Connect with us

News

Tesla patent aims to make massive change to common automotive part

Detailed in US 2026/0110320 A1 and published on April 23, the patent re-engineers the humble trim clip—the small plastic fastener that secures interior panels to the vehicle’s body structure. Traditional clips are single-piece plastic parts designed for one-time installation.

Published

on

tesla roadster
Credit: Praveen Joseph/Twitter

A new Tesla patent aims to fix a common automotive item for a more peaceful ride, revolutionizing its design to remove vibrations and noise during normal operation.

Detailed in US 2026/0110320 A1 and published on April 23, the patent re-engineers the humble trim clip—the small plastic fastener that secures interior panels to the vehicle’s body structure. Traditional clips are single-piece plastic parts designed for one-time installation.

Over time, they loosen, rattle, and transmit road noise, suspension vibrations, and minor panel buzz directly into the passenger compartment. Tesla’s new design turns that ordinary item into a reusable, two-material vibration-damping system built for long-term silence.

The clip consists of four components drawn from just two material families. The pin and grommet are molded from rigid glass-fiber-reinforced nylon, giving them the strength needed to hold panels firmly in place.

Not a Tesla App reported on the patent.

A soft thermoplastic elastomer (TPE) is then overmolded onto the assembly in a distinctive mushroom shape that flares outward beyond the pin shaft. This soft layer does the heavy lifting for comfort: it spreads mechanical loads over a wider area and actively damps oscillations before they can reach the interior trim.

The result is a measurable reduction in noise, vibration, and harshness (NVH)—the very factors that separate a merely quiet electric vehicle from one that feels genuinely serene.

Engineers used finite-element analysis to dial in four precise forces that make the system both secure and serviceable. It takes 31 newtons to insert the grommet into the body panel and 243 newtons to pull it back out, ensuring it stays anchored during normal driving. The pin, however, slides in with only 7 newtons and releases at 152 newtons, the patent says.

Advertisement
-

Because the grommet grips the sheet metal far more tightly than the pin grips the grommet, technicians can pop the trim panel off, service wiring or components behind it, and snap everything back together without disturbing the grommet or degrading the soft overmold.

The clip survives repeated service cycles with no measurable loss of damping performance.

For drivers, the payoff is a noticeably more peaceful ride. Road rumble, panel flutter, and high-frequency buzz that often sneak into luxury cabins are absorbed at the source rather than conducted through rigid plastic. Over the life of the vehicle, the reusable design also prevents the gradual loosening that causes rattles in conventional clips. Fewer replacements mean less cabin noise from degraded parts and lower long-term maintenance costs.

Tesla’s patent shows how even the smallest hardware decisions affect the overall driving experience. By giving a mundane trim clip two distinct personalities—rigid where strength is needed, soft where silence matters—the company is quietly engineering away one more source of distraction.

If the design reaches production, future Tesla owners could enjoy an even calmer, more refined interior without ever noticing the clever little clips holding it all together.

Advertisement
-

Joey has been a journalist covering electric mobility at TESLARATI since August 2019. In his spare time, Joey is playing golf, watching MMA, or cheering on any of his favorite sports teams, including the Baltimore Ravens and Orioles, Miami Heat, Washington Capitals, and Penn State Nittany Lions. You can get in touch with joey at joey@teslarati.com. He is also on X @KlenderJoey. If you're looking for great Tesla accessories, check out shop.teslarati.com

Advertisement
Comments

News

Tesla just doubled its Miami Robotaxi geofence

Published

on

Credit: Tesla

Tesla just doubled the serviceable area that its Robotaxi platform can travel in Miami, Florida.

On November 16, Tesla announced a major expansion of its Miami service area with a message stating that it would now service substantially more of the city. A new map shows the new service area, which is roughly double the initial geofence, including key urban districts into Robotaxi for the first time.

Tesla first launched unsupervised Robotaxi rides in Miami on July 3, making it the company’s initial market outside of Texas and California. The original geofence covered a very limited portion of the western Miami-Dade area, including West Miami, Doral, Sweetwater, and Miami International Airport. It was roughly 25 square miles, before a small expansion put it at about 31.

Now, Downtown Miami, the popular Brickell neighborhood, and Miami Beach, which were deliberately left outside the boundary initially, now are included in operations. Riders can now hail Model Y vehicles booked through the Tesla Robotaxi app and have run 24 hours a day since mid-November.

Advertisement
-

The map now looks to be about 59 square miles, a roughly 92 percent increase. The new eastern edge of the geofence now includes Downtown, Bickell, Wynwood, Little Havana, and the Biscayne Bay waterfront, nailing down a lot of typical tourist locations for Miami visitors. Additionally, the new geofence also extends North, reaching Hialeah, and adding coverage closer to the airport corridor.

At its widest, the zone now stretches roughly 11 miles from west to east. Miami Beach remains outside the service area, though Elon Musk previously indicated beach coverage was “coming soon” after Florida Governor Ron DeSantis publicly called for it.

Relative to Tesla’s other markets, Miami’s roughly 59-square-mile zone is now larger than Orlando (about 26 square miles) and Tampa (about 24 square miles) combined.

It remains smaller than Texas hubs such as Austin (around 443 square miles), San Antonio (about 275), Houston (about 254), and Fort Worth (about 143), but the rapid growth brings it closer to competitor Waymo’s approximately 60-square-mile Miami footprint, which already includes beach areas.

For Miami residents and visitors, the expansion makes driverless rides practical for trips into the city’s densest commercial and residential core, offering a new option amid heavy traffic and limited parking.

For Tesla, covering higher-demand downtown corridors should increase ride volume, generate more real-world autonomy data, and strengthen its competitive position as it scales the Robotaxi network toward broader profitability and eventual Cybercab deployment. The overnight growth also signals accelerating operational confidence less than five months after the city’s launch.

Advertisement
-
Continue Reading

Cybertruck

Tesla tuner pleading to save Cybertruck also wants to build CyberSUV

Published

on

Credit: Unplugged Performance

Tesla tuner Unplugged Performance, the company pleading to save the Cybertruck, detailed in a new phase of its plan to rescue manufacturing lines from Gigafactory Texas that it would also build a three-row CyberSUV.

UP has already navigated a lot of the difficult thought work, including how it will woo Tesla to turn over the all-electric pickup’s production lines at no cost or risk to them. Tesla has signaled it will wind down Cybertruck output at Gigafactory Texas sometime around the middle of next year.

Tesla upfitter offers to keep Cybertruck alive

Unplugged, the Hawthorne-based aftermarket specialist that has tuned Teslas since 2013, first floated an open offer on November 10 and followed with a more specific “Phase 3” outline on November 15. Under the structure, outside investors would fund the new company.

Advertisement
-

The line would leave Giga Texas on Tesla’s schedule, supplier contracts would transfer, and Unplugged would hire its own staff, drawing from interested Tesla alumni, without pulling current Tesla employees or engineering resources.

Tesla would retain intellectual-property ownership, final say on specifications and brand, a quality veto, and an option to reclaim the line. In return, Tesla would collect a license fee on every vehicle plus margin on parts it continues to supply, Full Self-Driving and Robotaxi revenue, and a no-cost equity stake in the new entity.

If Unplugged cannot meet demand or capital targets Tesla sets, it would withdraw.

UP looked at the overwhelming demand for a full-size SUV, something that Tesla has had a lot of demand for but has not developed internally. A poll put out by the tuner that surveyed 892 responses showed 82 percent of voters favored a CyberSUV. There is a substantially deeper market for three-row SUVs priced above $80,000 compared to pickups.

Not to mention, the new body tooling plus limiting other changes from the Cybertruck line would enable the company to use the existing platform to produce an all-terrain family vehicle while continuing to produce Cybertruck builds at a modest incremental cost.

Tesla has already shown interest in a CyberSUV, as it hid Cybertruck-inspired clay models of what appeared to be a full-size SUV in a video last year:

Advertisement
-

Tesla appears to be mulling a Cyber SUV design

The proposal from UP also contemplates multiple configurations that would enable owners to utilize a full-fledged Robotaxi in the form of a CyberSUV, aiming to build one with conventional controls for private buyers while a no-wheel/pedal version would be available for the Robotaxi fleet.

Tesla has made it clear that its manufacturing space and cell capacity is set aside for Cybercab, but UP already has soft commitments from a conglomeration of investors, but it all hinges on Tesla’s willingness to engage.

Continue Reading

Elon Musk

Your Tesla could be in the Robotaxi fleet next month, Elon Musk claims

Published

on

Credit: @AdanGuajardo/X

Elon Musk says that Tesla could test adding customer-owned vehicles to the Robotaxi platform as soon as December.

In a reply on X to an Austin-based Uber driver who uses a Model Y with Full Self-Driving and keeps only 49-63% of fares after the platform’s cut, Musk wrote:

“Coming soon. If things well, may start trials next month. Much better to manage a fleet of cars than have to drive just one car by yourself!”

Advertisement
-

The exchange highlights the appeal of passive income from an autonomous vehicle versus actively driving for rideshare platforms.

This potential December start is technically earlier than prior company guidance, but it also aligns with the currently-projected first delivery of the Tesla Cybercab, a vehicle that has no manual controls.

Nevertheless, Tesla planned to bring customer vehicles into the fleet later on. During Tesla’s Q3 earnings call, AI leadership had pointed to roughly the second quarter of 2027 for customer vehicles joining the network. Musk’s comment suggests an accelerated pilot, most likely beginning in Austin, where Tesla’s Robotaxi service has operated longest and where new features typically roll out first.

December is also the target month for the first customer deliveries of the Cybercab. In mid-November, Tesla began inviting select buyers to purchase the purpose-built, two-seat vehicle for personal use at $29,990 plus a required $299 monthly Autonomy Subscription, with estimated deliveries in Austin.

Tesla Cybercab goes on sale for $29,990, slated for December deliveries

Those initial private Cybercabs are restricted to personal use within existing Robotaxi zones and do not automatically include commercial network participation; the large majority of Cybercabs are expected to remain Tesla-owned fleet vehicles.

Advertisement
-

The coincidence of the two December milestones underscores Tesla’s parallel paths. Customer Model Ys already on the road with FSD hardware could rapidly enlarge the vehicle pool for unsupervised trials, while the Cybercab, which is void of a steering wheel or pedals and equipped with only dedicated Robotaxi hardware, arrives as a purpose-built platform.

Hardware differences, such as additional cameras or cleaning systems on company Robotaxis, may constrain which Model Ys are eligible at the outset. Regulatory approvals, insurance arrangements, and software readiness will also determine whether the “if things go well” condition is met.

For owners, successful trials would fulfill a vision Musk first sketched in Tesla’s 2016 Master Plan: vehicles that earn money while their owners sleep or work.

Combined with the arrival of privately owned Cybercabs in the same month, December could mark the transition from Tesla-controlled Robotaxi operations to a broader ecosystem in which both company fleets and customer vehicles contribute to the company’s autonomous ride-hailing platform, which continues expanding.

Continue Reading