Connect with us

News

Tesla pushes Made-in-Germany Model Y test drives in Switzerland

Credit: Marina Sarah Elena Bopp/LinkedIn

Published

on

Potential customers in Switzerland who wish to try out a German-made Tesla Model Y now have the opportunity to take one of the European-made all-electric crossovers for a spin. As per a recent post on LinkedIn, Tesla is offering test drives for its Germany-made Model Y in Cham, Zug, Switzerland. 

Several Tesla employees from the area confirmed the program, with Store Supervisor Marina Sarah Elena Bopp noting that the location has received its first white Made-in-Germany Model Y Performance from Giga Berlin. The unit, which is equipped with 21″ Überturbine wheels and an all-black interior, will be used as a test drive unit. Previously available units featured a black color scheme, similar to the first Model Ys delivered in last month’s handover ceremony with CEO Elon Musk.

Credit: Marina Sarah Elena Bopp/LinkedIn

Needless to say, customers of Tesla’s Cham, Zug location in Switzerland could consider themselves fortunate. Germany-made Model Ys are quite in demand even among Tesla enthusiasts today, after all, as they are produced in one of the electric vehicle maker’s newest factories. Being a Made-in-Germany Tesla, expectations are also high that the Model Ys from Giga Berlin would feature good build quality

Veteran electric car owners would note that test drives are among the most effective ways to promote Teslas. The Tesla Model Y, while a crossover, is quite unlike any other vehicle in its class thanks to its combination of raw power and breathtaking tech. Having potential customers experience it firsthand would likely be the ideal way to market the vehicle. 

Gigafactory Berlin has only been open for a few weeks now, but the facility has experienced its first environmental challenge this week. As per local reports, a water-polluting liquid had leaked in Giga Berlin’s paint shop earlier this week. The substance escaped on Monday evening because a valve had not been completely closed. Fortunately, spokesman Thomas Frey has confirmed that the substance was fully caught and gathered in a collection tank, and later pumped out by an approved waste disposal company. Tesla also reported the incident to the water authority of the Oder-Spree district.  

Tesla’s actions, however, caught the ire of the Strausberg-Erkner water association, who noted that they were not included in the company’s reports about the incident. “We are surprised that we did not know this and were not included in the reporting column. These substances flow, but the information does not flow. We need this information to ensure the safety of the drinking water service in the event of an accident and to be able to assess pollutant inputs in the sewage system,” a spokesperson from the association said. 

Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.

Advertisement
-

Simon is an experienced automotive reporter with a passion for electric cars and clean energy. Fascinated by the world envisioned by Elon Musk, he hopes to make it to Mars (at least as a tourist) someday. For stories or tips--or even to just say a simple hello--send a message to his email, simon@teslarati.com or his handle on X, @ResidentSponge.

Advertisement
Comments

News

SpaceX achieves incredible milestone with Starlink program

Published

on

Credit: SpaceX

SpaceX has achieved an incredible milestone by launching its 11,000th Starlink satellite into orbit.

This accomplishment occurred during the Starlink Group 17-50 mission, which lifted off on August 19 at 04:01 UTC from Space Launch Complex 4 East at Vandenberg Space Force Base in California.

A Falcon 9 rocket carried 24 Starlink V2 Mini satellites on this flight, successfully deploying them into low Earth orbit approximately one hour after liftoff. The first stage booster, identified as B1097 on its twelfth flight, landed successfully on the droneship Of Course I Still Love You in the Pacific Ocean.

According to tracking data compiled around that date, this deployment brought the total number of Starlink satellites in orbit to just over 11,000.

The Starlink program began with test satellites known as Tintin A and B, launched on February 22, 2018. The first operational batch of 60 Starlink satellites followed on May 24, 2019, when a Falcon 9 rocket lifted off from Cape Canaveral. Those initial satellites marked the start of a rapid expansion that has continued for more than seven years.

SpaceX has conducted hundreds of dedicated Starlink missions since then, routinely launching batches of 20 to 30 satellites at a time using reusable Falcon 9 rockets. By mid-2026, the company had already surpassed 12,000 total satellites launched across all versions, with continuous replacements for units that deorbit as designed to manage space debris.

Looking ahead, SpaceX continues to expand the Starlink constellation to enhance global broadband coverage, capacity, and speed. The network already serves millions of users across more than 160 countries and supports applications ranging from residential internet to maritime, aviation, and emergency services.

Future plans center on next-generation hardware, including larger V3 satellites capable of delivering substantially higher throughput, which require the increased payload capacity of the Starship vehicle currently under development and testing.

In July, SpaceX submitted an application to the Federal Communications Commission seeking authority for a Gen3 constellation of up to 100,000 satellites. These spacecraft would operate in very low Earth orbit shells at altitudes near 325 kilometers and 475 kilometers. The filing requests use of existing Ku, Ka, V, and E band spectrum along with new greenfield W and D band frequencies between 92 and 275 GHz.

SpaceX states that the expanded system aims to deliver multi-gigabit symmetrical broadband to consumers, enterprises, governments, and billions of AI-powered devices worldwide while handling a majority of global internet traffic. Approval and subsequent deployment would depend on regulatory review and the operational readiness of Starship for high-volume launches.

This ambitious scale reflects SpaceX’s ongoing commitment to providing ubiquitous high-speed connectivity from space.

Continue Reading

News

Tesla is opening Cybercab rides to a select few

Published

on

Credit: Tesla

Tesla has opened a new sweepstakes to allow the public to be among the first to take an initial ride in a Cybercab. This all-electric, steering-wheel-less, pedal-less vehicle is the centerpiece of the company’s autonomous ride-hailing platform, Robotaxi.

There are two ways Tesla fans can get to Austin to take part in the first public rides of the Cybercab: by riding on the Robotaxi platform by August 23, or by mailing a very specific entry to their Headquarters at Gigafactory Texas.

Tesla announced the latter portion of the sweepstakes last night:

Tesla will give one entry into the sweepstakes if you mail a 3″ by 5″ piece of paper with your full name, mailing address, telephone number, email address, and date of birth to their address:

Tesla, Robotaxi Sweeps Event

1 Tesla Road,

Austin, TX 78725

There is a limit of one entry per stamped envelope. You can send as many as you’d like, but they must be in separate envelopes.

The company’s unique strategy to give people the opportunity to ride in a Cybercab before pretty much anyone else outside of the company is a hilarious but spot-on representation of how Tesla operates. In classic fashion, they had the perfect response to the event:

Cybercab will launch later this month, it appears, especially as it plans to announce the winners of the sweepstakes on August 25. The car has already been operating internally, as employees have been able to utilize the Cybercab for rides in some capacity, something it announced earlier this month.

Tesla weirdly confirms Cybercab employee rides, a huge milestone

Moving forward, the big goal is to get Cybercab out on the roads and integrated into the public Robotaxi fleet, one that will pick up real-world ride-hailers and give them a ride from Point A to Point B.

No matter which way you cut it, it appears Tesla is close to putting a vehicle with no steering wheel and no pedals on the road to help people travel autonomously.

You can ride along with us in our first Cybercab ride from the We, Robot event in October 2024. The video is embedded below:


Continue Reading

News

Tesla reveals plans for Robotaxi charging hub in Austin

Published

on

Credit: Grok Imagine

Tesla has revealed plans through permit submissions for a massive Robotaxi charging hub in Austin, Texas.

Tesla plans to build the Supercharger hub in multiple phases, with the second phase potentially introducing wireless induction charging, something the company has been developing for the Robotaxi fleet.

Initially, 48 Tesla Robotaxi-geared Superchargers will be built on a lot just across from the St. Elmo, Texas, Service Center. There are about 80 additional spots that will not be impacted by phase 1 of the construction process.

Filings show that the second phase of the project will turn those 80 additional spots into wireless charging for Robotaxi, but it might be an error. The Key Notes state that item 3 is listed as “V4 Charging Cabinet to Support 80 Wireless Chargers in Phase 2. However, the drawings point to V3 Cabinets that are already tied to Superchargers:

There are roughly 128 total spots in the lot, but it is unclear if they will all be used for charging based on what appears to be some sort of typo in the blueprint.

This is among the first Robotaxi charging hubs Tesla has started to develop, as it currently has four others planned throughout various areas: one in Phoenix, one in San Antonio, another in Irving, which will serve the Dallas-Fort Worth area, and another in Las Vegas.

These projects are necessary as Tesla expands its Robotaxi program. Now that preparations have started for the public launch of Cybercab, Robotaxi will likely be expanding aggressively, especially over the next two to three years.

Last night, The Information reported that Tesla was planning to launch Cybercab as soon as the end of August. Hours later, Tesla then announced it was launching a competition for fans to potentially ride in Cybercab during its first public rides.

Tesla Cybercab launch preparations have begun

Tesla’s plan to expand its charging infrastructure in the regions where Robotaxi will initially operate is great preparation for the expanding service. There is still a lot to do, including launching the Cybercab on time.

Continue Reading