Tesla’s head of AI, Ashok Elluswamy, noted on Sunday that the newest FSD v14 Lite build rolling out to Hardware 3 cars is likely the version that goes to wide release, the strongest signal yet that Tesla is near to closing out an early access phase that Hardware 3 owners have waited more than a year for.

Elluswamy made the comment in response to an extensive review from Tesla owner Zack, known on X as @BLKMDL3, who tested software version 2026.20.6.10 and detailed the changes in a lengthy post. “FSD v14 Lite (for Tesla AI3 hardware vehicles) review.

The update restarts a rollout that had stalled after its initial release. Tesla began pushing FSD v14 Lite to Hardware 3 early access drivers on June 29, bringing driving behavior learned on the newer Hardware 4 computer down to the more limited chip that has powered Tesla vehicles built between 2019 and early 2023. That release, as we covered in detail, gave roughly 4 million HW3 vehicles their first meaningful update since being frozen on version 12.6 in early 2025.

Tesla Full Self-Driving v14 ‘Lite’ Release Notes: new capabilities and features

The latest build adds features that bring Hardware 3 closer in line with what Hardware 4 owners already have. FSD can now start directly from park without a brake pedal confirmation, a change Zack called a small but meaningful quality of life improvement. The interface also picks up the blue “P” park icon, approaching destination alerts, and a dedicated Self-Driving app with streak tracking, all details previously exclusive to the AI4 branch of v14, as outlined in Tesla’s original release notes.

The stakes around Hardware 3 go beyond software polish. Tesla sold the Full Self-Driving package for years on the promise that every vehicle equipped with it had the hardware needed to eventually drive itself without supervision. That promise broke down during Tesla’s Q1 2026 earnings call, when Musk acknowledged HW3 cars could not run unsupervised FSD, prompting Tesla to offer trade-in discounts and hardware retrofits alongside the Lite software track.

Tesla confirmed HW3 can’t do Unsupervised FSD but there’s more to the story

Tesla has continued to frame v14 Lite as the primary path forward for the HW3 fleet, telling owners in April that international markets would follow the U.S. rollout once regulatory approvals came through. For now, HW3 owners in the early access group are the only ones running the new build. A broader rollout would mark the second major software delivery to the legacy fleet since Tesla first released FSD v14 to Hardware 4 vehicles, and the first sign since June that the Lite program is still moving rather than stuck in early access limbo.

Tesla had a petition protesting a recall to fix a potential issue with 2017-2023 Model Y and Model 3 vehicles’ headlights was denied, as the National Highway Traffic Safety Administration (NHTSA) disagreed with the company’s opinion of things.

The recall covers approximately 19,917 Model Y and Model 3 vehicles built from 2017 to 2023. Tesla initially submitted a noncompliance report for the headlights on these vehicles on March 15, 2024. Tesla then petitioned for an exemption from the fix, which violated FMVSS No. 108 (40 CFR 571.108), arguing that the “noncompliance is inconsequential as it relates to motor vehicle safety.

🚨 Tesla was denied a petition by the NHTSA to avoid a recall of 19,900 2017-2023 Model 3 and Model Y vehicles.

The NHTSA found that the vehicles’ headlights may exceed maximum lighting levels. Tesla argued it was inconsequential and did not require a recall. pic.twitter.com/m8Jmm1teLL

— TESLARATI (@Teslarati) July 16, 2026

The NHTSA disagreed, stating that Tesla’s conclusion that the headlights do not increase any risk was not an opinion it shared. The agency said it disagreed with Tesla’s assumption that glare is not increased to surrounding traffic. This issue could be highlighted even more in certain weather conditions.

Tesla will be required to remedy the issue, the NHTSA ruled:

“In consideration of the foregoing, NHTSA has decided that Tesla has not met its burden of persuasion that the subject FMVSS No. 108 noncompliance is inconsequential to motor vehicle safety. Accordingly, Tesla’s petition is hereby denied, and Tesla is consequently obligated to provide notification of and free remedy for that noncompliance under 49 U.S.C. 30118 and 30120.”

The issue here appears to be the angle of the headlights and the brightness they emit during operation. The NHTSA report states that:

“Tesla’s headlamp supplier, Marelli Automotive Lighting, tested 25 right-hand and 25 left-hand lamps, and for this sample, found the maximum photometric intensity measured in the 10°U to 90°U and 90°L to 90°R zone was between 136.2 cd and 230.1 cd for the right-hand lamps and between 117.5 cd and 160.3 cd for the left-hand lamps. According to Tesla, these tests revealed that the photometric intensity of the right-hand and left-hand headlamp lower beam on the subject vehicles may measure as much as 230.1 cd in the 10°U to 90°U and 90°L to 90°R zone, exceeding the maximum photometric intensity by 105.1 cd. Additionally, Tesla states that a left-hand lamp tested by a Transport Canada recognized laboratory measured a maximum of 171.27 cd in the 10°U to 90°U and 90°L to 90°R zone. Despite these measurements exceeding the allowed photometric maximum of 125 cd, Tesla believes that the subject noncompliance is inconsequential to motor vehicle safety.”

Tesla also argued at some points that the headlights had not been deemed responsible for any complaints, accidents, or injuries related to the noncompliance.

The National Transportation Safety Board released preliminary findings Wednesday confirming that a Tesla driver, not the vehicle’s software, caused a fatal crash in Katy, Texas in June. The driver, 44-year-old Michael Butler, had engaged Full Self-Driving Supervised mode on Rose Hollow Lane, a residential street with a 30 mph speed limit, before manually overriding the system by pressing the accelerator pedal all the way to 100%. Data recovered from the 2025 Tesla Model 3 showed the vehicle was traveling over 70 miles per hour when it struck a home and killed 76-year-old Martha Avila, who was inside. Weather was clear, the road was dry, and it was daylight.

Texas man charged in fatal Tesla crash where he blamed Autopilot

Butler told authorities he had passed out at the wheel. But security camera footage obtained by the NTSB told a different story, and showed the car accelerating through an intersection before leaving the road entirely. Police also found that Butler’s phone had Google searches including the terms “Tesla FSD not aggressive enough 2026” and “Tesla FSD too timid,” raising serious questions about how he was using the system before the crash. Butler has since been charged with manslaughter. The victim’s family has filed a lawsuit against both Butler and Tesla, alleging negligence.

The NTSB findings aligned directly with what Tesla VP of AI Software Ashok Elluswamy had already stated publicly on X in the weeks after the crash, writing that “the driver manually overrode self-driving by pressing the accelerator all the way to 100%.” The data confirmed his account.

Yup. In this case, the driver manually overrode self-driving by pressing the accelerator all the way to 100% of the accel pedal in this residential area. They reached a speed of 73 mph during the crash, and had the accelerator pressed even after the crash.

— Ashok Elluswamy (@aelluswamy) June 22, 2026