News
Tesla reportedly targeting 1k Model Y per week by end of April in Gigafactory Berlin
Tesla may be taking a rather deliberate strategy with its vehicle production ramp in Germany. As per local reports, Tesla is currently looking to produce about 1,000 electric vehicles per week at Giga Berlin by the end of the month, with the company ramping to about 5,000 to 10,000 per week by the end of 2022.
Giga Berlin only started vehicle deliveries during an event attended by CEO Elon Musk last month. Tesla handed over its first batch of Model Ys during the ceremony, but reports among avid watchers of the facility have hinted that Giga Berlin is still ramping its vehicle production slowly.
Citing internal calculations by the company, German media outlet Automobilwoche estimated that Tesla will only be making about 30,000 cars at Giga Berlin this year, with higher outputs being achieved in 2023. This is surprisingly conservative, especially considering Tesla’s pace in Gigafactory Shanghai. That being said, the German media outlet also noted that Tesla plans to ramp its weekly output to 1,000 vehicles per week by the end of the month.
This would be quite an improvement considering that Tesla is reportedly only producing about 350 vehicles per week at Gigafactory Berlin for now. By the end of the year, Tesla will reportedly be looking to improve its output to about 5,000-10,000 vehicles per week. Production would be paused for about three weeks in Fall 2022, however, as Tesla would reportedly be transitioning the Made-in-Germany Model Y from one battery cell format to another.
Considering that Tesla is currently using 2170 cells for the Model Y that are produced in Giga Berlin and the Fremont Factory, it seems safe to assume that the Fall 2022 shutdown in the facility would allow the company to transition its European-made all-electric crossovers with 4680 cells. So far, only Tesla’s Made-in-Texas Model Ys are believed to be equipped with the company’s new battery form factor.
Tesla is currently building a dedicated battery cell production facility in the Gigafactory Berlin complex. Progress in the factory’s construction has been relatively fast, and expectations are high that the battery plant will be operational in the near future. Estimates that Tesla could transition its Made-in-Germany Model Y to 4680 cells could then be proven accurate.
Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.
News
Tesla plans ingenious improvement to one of its best features
Tesla is planning to improve one of the best features on its lineup of cars, a new patent shows. Tesla’s massive glass roof on its premium models is among the coolest additions to the all-electric vehicles, but the design certainly has its complaints, especially from those who live in even slightly warm climates.
Tesla has published a new patent that promises to transform cabin comfort in its electric vehicles, particularly those equipped with the expansive glass roofs.
The document, identified as US20260091643A1 and titled “Airflow Optimization for Cabin Comfort“, addresses that common complaint. Sunlight streaming through windshields and panoramic roofs creates localized hot air pockets near the dashboard and headliner. These pockets generate significant temperature gradients that conventional heating, ventilation, and air conditioning systems struggle to manage evenly.
The exposure to direct sunlight can make the cabin extremely warm, and even after cooling down the interior temperature, combating the continuous stream of sunlight and heat is a challenge. It uses precious energy that is especially pertinent to range and efficiency.
The patent explains how standard dashboard vents push cool air upward, only to entrain warmer air from these stagnant zones and distribute it throughout the occupied cabin space. This process forces the blower to operate at higher speeds, increasing energy consumption and reducing overall efficiency.
In electric vehicles, where every watt impacts driving range, such inefficiencies prove costly.
🚨 THE MODEL Y L IS THE MOST WATCHED EV LAUNCH OF 2026. ITS GLASS ROOF HAS ONE WEAKNESS — AND A PATENT PUBLISHED THIS WEEK SHOWS @TESLA BUILT THE FIX
The Model Y L launched in China and is now arriving in Korea, Japan, and across Asia-Pacific. It also has a glass roof. So does… https://t.co/wr6XnBn1Oc pic.twitter.com/5sYpniXJbU
— SETI Park (@seti_park) April 5, 2026
Research from AAA indicates that air conditioning can diminish range by up to 17 percent under hot conditions. Tesla’s innovation shifts the approach by extracting heat at its source rather than attempting to dilute it after mixing occurs.
Engineers describe a suction HVAC unit connected to dedicated intakes positioned strategically on the upper dashboard surface and within the headliner.
These intakes link to a hot air pocket extraction duct that channels the warmest air directly into the system’s plenum for conditioning. As the blower activates, it simultaneously draws recirculated cabin air and targeted hot pocket air through filters and cooling coils before redistributing conditioned airflow.
It seems somewhat reminiscent of the Tesla heat pump, which aims to combat colder temperatures.
Tesla highlights Model Y’s heat pump innovations in new promotional video
This method reduces entrainment, lowers peak temperatures, and achieves more uniform comfort levels. Testing data reveals that facial temperature gradients drop from 21 degrees Celsius, or 69.8 degrees Fahrenheit, in conventional setups to just 12 degrees Celsius (53.6 degrees F) with the new system. Blower speeds and compressor power requirements decrease appreciably as a result.
The design incorporates smart controls that monitor sunlight intensity and internal temperature distributions in real time. Suction activates selectively only where needed, optimizing energy use without constant high demand. Furthermore, the extraction duct serves a dual purpose.
In the summer months, it pulls hot air inward for cooling; in winter, it reverses to direct warm air outward for rapid windshield defrosting. This versatility allows the reuse of existing hardware with minimal modifications, potentially enabling retrofits in current Tesla fleets.
Lifestyle
Tesla saves its passengers again – This time after a 300-foot cliff fall in Malibu
A Tesla Model 3 fell 300 feet off a Malibu cliff and both passengers survived.
A Tesla Model 3 plunged roughly 300 feet off a cliff on Mulholland Highway in Malibu on Friday morning, May 29, 2026, and both occupants survived. The crash was reported at approximately 7:30 a.m. near the 2500 block of Mulholland Highway, triggering a multi-agency rescue operation involving Malibu Search and Rescue, the Los Angeles County Fire Department, the California Highway Patrol, and McCormick Ambulance.
When first responders arrived, the male driver was outside the vehicle shouting for help while the female passenger remained pinned inside the Tesla. Rescue crews rappelled down the cliffside on ropes to reach the wreckage. A flight medic was lowered by helicopter to begin treating both victims, and the driver was hoisted up to the roadway before crews used the Jaws of Life to free the trapped passenger. Both were airlifted to a local trauma center with moderate injuries despite a remarkable result for a fall that steep.
The outcome is not surprising, considering Model 3 earned an overall 5-star rating from NHTSA in every category and sub-category, and recorded the lowest probability of injury of any car ever evaluated by the U.S. New Car Assessment Program. The absence of a traditional engine in the front of the vehicle creates a longer crumple zone that absorbs impact energy before it reaches occupants, and the battery pack running along the floor gives the car an unusually low center of gravity that reinforces structural rigidity.
This is not the first time a Tesla has kept passengers alive after going off a cliff. A Tesla Model Y carrying a family of four survived a plunge off a cliff at Devil’s Slide near San Francisco in January 2023, with two adults and two children walking away from a 250-foot fall. That incident drew widespread attention to how the structural integrity of Tesla’s electric platform performs in extreme crash scenarios that most vehicles would not survive.
Tesla Model Y driver who drove off cliff with family attempts to avoid criminal conviction
News
Tesla Full Self-Driving expansion in Europe continues with new addition
Tesla Full Self-Driving (Supervised) has taken yet another significant step forward in Europe. On May 29, Estonia became the third European Union country to approve the advanced driver-assistance technology, following approvals in the Netherlands and Lithuania.
Tesla Europe announced the news on X, confirming the expansion has continued across the continent that, at one time, seemed to be taking its sweet old time giving any approval to the FSD suite.
FSD Supervised now approved in Estonia🇪🇪. Rollout will begin soon pic.twitter.com/y5a64qlp5m
— Tesla Europe, Middle East & Africa (@teslaeurope) May 29, 2026
Estonia’s Transport Administration (Transpordiamet) granted the approval by recognizing the type certification issued by the Dutch vehicle authority RDW. This mutual recognition mechanism, enabled by EU regulations, allows other member states to fast-track deployment without repeating extensive local testing.
The Estonian authority noted that Tesla’s FSD had undergone rigorous evaluation on European roads for approximately 18 months before the initial Dutch approval in April 2026.
FSD Supervised remains classified as a Level 2 advanced driver-assistance system (ADAS). Drivers must maintain full attention, keep their hands on the wheel, and stay ready to intervene at any moment.
The system assists with tasks such as automatic lane changes, navigation through city streets, and responding to traffic objects, but it does not constitute full autonomy. Estonian officials emphasized this distinction, underscoring that safety responsibility lies entirely with the driver.
The rapid progression across the Baltic region highlights Tesla’s strategic approach to European expansion. The Netherlands provided the foundational type approval in April, unlocking doors for neighboring countries.
Lithuania followed swiftly in mid-May, with rollout beginning shortly thereafter. Estonia’s decision, coming just days later, demonstrates how smaller, digitally progressive nations are accelerating adoption.
Tesla owners in Estonia can expect an over-the-air software update in the coming weeks, bringing the latest FSD capabilities to compatible vehicles
This expansion builds on Tesla’s global momentum. FSD Supervised is now available in 11 countries worldwide, including the United States, Canada, Australia, and South Korea. In Europe, the approvals signal growing regulatory confidence in Tesla’s vision-based AI approach, which relies on cameras and neural networks rather than lidar or radar-heavy alternatives used by some competitors.
For Tesla, these European milestones are more than symbolic. They validate years of data collection and software iteration while opening new revenue streams through FSD subscriptions and purchases.
As the company continues refining its AI models with real-world miles from diverse driving environments, including Estonia’s variable winter conditions, the dataset grows richer, potentially benefiting global users.