News
Tesla Model Y welding efficiencies paves way to better build quality, top safety rating
Tesla CEO Elon Musk said the Model Y would be the safest midsized SUV on the road when it was unveiled in March 2019. Sandy Munro’s 11th episode of his Model Y breakdown series shows how the vehicle’s weld quality, added foam reinforcements, and “aluminum crush plate” could solidify Musk’s claims about the vehicle’s safety, while opening the doors towards better build quality.
Munro states the company’s focus on one welding technique has left him with nothing but positive remarks about the vehicle’s build quality. “The distancing is great. The edge is perfect. This is the kind of stuff that any car company…would be happy to have these kinds of welds all the way around,” he said.
The Model 3’s weld techniques were discussed during Munro’s teardown of the sedan in 2018 when he criticized Tesla’s use of multiple weld techniques. After stating the Model 3’s welding made it look like “a science project,” Munro claims the use of a single technique would have allowed for a more consistent build quality throughout the vehicle.
True to form, Tesla appears to have taken Munro’s suggestion for the Model Y. Tesla was consistent with the Model Y’s welds, and it surely impressed Munro. The electric car maker also used self-piercing rivets, or SPRs, to join dissimilar materials, like steel and aluminum. These two materials are present on the rear door flange welds, making for a quality build on the vehicle’s door frames.
Additionally, Tesla installed head impact countermeasures, or HICs, on several locations. These are used to soften the blow in the event of an accident where a passenger’s head collides off of a portion of the vehicle’s interior. Tesla’s decision to add this was a nice touch in Munro’s opinion, as it only increases the safety of the vehicle.
The Model Y is also equipped with a unique piece of aluminum in the upper lip of the trunk. Munro calls it the “aluminum rear crush plate/bracket.” The part holds the outer portions of the chassis together. The piece also is responsible for folding in the event of a rear collision.
This increases not only safety but also cost-effectiveness if an accident occurs because it will keep the outer frame of the vehicle from being compromised, Munro says. It is easy to remove thanks to a few bolts that are visible and readily accessible, and would also save a driver perhaps hundreds of dollars in labor costs at a shop. “If I hit a pole, it will cost me a few bucks, but it won’t cost me the whole damn car,” Munro jokes.
Under the rear seats, Tesla has installed not only EPP foam, which offers cost-efficiency and effectiveness, but also the Model 3’s floor cover plate. This is used to hold the rear seating assembly in place and separate the cabin from the undercarriage of the car where the battery is fitted. Tesla’s utilization of this Model 3 part proved the part was perfect for the Model Y, and the company has plenty in its stock bin, saving them time and money throughout the manufacturing process of the new vehicle.
Tesla’s already high safety marks for the Model 3 were improved even further in the Model Y thanks to recommendations from Munro. The auto expert’s discontent with the Model 3’s welding eventually led to improvements in the Model Y’s build quality. Tesla’s decision to add other safety features could make the vehicle Tesla’s safest car yet. Just as Elon Musk said a year ago, the Model Y may very well be the most reliable midsize crossover available to consumers.
Watch Munro Live’s breakdown of the Model Y’s safety features below.
News
Tesla gives HW3 owners another massive update
It was an “at last” moment for HW 3 owners, who have waited for an update on the capabilities of their vehicles for some time. After CEO Elon Musk finally admitted last week that the HW3 vehicles would not be capable of unsupervised FSD, it appears Tesla is bringing a new, more transparent tone to those owners.
Tesla is giving Hardware 3 vehicle owners another massive update, the second major communication the company has given to those drivers after what seemed like years of being left out to dry.
The company, which plans to launch a Full Self-Driving version 14 iteration that is compatible with these cars, which have older chips, is now planning to expand the rollout of the v14 Lite offering to other markets, it said on X.
Tesla said:
“Following future rollout of FSD V14 Lite for HW3 vehicles in the US, we plan on expanding V14 Lite to additional international markets. This update ensures that HW3 vehicle owners will continue to benefit from ongoing software updates. Since international rollout is subject to several factors (completion of technical verification, regional adaptation & relevant regulatory approvals), we can’t provide definitive dates at the moment, but will provide updates on a rolling basis.”
This announcement comes at a critical time for HW3 owners, many of whom purchased Full Self-Driving (FSD) capability years ago with promises of ongoing support and future-proofing.
Following future rollout of FSD V14 Lite for HW3 vehicles in the US, we plan on expanding V14 Lite to additional international markets.
This update ensures that HW3 vehicle owners will continue to benefit from ongoing software updates.
Since international rollout is subject to…
— Tesla (@Tesla) April 29, 2026
HW3, introduced in 2019, powers vehicles from roughly 2019 to early 2023 models. While newer AI4 hardware has advanced rapidly, HW3 owners have felt increasingly left behind, with their last major update stuck around version 12.6 since early 2025.
It was an “at last” moment for HW 3 owners, who have waited for an update on the capabilities of their vehicles for some time. After CEO Elon Musk finally admitted last week that the HW3 vehicles would not be capable of unsupervised FSD, it appears Tesla is bringing a new, more transparent tone to those owners.
V14 Lite represents a significant optimization effort. Tesla has confirmed it will bring many core features of the full V14 release, currently running on more powerful hardware, to the more constrained HW3 platform.
Expected capabilities include improved handling of complex urban scenarios, better reverse driving, enhanced parking features, and smoother overall autonomy, albeit in a “lite” form tailored to HW3’s compute limits. Tesla’s head of Autopilot, Ashok Elluswamy, noted during the Q1 2026 earnings call that the update is targeted for late June in the U.S.
Tesla is releasing a modified version of FSD v14 for Hardware 3 owners: here’s when
The international expansion is particularly meaningful for owners in Europe, Asia, Australia, and other regions where FSD rollout has lagged due to regulatory hurdles.
Tesla emphasized that timing remains fluid, dependent on “technical verification, regional adaptation & relevant regulatory approvals.” No firm dates were provided, but the company pledged rolling updates as milestones are achieved.
This move addresses growing concerns that Tesla might abandon legacy hardware. With the recent admission that its capabilities are limited and not capable of Tesla’s grand autonomy ambitions, owners are finally in the light of truth, with more honesty being put forth as the company navigates this chapter.
For Tesla, keeping HW3 relevant strengthens customer loyalty and protects the value of older vehicles. It also buys time as the company pushes toward broader regulatory approvals and unsupervised autonomy on newer platforms.
While V14 Lite isn’t the full unsupervised experience once promised, it delivers tangible improvements and signals that HW3 owners are not being forgotten.
As Tesla continues its rapid AI and autonomy evolution, this update underscores a key principle: software can breathe new life into existing hardware. For tens of thousands of HW3 drivers worldwide, V14 Lite could mark the beginning of a renewed era of confidence in their vehicles.
Elon Musk
SpaceX Board has set a Mars bonus for Elon Musk
SpaceX has given Elon Musk the goal to put one million people on Mars.
SpaceX’s board approved a compensation plan for Elon Musk that ties his pay directly to colonizing Mars and building data centers in outer space. The details surfaced this week after Reuters reviewed SpaceX’s confidential registration statement filed with the Securities and Exchange Commission, making it one of the first concrete looks inside the company’s financials ahead of a public offering.
The pay package will reportedly award Musk 200 million super-voting restricted shares if the company hits a market valuation milestone, with the most ambitious targets going further. To unlock the full award, SpaceX would need to reach a $7.5 trillion valuation and help establish a permanent human settlement on Mars with at least one million residents. Additional incentives are tied to developing space-based computing infrastructure capable of delivering at least 100 terawatts of processing power.
SpaceX wins its first MARS contract but it comes with a catch
Long before SpaceX filed anything with the SEC, Elon Musk had already spent years framing Mars colonization as an insurance policy against human extinction. The philosophy traces back to at least 2001, when Musk first began researching Mars missions independently, before SpaceX even existed. By 2002 he had founded the company with Mars as the stated long-term goal.
In a 2017 presentation at the International Astronautical Congress, Musk outlined the specific vision that still underpins SpaceX’s architecture today. He described a self-sustaining city on Mars requiring roughly one million people to become viable, the same number now written into his compensation package.
SpaceX’s Starship, still in active development, was designed from the ground up to support the eventual colonization of Mars. Musk has stated publicly that getting the cost per ton to Mars below $100,000 is necessary to make mass migration economically feasible. Everything from Starship’s payload capacity to its full reusability targets flows from that single constraint. One can say that Musk’s latest compensation package has put a formal valuation on Mars for the first time.
SpaceX is targeting an IPO around June 28, Musk’s birthday, at a valuation of approximately $1.75 trillion. Between the Mars rover contract, the Golden Dome software group, Space Force satellite launches, and now a pay structure built around interplanetary colonization, SpaceX has become the single most consequential contractor in American space and defense. The IPO will put a public price tag on all of it for the first time.
Earlier this week, we wrote a story on how Tesla is launching a new Supercharging Queue system to mitigate problems between drivers when there is a wait to charge.
Rather than potentially having people end up in a physical conflict, Tesla’s approach is to determine who is next to charge based on geographic data.
Tesla launches solution to end Supercharger fights once and for all
But some companies, notably Tesla’s biggest rival in China, BYD, are taking a different approach, focusing on charging speeds rather than how they will manage delays.
BYD’s approach, especially with its tests of ultra-fast “Flash Charging” technology, is to eliminate the length of a charging session. At the heart of this strategy is BYD’s second-generation Blade Battery paired with 1,500-kW Flash Chargers.
Real-world FLASH Charging in action.
⚡ 10% → 70% in 5 minutes
⚡ 10% → 97% in 9 minutesIntroducing BYD’s 2nd Generation Blade Battery + FLASH Charging Technology.
20,000 stations will bring faster, safer, and smarter EV charging across China by the end of 2026. pic.twitter.com/uzQC8q1xGf
— BYD (@BYDCompany) March 9, 2026
Unveiled earlier this year, the system charges compatible vehicles from 10 percent to 70 percent state of charge in just five minutes and from 10 percent to 97 percent in nine minutes.
Real-world demonstrations on models like the Yangwang U7 and Denza Z9 GT have shown the tech delivering roughly 250 miles (400 kilometers) of range in just five minutes. This would essentially match or beat the time it takes to fill a gas tank.
Sometimes, gas pumps get congested, and there are lines. You rarely see conflicts at pumps because filling up a tank rarely takes more than five minutes.
Tesla’s fastest Supercharger build currently is the v4, which can deliver up to 325 kW for Cybertruck and 250 kW for other models, but there are “true” sites that are capable of up to 500 kW. This enables speeds of up to 1,000 miles per hour, or 1,400 miles for 350 kW-capable vehicles.
The breakthrough stems from BYD’s vertically integrated ecosystem: a new 1,000-volt architecture, 10C charging rates, and proprietary silicon-carbide chips that minimize internal resistance while protecting battery health.
The company plans to install 20,000 Flash Charging stations across China by the end of 2026, with thousands already operational and global expansion eyed for Europe and beyond later this year.
Early rollout targets popular models, including upgrades to high-volume sellers like the Seal and Sealion series, bringing five-minute charging to mainstream prices around 100,000 yuan (about $14,000).
This approach contrasts sharply with Tesla’s software solution. Tesla’s Virtual Queue uses geofencing and the app to assign turns at crowded sites, addressing driver disputes and idle time. It’s a clever fix for today’s network realities.
Yet, BYD’s philosophy is simpler: make charging so fast that waits barely exist. A five-minute stop becomes as convenient as a gas-station visit, reducing station dwell time, easing grid strain, and lowering range anxiety for long trips.
For consumers, the difference is potentially tangible. They’ll spend more time driving and less time parked. It is just another way Tesla and BYD are pushing one another to improve the overall experience of EV ownership.
Tesla gives HW3 owners another massive update
SpaceX Board has set a Mars bonus for Elon Musk
