Tesla recently announced that it had launched the fourth phase of its Virtual Power Plant (VPP) project in South Australia. The newest phase would welcome an additional 3,000 low-income homes into the growing network.
Tesla’s VPP project in South Australia is quite ambitious, and while the initiative does not typically attract headlines like the company’s electric vehicles, its progress has been quite notable over the years. In April of last year alone, Tesla announced that it was expanding the VPP network to New South Wales, southeast Queensland, and the Australian Capital Territory.
When the project was announced in 2018, Tesla noted that the virtual power plant would consist of 50,000 homes fitted with solar panels and Powerwall batteries. The system was expected to deliver 250 MW of solar energy and 650 MWh of battery storage capacity when completed.
As noted by the electric vehicle maker in a post on its official LinkedIn account, the South Australia VPP’s fourth phase is quite unique in the way that it now includes homes that only have Tesla Powerwall batteries. This enables thousands of other homes that could not previously participate in the virtual power plant to be part of the initiative. The EV maker noted that in areas where there is surplus solar generation, battery-only installations could provide an effective solution for storing excess energy.
A look at Tesla’s official page for the South Australia virtual power plant shows that even homes with only Powerwall batteries and no solar panels could benefit from joining the program. While Powerwall-only homes do not access sustainable energy, they do enjoy blackout protection and a lower electricity rate. These two benefits alone would likely make the VPP an attractive proposition for homeowners.
A homeowner with a Powerwall-only installation provided some hints at the benefits of joining the South Australia VPP. “We’re saving about $20 a month off our electricity bills, which helps tremendously. We’re pensioners, so every bit helps. When there used to be blackouts, I’d wake up and try to get the generator started in the early hours of the morning. Now, the power just goes straight back on with the battery, and you don’t even notice,” the homeowner noted.
Don’t hesitate to contact us with news tips. Just send a message to simon@teslarati.com to give us a heads up.
News
Tesla Full Self-Driving shows stunning maneuver in Europe to silence skeptics
In a striking demonstration of autonomous driving prowess, Tesla’s Full Self-Driving (FSD) system recently showcased its capabilities on the narrow rural roads of the Netherlands. Captured in two in-car videos, the system encountered scenarios that would challenge even the most experienced human drivers.
Tesla Full Self-Driving, fresh on the heels of its approval for operation on European roads for the first time, showed off a stunning maneuver that will certainly silence any skeptics on the continent.
Fresh off its approval in the Netherlands, Full Self-Driving is working toward a significant expansion into more parts of Europe.
In a striking demonstration of autonomous driving prowess, Tesla’s Full Self-Driving (FSD) system recently showcased its capabilities on the narrow rural roads of the Netherlands. Captured in two in-car videos, the system encountered scenarios that would challenge even the most experienced human drivers.
In the first clip, a wide tractor occupied more than half the lane on a tight two-way road. Rather than braking abruptly or forcing a collision risk, FSD smoothly edged the vehicle onto the adjacent bike path—using the extra space with precision—before seamlessly returning to the lane once clear.
The second clip was equally demanding: while overtaking a group of cyclists, an oncoming car approached at speed.
FSD maintained a safe, minimal buffer to the cyclists while timing the pass perfectly, avoiding any swerve or hesitation that could unsettle passengers or other road users.
People wonder if FSD is safe on narrow European roads. Well have a look what it did when a tractor took up more than half of the road or when overtaking bicycles with fast oncoming traffic. pic.twitter.com/z37Csa09sP
— Chanan Bos (@ChananBos) April 14, 2026
This maneuver highlights FSD’s advanced spatial reasoning and predictive planning. On roads often under three meters wide, with no room for error, the system calculated available clearance in real time, incorporated shoulder and path geometry, and executed a controlled deviation without compromising safety.
It treated the bike path as a legitimate extension of navigable space, something many drivers might hesitate to do, while respecting Dutch road norms and cyclist priority.
Such feats align closely with a growing library of impressive FSD maneuvers documented on camera worldwide.
In urban Amsterdam, for instance, FSD has navigated the world’s densest cyclist environments, weaving through hundreds of unpredictable bike movements on canal-side streets with tram tracks and pedestrians.
One uncut drive showed it yielding smoothly at crossings, overtaking where needed, and even handling a near-perfect auto-park in a tight residential spot, demonstrating the same low-speed precision seen in the rural clips.
Teslas using FSD have tackled turbo roundabouts in the Netherlands, complex multi-lane circles notorious for geometry challenges, merging confidently while yielding to traffic. Similar clips depict smooth handling of construction zones, emergency vehicle pull-overs, and gated parking barriers, where the car stops precisely, waits for clearance, and proceeds without driver input.
Collectively, these examples illustrate FSD’s evolution toward handling the unpredictable.
The rural Netherlands maneuvers aren’t isolated. Instead, they reflect a pattern of spatial awareness, cyclist deference, and traffic anticipation seen from city streets to highways.
As FSD continues refining through real-world data, videos like this one are certainly building a compelling case for its readiness on Europe’s varied roads.
News
Tesla utilizes its ‘Rave Cave’ for new awesome safety feature
Part of the massive interior overhaul of both the Model 3 “Highland” and Model Y “Juniper” was the addition of interior accent lighting to help bring out the mood of the vehicle, increase the customization of the interior, and to create a unique listening experience.
Tesla is utilizing its ‘Rave Cave’ for an awesome new safety feature that will arrive with the upcoming Spring Update for 2026.
Part of the massive interior overhaul of both the Model 3 “Highland” and Model Y “Juniper” was the addition of interior accent lighting to help bring out the mood of the vehicle, increase the customization of the interior, and to create a unique listening experience.
Tesla added a Sync Lights feature that will strobe the accent strips with the beat of the music.
It is one of the most unique and one of the coolest non-functional features of a Tesla, as it does not improve the driving of the vehicle, but makes it a cool and personal addition to the interior.
However, Tesla is going to take it one step further, as the Rave Cave lights will now be used for blind spot recognition. This feature will be added as the Spring 2026 Update starts to roll out.
A lot of CRAZY new features coming with Tesla’s 2026 Spring Update, including a new FSD app!
– Self-Driving App (AI4 hardware): New app in App Launcher > Self-Driving for one-tap FSD subscriptions, activation guides, and ongoing stats.
– “Hey Grok”: Voice-activated Grok with… https://t.co/ljeYPlq9Qt— TESLARATI (@Teslarati) April 13, 2026
Tesla writes:
“Accent lights now turn red when an object is in your blind spot and your turn signal is engaged, or when an approaching object is detected while parked.”
This neat new safety feature will now increase the likelihood of a driver, who is operating their Tesla manually, of seeing the blind spot warnings that are currently available on the A pillar and on the center touchscreen.
These new alerts will now warn drivers of cross traffic as they back out of a parking space with little to no visibility of what is coming. It is a great new addition that will only increase the safety of the vehicles, while also utilizing something that is already installed in these specific Model 3 and Model Y units.
The Model 3 and Model Y were the central focus of the Spring 2026 Update, especially considering the fact that the Model S and Model X are basically gone, with only a few hundred units left. Additionally, Tesla included new Immersive Sound and Car Visualization for the Model 3 and Model Y specifically in this new update.
News
Tesla parked 50+ Cybercabs outside its Texas Factory with some crash tested
Dozens of Tesla Cybercabs have been spotted at Giga Texas crash testing facility ahead of launch.
Drone footage captured by longtime Giga Texas observer Joe Tegtmeyer shows over 50 units of Tesla Cybercab at the Austin factory campus, including several units clustered by Tesla’s on-site crash testing facility.
The outbound lot at Gigafactory Texas sits just outside the factory exit and serves as the primary staging area where finished vehicles are held before being loaded onto transport carriers or dispatched for validation testing. On any given day, the lot holds a mix of Model Y and Cybertruck units alongside the growing Tesla Cybercab fleet, as can be seen in the drone footage captured by Joe Tegtmeyer.
Roughly 50 Cybercab units are visible across the campus, parked in tight organized rows. Most of the units visible still carry steering wheels and pedals, temporary additions Tesla included to satisfy current safety regulations while the vehicles accumulate real-world data ahead of full regulatory approval for a steering wheel-free design. Tesla operates dedicated Crash Labs at both its Giga Texas and Fremont facilities that are purpose-built for controlled structural crash tests. Historically, automakers begin intensive crash testing roughly one to two months before volume production kicks off. The Cybertruck followed almost exactly that pattern. The Cybercab appears to be on the same track facility that we first saw back in October 2025. The first production Cybercab rolled off the Giga Texas line on February 17, 2026. Volume production is now targeted for April. Musk previously wrote on X that “the early production rate will be agonizingly slow, but eventually end up being insanely fast,” and separately stated Tesla is targeting at least 2 million Cybercab units per year. Commercial robotaxi service in Austin is targeted for late 2026.


