Connect with us

News

SpaceX retracts Falcon 9 booster’s landing legs a second time after speedy reuse

SpaceX technicians successfully retracted all four of Falcon 9 B1056's landing legs, a first for the company's Block 5 upgrade. The same booster has now had its legs retracted a second time. (Tom Cross)

Published

on

Following the Falcon 9 booster’s second successful NASA launch in less than three months, SpaceX recovery technicians have once again rapidly retracted B1056’s four landing legs, also reused from the booster’s May 2019 launch debut.

On the heels of Falcon 9 B1056’s first speedy, leg-retracting recovery, a repeat of the booster’s impressive landing leg retraction debut – using the same legs, no less – serves as an excellent sign that whatever hardware changes were implemented are on the right track. As part of SpaceX and CEO Elon Musk’s interim goal of launching the same Falcon 9 booster twice in 1-2 days, a speedy recovery is an absolute necessity, and landing leg retraction is just one of the dozens of ways the company will need to optimize recovery and reuse to lower average turnaround times from weeks to days.

Falcon 9 B1056 completed its successful launch debut on May 4th, 2019, landing on drone ship Of Course I Still Love You (OCISLY) to preserve an ongoing Crew Dragon failure investigation at Landing Zones 1 and 2 (LZ-1/2). Situated just a few dozen miles off the coast of Florida, OCISLY returned to port with the booster barely a day after the landing, easily the fastest drone ship return yet.

Less than two days after arriving at Port Canaveral, SpaceX technicians had already begun the landing leg retractions in what was the first actual attempt in months. Falcon 9 Block 5 debuted back in May 2018 with comments from Musk indicating that retractable legs were one of several major reusability-focused changes, but SpaceX recovery technicians never got beyond a handful of partial tests in the second half of 2018.

This ended with a truly flawless full retraction of all four landing legs on May 7th, confirmed when booster B1056 was flipped horizontally, loaded onto a powered transporter, and driven back to a SpaceX refurbishment facility with all four scorched legs installed.

https://twitter.com/_tomcross_/status/1125844276078837760

Even more impressively, although it’s impossible to know if the retracted legs were removed, inspected, and reattached during refurbishment, all four of those legs were unambiguously flown again on B1056’s second launch less than three months later. Some cursory analysis of photos of CRS-18 taken by SpaceX, NASA, and others definitively identifies all four landing legs as the same ones that flew on CRS-17 – installed in the same positions, no less.

Advertisement
The white, chalk-like features on the outside of Falcon 9 B1056’s landing legs are the incontrovertible scorch-marks of reuse. (SpaceX)
Falcon 9 B1046 displays its own scorched legs after supporting SpaceX’s first launch of a twice-flown booster in December 2018. (Pauline Acalin)

At least in the context of the Falcon family of rockets, SpaceX’s ultimate goal is to dramatically lower the cost of Falcon 9 and Heavy launches by quickly, easily, and safely reusing every part of the rocket except its orbital upper stage, which makes maybe 10-15% of hardware costs. A magnitude reduction in costs is thus out of the question for the Falcon family – a challenge that will be tackled instead by Starship and Super Heavy, a new clean-sheet launch vehicle.

Nevertheless, it’s entirely possible that Falcon 9 missions will be able to launch for 3-5 times less than their current list price ($62M) within a year or two and definitely before the family is replaced by its successor(s). In fact, according to CEO Elon Musk, SpaceX has already lowered the average base price nearly 20%, cutting it to $50M to communicate some of the financial rewards of efficient reuse to its customers.

Of course, it’s important to remember that even if SpaceX gets to a point where it could technically cut its launch prices in half (or more), breaking even on a marginal cost basis does not account for SpaceX’s desire to recoup some of the $1B+ it has spent perfecting Falcon reusability. The fact that prices have (at least according to Musk) been lowered a decent amount is a good sign that SpaceX will choose market expansion over greed, but one can never be certain and Falcon 9 and Heavy pricing may very well never reflect their true reusability.

For now, SpaceX’s rapid progress from zero landing leg retraction to retracting the same booster’s same four landing legs twice in less than three months is an excellent sign that Block 5’s capabilities continue to be refined. In terms of milestones, the first launch of a thrice-flown booster is up next for Falcon 9, as is the first reuse of a recovered Falcon fairing half (or two).

Check out Teslarati’s Marketplace! We offer Tesla accessories, including for the Tesla Cybertruck and Tesla Model 3.

Eric Ralph is Teslarati's senior spaceflight reporter and has been covering the industry in some capacity for almost half a decade, largely spurred in 2016 by a trip to Mexico to watch Elon Musk reveal SpaceX's plans for Mars in person. Aside from spreading interest and excitement about spaceflight far and wide, his primary goal is to cover humanity's ongoing efforts to expand beyond Earth to the Moon, Mars, and elsewhere.

Advertisement
Comments

News

Tesla revises FSD transfer policy on new Cybertruck trim, causing cancellations

Published

on

Credit: Tesla

Tesla has apparently revised the policy it previously had listed for Full Self-Driving transfers on the newest All-Wheel-Drive Cybertruck that the company had sold for a steal price of just $59,000 earlier this year.

After initially stating that customers who bought the pickup would be able to transfer FSD purchases, Tesla recently changed the language in those terms and conditions to reflect that this would no longer be the case.

Tesla launches new Cybertruck trim with more features than ever for a low price

The adjustment in terminology has caused a handful of orderers to cancel their reservations due to the loss of FSD transfer:

Tesla said orders for the new Cybertruck AWD must be placed by March 31, 2026, to qualify for the FSD transfer. The language in the document from earlier this year explicitly states that they “may qualify” for the transfer program, but the date of March 31 is explicitly mentioned.

Additionally, Tesla Delivery Advisors reached out to some orderers of the AWD Cybertruck, who were told there was “an update to the eligibility of the Full Self-Driving (Supervised) transfer.” Tesla stated they could:

  • proceed without the transfer,
  • upgrade to a Premium or Cyberbeast trim and request an FSD Transfer
  • cancel the order and be refunded the $250 order fee.

Tesla turning around and changing these terms will undoubtedly result in a handful of cancellations on the part of those who have placed an order for this truck. They could pay $99 per month for an FSD subscription, which is now the only option available, but having purchased the suite outright on another vehicle and being told the transfer policy would be upheld, only to have it cancelled, is a tough pill to swallow.

These moves were also made by Tesla just before deliveries were set to begin on the Cybertruck AWD configuration. Reservation holders have started receiving VINs for their trucks, and Tesla is preparing to hand over the first units.

It’s a disappointing move from Tesla that will undoubtedly make some of its fans who have bought the truck frustrated.

Continue Reading

Elon Musk

Tesla tipped its hand at where Robotaxi is heading next

Published

on

Tesla Cybercab production units rolling off the factory line in Gigafactory Texas (Credit: Tesla)
Tesla Cybercab production units rolling off the factory line in Gigafactory Texas (Credit: Tesla)

In the world of autonomous ride-hailing, there are only a handful of names. Among those few companies lies a strategy play by each to keep the opposition on their toes. Tesla, on the other hand, already tipped its hand at where it is headed next.

Tesla has signaled its next major push in the autonomous ride-hailing market by filing for an Autonomous Vehicle Network Company permit in Nevada (Docket 26-05015). Through Tesla Robotaxi, LLC, the company seeks approval to operate up to 5,000 robotaxis in Clark County, including high-traffic areas like Las Vegas and Henderson airports, within the first 12 months of launch.

This filing builds on Tesla’s earlier testing approvals from the Nevada DMV in September 2025 and preparations such as maintenance hubs in the Las Vegas area. Nevada represents a strategic expansion into a major tourist destination, where high visitor volumes could drive strong utilization and showcase the reliability of unsupervised autonomy to a broad audience.

Approval would mark a significant step toward commercial operations in a new state, following progress in Texas.

Tesla’s shareholder decks and earnings calls have clearly outlined these ambitions. In the Q4 2025 shareholder deck, the company listed planned Robotaxi coverage for the first half of 2026, explicitly naming Las Vegas alongside Phoenix, Miami, Orlando, and Tampa, with Dallas and Houston already advancing. Austin was noted as “ramping unsupervised,” while the Bay Area remained in safety-driver mode.

By Q1 2026, the deck updated statuses to reflect launches in Dallas and Houston, with “preparations underway” for the remaining cities, including Las Vegas. Paid Robotaxi miles nearly doubled sequentially in Q1, underscoring momentum even as broader timelines adjusted slightly for regulatory and operational readiness.

On earnings calls, CEO Elon Musk and executives have emphasized a phased rollout prioritizing safety. Unsupervised operations in Texas have shown strong results with no reported accidents or injuries in the program. Tesla continues groundwork in additional major U.S. metros through testing and permitting, positioning it to scale quickly once approvals clear.

This Nevada move aligns with Tesla’s vision of transforming from an EV maker into an AI and robotics leader. The forthcoming Cybercab, which started production at Giga Texas in April, is expected to eventually dominate the fleet, replacing many Model Y vehicles and driving down costs to enable affordable rides.

For investors and the industry, this signals Tesla’s intent to dominate key Sun Belt and tourist markets where weather, regulations, and demand favor rapid scaling. Success in Las Vegas could validate the model for denser urban and high-tourism environments, accelerating the shift toward a future where robotaxis generate meaningful revenue.

Las Vegas will also expand knowledge among the general public at Tesla’s capabilities, helping people experience driverless ride-hailing from several companies during their time on The Strip.

Continue Reading

Investor's Corner

Tesla just did something in South Korea that no foreign carmaker has ever done

Tesla’s Model Y just became South Korea’s best-selling car, beating every domestic model in May.

Published

on

By

Tesla did something last month that no foreign car has ever done in South Korea by outselling every vehicle in the country, domestic or imported, finishing the month with Model Y as the single best-selling car across the entire Korean market. According to data from the Korea Automobile Importers and Distributors Association released on June 4, the Model Y recorded 8,762 units sold in May, pushing the Kia Sorento into second place at 7,836 units and the Hyundai Grandeur into third at 5,183 units. It is the first time an imported vehicle has outsold every domestic model on a single-month basis.

Tesla imported 10,866 cars into South Korea in May, making it the top import brand for the fourth consecutive month. BMW followed at 6,555 units, less than two-thirds of Tesla’s total, while BYD registered just 1,032 units. The combined domestic sales of GM Korea, Renault Korea, and KG Mobility last month totaled just 7,019 units, meaning a single Tesla model outsold three Korean automakers combined.

Tesla FSD earns high praise in South Korea’s real-world autonomous driving test

 

South Korea has historically been one of the hardest markets for foreign automakers to crack. Hyundai and Kia together control close to 70% of the overall market and carry deep consumer loyalty built over decades. Tesla’s path into this market was an uphill battle due to high import duties, limited service infrastructure, and early skepticism about charging networks. In 2024, the Model Y was the best-selling imported car in South Korea with 18,717 units for the full year. By 2025, after the Juniper refresh, it cleared 50,000 units and took the top spot among all EVs.

Year to date, Tesla has a 250.8% increase in the country over the same period last year, and now holds a 30.8% share of the entire imported car segment for 2026. EVs as a category represented 48.6% of all imported passenger car registrations in May. As Teslarati has reported, the Juniper refresh brought meaningful improvements to range, interior quality, and ride refinement that addressed the most common criticisms of earlier Model Y versions. Those upgrades appear to be resonating in markets like South Korea where buyers compare Tesla directly against high end domestic competitors.

Continue Reading