The product fills a gap Tesla left open last year. When it introduced Megapack 3 and Megablock in September 2025, Tesla said it would build its own transformers, but shared almost nothing about them. Megablock groups four Megapack 3 units with a transformer and switchgear into a single medium voltage block, as Teslarati reported. Powercore appears to be that missing piece.

A typical battery or solar project today uses low voltage inverters to turn DC into AC, then a large oil-filled transformer to step that power up to grid voltage. A solid-state unit handles both steps with power electronics, which means less equipment, a smaller footprint and no flammable oil. Grid-forming capability lets it actively help hold voltage and frequency steady rather than simply following the grid.

Advertisement
-

Timing is a big part of the pitch. Lead times for conventional transformers have stretched into years as AI data centers and renewable projects crowd utility interconnection queues. Tesla energy executive Max de Zegher pointed to the problem in a post Musk shared, noting that “transformers have barely changed since the 1890s: copper coils in a tank of oil,” while batteries, solar and compute all run on DC. Powercore, he wrote, delivers “one conversion and about half the losses.” Tesla has also said its Megapack supply for 2027 is nearly sold out.

Tesla deployed 13.7 GWh of energy storage in the third quarter, its second best quarter on record. On Tuesday, the company also said customer solar systems deployed by Tesla Energy now generate more than twice the electricity its global operations consume each year.

Continue Reading